DIN EN 14870-2-2005 Petroleum and natural gas industries - Induction bends fittings and flanges for pipeline transportation systems - Part 2 Fittings (ISO 15590-2 2003 modified) En.pdf

1、November 2005DEUTSCHE NORM Normenausschuss Erd l- und Erdgasgewinnung (N G) im DINPreisgruppe 15DIN Deutsches Institut f r Normung e.V. Jede Art der Vervielf ltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut f r Normung e. V., Berlin, gestattet.ICS 23.040.40; 75.200G7= 96549

2、55www.din.deXDIN EN 14870-2Erd l und Erdgasindustrie Im Induktionsverfahren hergestellte Rohrb gen, Fittings und Flansche f r Rohrleitungstransportsysteme Teil 2: Fittings (ISO 155902:2003 modifiziert);Englische Fassung EN 148702:2004Petroleum and natural gas industries Induction bends, fittings and

3、 flanges for pipeline transportation systems Part 2: Fittings (ISO 155902:2003 modified);English version EN 148702:2004Industries du ptrole et du gaz naturel Coudes d induction, raccords et brides pour systmes de transport par conduites Partie 2: Raccords (ISO 155902:2003 modifie);Version anglaise E

4、N 148702:2004Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 36 SeitenB55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 DIN EN 14870-2:2005-11 2 Nationales Vorwort Diese Europische Norm EN 14870-2:2004 wurde vom Technischen Komitee CEN/TC 12

5、 Materialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgasindustrie (Sekretariat: Frankreich) erstellt. Es handelt sich dabei um die bernahme der modifizierten Fassung von ISO 15590-2:2003, erarbeitet von ISO/TC 67 Materials, equipment and offshore structures for petrole

6、um, petrochemical and natural gas industries, Subkomitee SC 2 Pipeline transportation systems. Durch den Ausschluss von Gasversorgungsleitungen an Land, fr die das CEN/TC 234 zustndig ist, kam nur eine modifizierte bernahme der ISO 15590-2:2003 in Frage und damit auch eine nderung der Norm-Nummer in

7、 EN 14870-2. Fr Deutschland war der Normenausschuss Erdl- und Erdgasgewinnung (NG), Arbeitsausschuss NG 2 Fernleitungssysteme an der Erarbeitung dieser Norm beteiligt. Diese Europische Norm enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 13/1983 nur die englische Originalfassung der EN-Norm

8、. B55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14870-2December 2004ICS 23.040.40; 75.200English versionPetroleum and natural gas industries - Induction bends, fittingsand flanges for pipeline transportation systems - Part 2: F

9、ittings(ISO 15590-2:2003 modified)Industries du ptrole et du gaz naturel - Coudes dinduction,raccords et brides pour systmes de transport parconduites - Partie 2 : Raccords (ISO 15590-2:2003modifie)Erdl- und Erdgasindustrie - Im Induktionsverfahrenhergestellte Rohrbgen, Fittings und Flansche frRohrl

10、eitungstransportsysteme -Teil 2: Fittings (ISO 15590-2:2003 modifiziert)This European Standard was approved by CEN on 30 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national s

11、tandard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other

12、language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

13、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagemen

14、t Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14870-2:2004: EB55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EN 14870-2:2004 (E) 2 Contents page Explanatory No

15、te 3 Foreword4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .8 4 Symbols and abbreviated terms 8 5 Designation 10 6 Pressure rating and design 10 6.1 General10 6.2 Tees and headers.10 6.3 Extruded outlet headers10 7 Information to be supplied by the purchaser .11 7.1 Pr

16、incipal information.11 7.2 Supplementary information11 8 Manufacturing 12 8.1 Manufacturing procedure specification 12 8.2 Starting material.13 8.3 Fitting manufacture .13 9 Testing and inspection15 9.1 General requirements15 9.2 Extent of testing and inspection 15 9.3 Chemical composition 17 9.4 Me

17、chanical testing.17 9.5 Non-destructive testing.23 9.6 Dimensions.25 9.7 Gauging 25 9.8 Hydrostatic testing 25 10 Inspection document.25 11 Marking .25 Annex A (normative) Design calculations.27 Annex B (normative) Proof test30 Annex ZA (normative) Normative references to international publications

18、with their corresponding European publications 33 Bibliography 34 B55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EN 14870-2:2004 (E) 3 Explanatory Note ISO 15590-2:2003, developed within ISO/TC 67 SC 2, has been taken over as a European Standard EN 14870-2 (ISO 15590-2:2003 mod

19、ified). The scope of ISO/TC 67/SC 2 is pipeline transportation systems for the petroleum and natural gas industries without exclusions. However in CEN, the scopes of CEN/TC 12 and CEN/TC 234 overlapped until 1995.This scope overlap caused problems for the parallel procedure for the above-mentioned i

