DIN EN 14870-3-2006 Petroleum and natural gas industries - Induction bends fittings and flanges for pipeline transportation systems - Part 3 Flanges (ISO 15590-3 2004 modified) Eng.pdf

1、April 2006DEUTSCHE NORM Normenausschuss Erdl- und Erdgasgewinnung (NG) im DINPreisgruppe 12DIN Deutsches Institut fr Normung e.V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e.V., Berlin, gestattet.ICS 23.040.40; 75.200!,i+“9709208www.di

2、n.deDDIN EN 14870-3Erdl- und Erdgasindustrie Induktionsbgen, Zubehrteile und Flansche fr Fernleitungen Teil 3: Flansche (ISO 15590-3:2004 modifiziert);Englische Fassung EN 14870-3:2006Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part

3、3: Flanges (ISO 15590-3:2004 modified);English version EN 14870-3:2006Industries du ptrole et du gaz naturel Coudes dinduction, raccords et brides pour systmes de transport par conduites Partie 3: Brides (ISO 15590-3:2004 modifi);Version anglaise EN 14870-3:2006Alleinverkauf der Normen durch Beuth V

4、erlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 25 SeitenDIN EN 14870-3:2006-04 2 Nationales Vorwort Diese Europische Norm (EN 14870-3:2006) wurde vom Technischen Komitee CEN/TC 12 Materialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgas-industrie (Sekretariat: Frankr

5、eich) erstellt. Es handelt sich dabei um die bernahme der modifizierten Fassung von ISO 15590-3:2004, erarbeitet von ISO/TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subkomitee SC 2 Pipeline transportation systems. Durch den Ausschluss v

6、on Gasversorgungsleitungen an Land, fr die das CEN/TC 234 zustndig ist, kam nur eine modifizierte bernahme der ISO 15590-3:2004 in Frage und damit auch eine nderung der Norm-Nummer in EN 14870-3. Fr Deutschland war der Normenausschuss Erdl- und Erdgasgewinnung (NG), Arbeitsausschuss NG 2 Fernleitung

7、ssysteme an der Erarbeitung dieser Norm beteiligt. Diese Europische Norm enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 13/1983 nur die englische Originalfassung der EN-Norm. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14870-3 February 2006 ICS 23.040.60; 75.200 English Version Pe

8、troleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges (ISO 15590-3:2004 modified) Industries du ptrole et du gaz naturel Coudes dinduction, raccords et brides pour systmes de transport par conduites Partie 3 : Brides (ISO 15590-3

9、:2004 modifi) Erdl- und Erdgasindustrie Im Induktionsverfahren gefertigte Rohrbgen, Fittings und Flansche fr Rohrleitungs-Transportsysteme Teil 3: Flansche (ISO 15590-3:2004 modifiziert) This European Standard was approved by CEN on 5 January 2006. CEN members are bound to comply with the CEN/CENELE

10、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN

11、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN me

12、mbers are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

13、and and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E

14、N 14870-3:2006: EEN 14870-3:2006 (E) 2 Contents Page Explanatory note.3 Foreword4 Introduction .5 1 Scope 7 2 Normative references 7 3 Terms and definitions .8 4 Symbols and abbreviated terms . 10 5 Designation of flanges . 10 6 Pressure class and design 11 7 Information to be supplied by the purcha

15、ser 11 7.1 Principal information 11 7.2 Supplementary information . 12 8 Manufacturing . 12 8.1 Manufacturing procedure specification .12 8.2 Starting material 12 8.3 Hubs . 12 8.4 Heat treatment. 13 9 Testing and inspection. 13 9.1 General requirements. 13 9.2 Extent of testing and inspection . 13

16、9.3 Chemical composition . 14 9.4 Physical testing. 14 9.5 NDT. 18 9.6 Dimensions 20 9.7 Hydrostatic testing . 21 9.8 Weldability. 21 9.9 Repair welding 21 10 Documentation 21 10.1 Inspection document 21 10.2 Manufacturing record book . 21 11 Marking 21 Bibliography. 23 EN 14870-3:2006 (E) 3 Explana

17、tory note ISO 15590-3:2004, developed within ISO/TC 67 SC 2, has been taken over as a European Standard EN 14870-3 (ISO 15590-3:2004, modified). The scope of ISO/TC 67/SC 2 is pipeline transportation systems for the petroleum and natural gas industries without exclusions. However in CEN, the scopes

18、of CEN/TC 12 and CEN/TC 234 overlapped until 1995. This scope overlap caused problems for the parallel procedure for the above-mentioned items. The conflict in scope was resolved when both the CEN/Technical Committees and the CEN/BT took the following resolution: Resolution BT 38/1995: Subject: Revi

19、sed scope of CEN/TC 12 BT endorses the conclusions of the coordination meeting between CEN/TC 12 Materials, equipment and offshore structures for petroleum and natural gas industries and CEN/TC 234 Gas supply and modifies the CEN/TC 12 scope, to read: Standardization of the materials, equipment and

20、offshore structures used in drilling, production, refining and the transport by pipelines of petroleum and natural gas, excluding on-land supply systems used by the gas supply industry and those aspects of offshore structures covered by IMO requirement (ISO/TC 8). The standardization is to be achiev

21、ed wherever possible by the adoption of ISO Standards. Resulting from Resolution BT 38/1995, “gas supply on land“ has been excluded from the scope of ISO 15590-3:2004 for the European adoption by CEN/TC 12. EN 14870-3:2006 (E) 4 Foreword This European Standard (EN 14870-3:2006) has been prepared by

22、Technical Committee CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by end

23、orsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at the latest by August 2006. The text of ISO 15590-3 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Sub

