DIN EN 14527-2016 Shower trays for domestic purposes German version EN 14527 2016《家用淋浴盆 德文版本EN 14527-2016》.pdf

1、December 2016 English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.70!%V/“2595112www.din.de

2、DIN EN 14527Shower trays for domestic purposes;English version EN 14527:2016,English translation of DIN EN 14527:2016-12Duschwannen fr den Hausgebrauch;Englische Fassung EN 14527:2016,Englische bersetzung von DIN EN 14527:2016-12Receveurs de douche usage domestique;Version anglaise EN 14527:2016,Tra

3、duction anglaise de DIN EN 14527:2016-12SupersedesDIN EN 14527:201012See start of applicationwww.beuth.deDocument comprises 29 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN 14527:2016-12 2 A comma is used as the

4、decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeig

5、er (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 14527:2010-12, may be used in parallel with th

6、is standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14527:2016) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances” (

7、Secretariat: UNI, Italy). The responsible German body involved in its preparation was DIN-Normenausschuss Wasserwesen (DIN Standards Committee Water Practice), Working Committee NA 119-05-18-10 UA Bade- und Duscheinrichtungen. Amendments This standard differs from DIN EN 14527:2010-12 as follows: a)

8、 Clause 7 “Dangerous substances has been newly added; b) the specifications for marking have been modified; c) the former Clause 10 “Evaluation of conformity” has been replaced by Clause 10 “Assessment and verification of constancy of performance AVCP; d) Annex ZA “Clauses of this European Standard

9、addressing the provisions of the EU Construction Products Regulation (Regulation (EU) No 305/2011) has been updated. Previous editions DIN EN 14527: 2006-08, 2010-12 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14527 June 2016 ICS 91.140.70 Supersedes EN 14527:2006+A1:2010English Version Sho

10、wer trays for domestic purposes Receveurs de douche usage domestique Duschwannen fr den Hausgebrauch This European Standard was approved by CEN on 30 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

11、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, F

12、rench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgar

13、ia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turk

14、ey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. R

15、ef. No. EN 14527:2016 E2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Classification . 6 5 Requirements for class 1 products . 6 5.1 General 6 5.2 Cleanability 6 5.2.1 Appearance of surface . 6 5.2.2 Drainage of water 6 5.3 Durability . 6 5.3.1

16、 General 6 5.3.2 Stability of bottom 6 5.3.3 Resistance to chemicals and staining agents 6 5.3.4 Resistance to temperature changes . 7 6 Requirements for class 2 products . 7 6.1 General 7 6.2 Cleanability 8 6.2.1 Appearance of surface . 8 6.2.2 Drainage of water 8 6.3 Durability . 8 6.3.1 General 8

17、 6.3.2 Materials . 8 7 Dangerous substances . 8 8 Test methods 8 8.1 Stability of the bottom of the shower tray . 8 8.1.1 Test apparatus 8 8.1.2 Determination of the load 8 8.1.3 Procedure. 9 8.2 Chemical resistance 9 8.2.1 Principle . 9 8.2.2 Test apparatus and chemicals 9 8.2.3 Test specimens 10 8

18、.2.4 Procedure 10 8.2.5 Expression of results . 11 8.3 Resistance to temperature changes 11 8.3.1 Test apparatus. 11 8.3.2 Procedure 11 9 Marking, labelling and packaging 11 10 Assessment and verification of constancy of performance - AVCP 12 10.1 General . 12 10.2 Type testing 13 10.2.1 General . 1

19、3 10.2.2 Samples, testing and compliance criteria 13 EN 14527:2016 (E) DIN EN 14527:2016-12 3 10.3 Factory production control . 14 10.3.1 General . 14 10.3.2 Equipment . 14 10.3.3 Raw materials and components 15 10.3.4 Product testing and assessment 15 10.3.5 Non-conforming products . 15 10.3.6 Corr

20、ective action . 15 Annex A (informative) Materials 16 A.1 Synthetic materials 16 A.2 Ceramic materials. 16 A.2.1 Vitreous china 16 A.2.2 Fireclay . 16 A.3 Enamelled materials 16 A.3.1 Enamelled cast iron . 16 A.3.2 Enamelled steel . 16 A.4 Stainless steel . 17 A.5 Natural stone 17 Annex B (informati

21、ve) Surface of shower trays 18 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 19 ZA.1 Scope and relevant characteristics 19 ZA.2 Procedure for assessment and verification of constancy of performance (AVCP) of shower tra

22、ys . 20 ZA.2.1 System of AVCP 20 ZA.2.2 Declaration of performance (DoP) . 20 ZA.3 CE marking and labelling . 25 Bibliography . 27 EN 14527:2016 (E) DIN EN 14527:2016-12 4 European foreword This document (EN 14527:2016) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the s

23、ecretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is d

24、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14527:2006+A1:2010. This document has been prepared under a mandate given to CEN by the

25、 European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No 305/2011 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA which is an integral part of this European Standard. According

26、to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gree

27、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 14527:2016 (E) DIN EN 14527:2016-12 5 1 Scope This European Standard specifies requirements, t

28、est methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturers instructions, will satisfy cleanability and durability when used for personal hygiene. This stan

29、dard is applicable to all sizes and shapes of shower trays. This standard does not cover shower trays for use with medical provisions. NOTE 1 For the purpose of this standard the term “domestic purposes” includes use in hotels, accommodation for students, hospitals and similar buildings. NOTE 2 Anne

