DIN EN 14810-2006 Surfaces for sports areas - Determination of spike resistance English version of DIN EN 14810 2006-06《运动场地面 长钉阻力测定》.pdf

1、 DEUTSCHE NORM June 2006DIN EN 14810 ICS 97.220.10 Surfaces for sports areas Determination of spike resistance English version of DIN EN 14810:2006-06 Sportbden Bestimmung der Bestndigkeit gegen Spikes Englische Fassung DIN EN 14810:2006-06 Document comprises 8 pages No part of this standard may be

2、reproduced without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 6 www.din.de www.beuth.de !,o$4“10.06 9760117DIN EN 14810:2006-06 2 National forewo

3、rd This standard has been prepared by CEN/TC 217 Surfaces for sports areas (Secretariat: United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee NA 005-01-20 AA Kunststoffflche

4、n. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14810April 2006ICS 97.220.10English VersionSurfaces for sports areas - Determination of spike resistanceSols sportifs - Dtermination de la rsistance aux pointes Sportbden - Bestimmung der Bestndigkeit gegen SpikesThis European Standard was approve

5、d by CEN on 20 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalsta

6、ndards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to

7、the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

8、y, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and

9、by any means reservedworldwide for CEN national Members.Ref. No. EN 14810:2006: EEN 14810:2006 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Principle4 4 Apparatus .4 5 Test specimen5 6 Conditioning.5 7 Procedure .5 8 Expression of results 6 9 Test report 6 EN 14810:2006 (E) 3 F

10、oreword This document (EN 14810:2006) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th

11、e latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, C

12、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14810:2006 (E) 4 1 Scope This European Stan

13、dard specifies a method for the determination of the resistance of a synthetic sports surface to spikes. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated refere

14、nces, the latest edition of the referenced document (including any amendments) applies. EN 12230, Surfaces for sports areas Determination of tensile properties of synthetic sports surfaces 3 Principle A test specimen of the sports surface is exposed to a wearing process by a metal roller fitted with

15、 spikes. The differences in tensile strength and elongation at break of the synthetic sports surface, measured before and after the wearing process, are a measure of the resistance of the surface to spikes. 4 Apparatus 4.1 Spike apparatus, comprising a platform fitted with a rotating vertical shaft

16、powered by an electric motor with adjustable speed. 4.2 Roller with spikes (see Figure 1), consisting of a horizontal spindle fitted with 12 wheels having a thickness of (10 1) mm and a diameter of (36 1) mm. 10 of the wheels shall be fitted with six spikes each, the spikes having a length of (9 1)

17、mm and a diameter at the base of (5 1) mm. Each of the 12 wheels shall be completely free to rotate, both on the spindle and relative to its neighbours. The roller shall be centrally mounted on the vertical shaft of the spike apparatus, in such a way that it rotates with the shaft but is able to mov

18、e freely in the vertical direction. The total mass of the roller shall be adjusted to (10 0,1) kg. EN 14810:2006 (E) 5 Dimensions in millimetres Figure 1 Metal roller fitted with spikes 5 Test specimen Prepare four test specimens of the synthetic sports surface each having dimensions of 180 mm 220 m

19、m. One specimen shall be used for the initial determination of tensile properties. Two specimens shall be subjected to the wear process and shall then be used for determining the tensile properties after wear. The fourth specimen shall be set aside as a reference. 6 Conditioning The test shall be ca

20、rried out under laboratory conditions at a temperature of (23 2) C and a relative humidity of (50 10) %. 7 Procedure Carry out tensile tests according to EN 12230 on five tensile test pieces cut from one test specimen. Adjust the speed of the electric motor to (20 2) rev/min. Fasten the second test

21、specimen in the holder on the platform of the spike apparatus. Switch on the motor and let it run for (1 200 20) rev. Remove the test specimen from the platform. Repeat this procedure on a third test specimen. Carry out tensile tests according to EN 12230 on five tensile test pieces from the areas o

22、f a diameter of (140 10) mm of the second and third test specimens affected by the spikes. EN 14810:2006 (E) 6 Visually examine the worn third specimen with the naked eye. Bend the third test specimen affected by the spikes over a mandrel with a diameter of (70 5) mm. Describe obvious changes, such

23、as cracks, clear removal of material particles from the surface, wear of the surface, in the specimen in comparison to the specimen not affected by spikes. Denote such changes as visual damage. 8 Expression of results The resistance to spikes shall be expressed in terms of the changes in tensile str

24、ength T and elongation at break E resulting from the effects of spikes. Calculate the average tensile strength and elongation at break before wear T1and E1and after wear T2and E2. Calculate the change of tensile strength, X, using the formula: 121100TTXT=(1) where X is the change in tensile strength

25、, expressed as a percentage (%); T1is the initial tensile strength, expressed in kilopascal (kPa); T2is the tensile strength after wear, expressed in kilopascal (kPa). Calculate the change of elongation at break, Y, using the formula: 121100EEYE=(2) where: Y is the change in elongation at break expr

26、essed as a percentage (%); E1is the initial elongation at break, expressed in millimetres (mm); E2is the elongation at break after wear, expressed in millimetres (mm). 9 Test report The test report shall include the following information: a) reference to this European Standard, i.e. EN 14810:2006; b) description of the nature of the test surface; c) description of visual damage, as described in Clause 7; d) test results X and Y expressed in accordance with Clause 8; e) details of any deviation from this procedure and additional relevant observations.