24、committee SC 2, Pipeline transportation systems. With respect to ISO 15590-3 the scope of this European Standard excludes on-land supply systems used by the gas supply industry. Attention is drawn to the possibility that some of the elements of this European Standard may be the subject of patent rig

25、hts. ISO and CEN shall not be held responsible for identifying any or all such patent rights. EN 14870 consists of the following parts, under the general title Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems: Part 1: Induction bends (ISO

26、 15590-1:2001 modified) Part 2: Fittings (ISO 15590-2:2003 modified) Part 3: Flanges (ISO 15590-3:2004 modified) The ISO standards listed in Clause 2 “Normative references“ correspond to the following European Standards: ISO 377 Steel and steel products Location and preparation of samples and test p

27、ieces for mechanical testing EN ISO 377 ISO 2566-1 Steel Conversion of elongation values Part 1: Carbon and low alloy steels EN ISO 2566-1 ISO 6507-1 Metallic materials Vickers hardness test Part 1: Test method EN ISO 6507-1 ISO 13623 Petroleum and natural gas industries Pipeline transportation syst

28、ems EN 14161 (ISO 13623:2000, modified) ISO 15156-2:2003 Petroleum, petrochemical and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast iron EN ISO 15156-2:2003 EN 14870-3:2006

29、 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

30、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14870-3:2006 (E) 6 Introduction Users of this part of EN 14870 should be aware that further or differing requirements may be needed for individual

31、applications. This part of EN 14870 is not intended to inhibit a manufacturer from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the individual application. This can be particularly applicable where there is innovative or developing technology. Where a

32、n alternative is offered, the manufacturer should identify any variations from this part of EN 14870 and provide details. EN 14870-3:2006 (E) 7 1 Scope This part of EN 14870 applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orif

33、ice flanges. This part of EN 14870 specifies the technical requirements for carbon steel and low-alloy steel forged flanges for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623. This part of EN 14870 designates those categories of flanges th

34、at meet the industrys need to match ISO 3183 pipe. These flanges are for normal and low-temperature service and include supplementary requirements where required for sour service. Materials for, or the attachment of, factory-welded extensions, bolting materials, gaskets, slip-on flanges or flanged f

35、ittings are not covered by this part of EN 14870. This part of EN 14870 is not applicable to integrally cast or forged flanges for valves, pumps or other equipment. This part of EN 14870 does not cover the selection of the flange category or pressure class. Sizes and pressure classes listed in ISO 7

36、005-1 and applicable to this part of EN 14870 are as follows: DN 10 (NPS 1/2) to DN 1500 (NPS 60); PN 20 (class 150), PN 50 (class 300), PN 100 (class 600), PN 150 (class 900), PN 250 (class 1500), PN 420 (class 2500). On-land supply systems used by the gas supply industry are excluded from the scop

37、e of this document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14

38、8-1, Metallic material Charpy pendulum impact test Part 1: Test method ISO 377, Steel and steel products Location and preparation of samples and test pieces for mechanical testing ISO 783, Metallic materials Tensile testing at elevated temperature ISO 2566-1, Steel Conversion of elongation values Pa

39、rt 1: Carbon and low alloy steels ISO 3183-1, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part 1: Pipes of requirement class A ISO 3183-2, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part 2: Pipes of requ

40、irement class B ISO 3183-3, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part 3: Pipes of requirement class C ISO 4885, Ferrous products Heat treatments Vocabulary ISO 6507-1:1997, Metallic materials Vickers hardness test Part 1: Test method ISO 6892, M

41、etallic materials Tensile testing at ambient temperature EN 14870-3:2006 (E) 8 ISO 7005-1:1992, Metallic flanges Part 1: Steel flanges ISO/TR 7705:1991, Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications ISO 9327-1, Steel forgings and rolled or forged bars for pres

42、sure purposes Technical delivery conditions Part 1: General requirements ISO 9712, Non-destructive testing Qualification and certification of personnel ISO 10474:1991, Steel and steel products Inspection documents ISO 11496, Seamless and welded steel tubes for pressure purposes Ultrasonic testing of

43、 tube ends for the detection of laminar imperfections ISO 12095, Seamless and welded steel tubes for pressure purposes Liquid penetrant testing ISO 13623, Petroleum and natural gas industries Pipeline transportation systems ISO 13664, Seamless and welded steel tubes for pressure purposes Magnetic pa

44、rticle inspection of the tube ends for the detection of laminar imperfections ISO 13665, Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections ISO 15156-2:2003, Petroleum and natural gas industries Materials for

45、 use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons EN 14870-1:2004, Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends (ISO

46、 15590-1:2001 modified) EN 14870-2, Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings (ISO 15590-2:2003 modified) ASME Boiler and Pressure Vessel Code; Section VIII Division 1, Rules for Construction of Pressure Vessels AS

47、ME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 through 24 ASME B16.361), Orifice Flanges ASME B16.47, Large Diameter Steel Flange NPS 26 through NPS 60 ASME B31.3, Process piping ASTM A 370-03a1), Standard Test Methods and Definitions for Mechanical Testing of Steel Products ASTM E 112-96e3, St

48、andard Test Methods for Determining Average Grain Size MSS SP 442), 1996 Steel Pipeline Flanges 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 4885 and the following apply. 3.1 ANSI rating class numerical pressure design class defined in ASME B16.5

49、and used for reference purposes 1)American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428-2959, USA 2)Manufacturers Standardization Society of the Valve and Fittings Industry, 127 Park Street, N.E., Vienna, Virginia 22180, USA EN 14870-3:2006 (E) 9 NOTE The ANSI rating class is designated by the word Class followed by a number. ISO 14313:199913.2 by agreement