30、x A lists characteristics of materials commonly used for manufacturing shower trays. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For u

31、ndated references, the latest edition of the referenced document (including any amendments) applies. EN 251, Shower trays - Connecting dimensions EN ISO 28706-1:2011, Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical

32、corrosion by acids at room temperature (ISO 28706-1:2008) EN ISO 28706-2:2011, Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:20

33、08) EN ISO 28706-3:2011, Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008) 3 Terms and definitions For the purposes of this document, the follo

34、wing terms and definitions apply. 3.1 shower tray sanitary appliance that collects the water from washing of the human body under a shower and directs it to a waste outlet 3.2 cleanability characteristics which allow the surface intended to come into contact with water to be non-absorbent and readil

35、y kept visually free from dirt and/or stains when subject to a maintenance regime which may include, when appropriate, specific instructions for use and care specified by the manufacturer 3.3 durability attributes of materials and their surfaces intended to come into contact with water, which allow

36、the anticipated working life of the product EN 14527:2016 (E) DIN EN 14527:2016-12 6 4 Classification Class 1: Products complying with the requirements of Clause 5. Class 2: Products complying with the requirements of Clause 6. 5 Requirements for class 1 products 5.1 General The manufacturer shall p

37、rovide instructions with each shower tray covering installation and care. NOTE Annex B gives advice which manufacturers can include in their instructions. 5.2 Cleanability 5.2.1 Appearance of surface When a shower tray is inspected under strong and oblique illumination, the surfaces intended to come

38、 into contact with water shall be visibly smooth, non-absorbent and free from inaccessible corners that would impair cleanability. NOTE Surfaces with cracks, chips, crazing and other similar defects are not considered to be smooth. 5.2.2 Drainage of water Shower trays shall have at least one waste o

39、utlet hole. The dimensions of the waste outlet hole shall comply with the requirements of EN 251. Other dimensions are permissible, if the manufacturer provides or recommends a suitable waste fitting. All water shall empty from the shower tray unless prevented by surface tension. 5.3 Durability 5.3.

40、1 General Conformance with the requirements of 5.3.2 to 5.3.4 give an assurance of durability. 5.3.2 Stability of bottom When tested in accordance with 8.1, there shall be no permanent distortion or other defects, e.g. cracks, such that the requirements of 5.2.2 are not satisfied. 5.3.3 Resistance t

41、o chemicals and staining agents 5.3.3.1 General When shower trays, other than those made from the materials specified in 5.3.3.2, are tested in accordance with 8.2, the surface finish shall be unaffected by the chemicals and staining agents specified in Table 1 except for superficial surface changes

42、 which are removable with water or with water and the specified abrasive agent. Experience has shown that shower trays made of glazed ceramics comply with these requirements. EN 14527:2016 (E) DIN EN 14527:2016-12 7 Table 1 Chemicals and staining agents Family Product Acids Acetic acid (CH3COOH), 10

43、 % V/V Alkalines Sodium hydroxide (NaOH), 5 % m/m Alcohols Ethanol (C2H5OH), 70 % V/V Bleaches Sodium hypochlorite (NaOCI), 5 % active chlorine (CI2) aStaining agents Methylene blue, 1 % m/m aThe above specified bleach may be replaced by sodium percarbonate (2Na2CO3 3H2O2) prepared as follows: Disso

44、lve 1 g of a commercial available powdery bleach based on sodium percarbonate containing 15 % to 30 % of the active component in 100 ml de-ionized water at room temperature.5.3.3.2 Particular requirements for shower trays made of enamelled steel and enamelled cast iron Shower trays made from enamell

45、ed steel and enamelled cast iron shall comply with the requirements given in Table 2. Table 2 Requirements for shower trays made of enamelled steel and enamelled cast iron Requirement Parameter Test method Resistance to boiling water 10 g/m2EN ISO 28706-2:2011, Clause 13 Resistance to cold citric ac

46、id Class 2aEN ISO 28706-1:2011, Clause 9 Resistance to boiling citric acid 5 g/m2EN ISO 28706-2:2011, Clause 10 Resistance to cold sulphuric acid Class 2aEN ISO 28706-1:2011, Clause 10 Resistance to alkali solutions 8 g/m2Testing in accordance with EN ISO 28706-2:2011, Clause 14 Test solution in acc

47、ordance with EN ISO 28706-3:2011, Clause 9 Duration of test: 2,5 h aClass 2 refers to EN ISO 28706-1 5.3.4 Resistance to temperature changes When tested in accordance with 8.3, all shower trays shall show no evidence of distortion or other defects, e.g. crazing, which will impair their cleanability.

48、 Experience has shown that shower trays manufactured from the stainless steel grades listed in Annex A, enamelled steel, enamelled cast iron and glazed ceramics comply with this requirement. 6 Requirements for class 2 products 6.1 General The manufacturer shall provide instructions with each shower

49、tray covering installation and care. NOTE Annex B gives advice which manufacturers can include in their instructions. EN 14527:2016 (E) DIN EN 14527:2016-12 8 6.2 Cleanability 6.2.1 Appearance of surface When a shower tray is inspected under strong and oblique illumination, the surfaces intended to come into contact with water shall be visibly smooth, non-absorbent and free from inaccessible corners that would impair the cleanability. NOTE Surfaces with cracks, chips, crazing and othe