20、tems. The conflict in scope was resolved when both the CEN/Technical Committees and the CEN/BT took the following resolution: Resolution BT 38/1995: Subject: Revised scope of CEN/TC 12 “BT endorses the conclusions of the coordination meeting between CEN/TC 12 “Materials, equipment and offshore struc

21、tures for petroleum and natural gas industries” and CEN/TC 234 “Gas supply” and modifies the CEN/TC 12 scope, to read: “Standardization of the materials, equipment and offshore structures used in drilling, production, refining and the transport by pipelines of petroleum and natural gas, excluding on

22、-land supply systems used by the gas supply industry and those aspects of offshore structures covered by IMO requirement (ISO/TC 8). The standardization is to be achieved wherever possible by the adoption of ISO Standards.” Resulting from Resolution BT 38/1995, “gas supply on land“ has been excluded

23、 from the scope of ISO 15590-2:2003 for the European adoption by CEN/TC 12. Equivalence with European Standards is provided in Annex ZA. B55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EN 14870-2:2004 (E) 4 Foreword The text of ISO 15590-2:2003 has been prepared by Technical Com

24、mittee ISO/TC 67 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“ of the International Organization for Standardization (ISO) and has been taken over as EN 14870-2:2004 by Technical Committee CEN/TC 12 “Materials, equipment and offshore structure

25、s for petroleum, petrochemical and natural gas industries”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards

26、 shall be withdrawn at the latest by June 2005. This document includes a Bibliography. International Standard ISO 15590-2 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC2, Pipeline tr

27、ansportation systems. EN 14870 consists of the following parts, under the general title Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems: Part 1: Induction bends (ISO 15590-1:2001 modified) Part 2: Fittings (ISO 15590-2:2003 modified) The

28、 following part is under preparation: Part 3: Flanges According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany

29、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. B55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EN 14870-2:2004 (E) 5 Introduction Users of

30、 this document should be aware that further or differing requirements may be needed for individual applications. This document is not intended to inhibit a manufacturer from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the individual application. This

31、 can be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the manufacturer should identify any variations from this document and provide details. B55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EN 14870-2:2004 (E) 6 1 Sc

32、ope This document specifies the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries as defined in EN 14161. This document is applicable to welding-end fittings suc

33、h as elbows, caps, tees, single or multiple extruded headers, reducers, and transition sections made from seamless and welded pipe of unalloyed or low-alloy steels. This document specifies three classes of fitting corresponding to increasing quality requirements in accordance with the technical deli

34、very conditions of ISO 3183 for pipe as indicated in Table 1. Table 1 Fitting class and corresponding pipe standard Fitting class Corresponding pipe standard Class A ISO 3183-1 Class B ISO 3183-2 Class C ISO 3183-3 This document is not applicable to the selection of the fitting class. This document

35、is not applicable to the materials for, or the attachment of, factory-welded extensions. On-land supply systems used by the gas supply industry are excluded from the scope of this document. 2 Normative references The following referenced documents are indispensable for the application of this docume

36、nt. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders Fusion welding Part 1: Steels. EN 14161, Petroleum and natural gas industries - Pipeline transpo

37、rtation systems (ISO 13623:2000 modified). EN ISO 377:1997, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997). EN ISO 2566-1, Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984). EN ISO 650

38、7-1, Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997). EN ISO 7438, Metallic materials - Bend test (ISO 7438:1985). EN ISO 15156-2:2003, Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production

39、- Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003). EN ISO 15614-1, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel a

40、lloys (ISO 15614-1:2004). ISO 148, Steel Charpy impact test (V-notch). ISO 148-2, Metallic materials Charpy pendum impact text Part 2:Verification of test machines. B55EB1B3E14C22109E918E8EA43EDB30F09CC9B7EF8DD9NormCD - Stand 2007-03 EN 14870-2:2004 (E) 7 ISO 148-3, Metallic materials Charpy pendum

41、impact test Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines. ISO 783, Metallic materials Tensile testing at elevated temperature. ISO 3183-1, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part

42、1: Pipes of requirement class A. ISO 3183-2, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part 2: Pipes of requirement class B. ISO 3183-3, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part 3: Pipes of requ

43、irement class C. ISO 3834-2, Quality requirements for welding Fusion welding of metallic materials Part 2: Comprehensive quality requirements. ISO 4885:1996, Ferrous products Heat treatments Vocabulary. ISO 6892, Metallic materials Tensile testing at ambient temperature. ISO/TR 7705:1991, Guidelines

44、 for specifying Charpy V-notch impact prescriptions in steel specifications. ISO 9712, Non-destructive testing Qualification and certification of personnel. ISO 10474, Steel and steel products Inspection documents. ISO 11496, Seamless and welded steel tubes for pressure purposes Ultrasonic testing o

45、f tube ends for the detection of laminar imperfections. ISO 12095, Seamless and welded steel tubes for pressure purposes Liquid penetrant testing. ISO 12096, Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections. ISO 13664, Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the d