1、September 2012 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).
2、ICS 91.060.10; 91.140.30!$V“1915161www.din.deDDIN EN 14992Precast concrete products Wall elements;English version EN 14992:2007+A1:2012,English translation of DIN EN 14992:2012-09Betonfertigteile Wandelemente;Englische Fassung EN 14992:2007+A1:2012,Englische bersetzung von DIN EN 14992:2012-09Produi
3、ts prfabriqus en bton Elments de mur;Version anglaise EN 14992:2007+A1:2012,Traduction anglaise de DIN EN 14992:2012-09SupersedesDIN EN 14992:2007-07See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 40 pages 08.12
4、DIN EN 14992:2012-09 2 A comma is used as the decimal marker. Start of application The start of application of this standard is due to be 1 September 2012. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the
5、Bundesanzeiger (German Federal Gazette) and from the date given therein. National foreword This standard has been prepared by Technical Committee CEN/TC 229 “Precast concrete products” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Bauwe
6、sen (Building and Civil Engineering Standards Committee), Working Committee NA 005-07-08 AA Betonfertigteile (SpA zu CEN/TC 229). Amendments This standard differs from DIN EN 14992:2007-07 as follows: a) the scope has been extended to include fibre reinforced concrete; b) material requirements have
7、been adjusted to the modified scope; c) Annex Y “Choice of CE marking method” has been deleted; d) Annex ZA has been editorially revised and references to relevant clauses in this standard have been updated. Previous editions DIN EN 14992: 2007-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN
8、 14992:2007+A1 June 2012 ICS 91.060.10; 91.140.30 Supersedes EN 14992:2007English Version Precast concrete products - Wall elements Produits prfabriqus en bton - Elments de mur Betonfertigteile - Wandelemente This European Standard was approved by CEN on 17 February 2007 and includes Amendment 1 app
9、roved by CEN on 7 April 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
10、standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language a
11、nd notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L
12、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Bru
13、ssels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14992:2007+A1:2012: EEN 14992:2007+A1:2012 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004: Common rules for precast concrete products, at
14、 least for the first three digits. When a clause of EN 13369:2004 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword 3Introduction .51 Scope 62 Normative references 63 Terms and definitions .64 Requireme
15、nts 105 Test methods . 136 Evaluation of conformity 147 Marking 148 Technical documentation 14Annex A (informative) Additional design rules . 15Annex B (informative) Concreting of composite walls on site 18Annex C (informative) Inspection schemes . 20Annex ZA (informative) !Clauses of this European
16、Standard addressing the provisions of the EU Construction Products Directive“ . 22Bibliography . 38DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 3 Foreword This document (EN 14992:2007+A1:2012) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which
17、 is held by AFNOR and was examined by and agreed with a joint working party appointed by the Liaison Group CEN/TC 229-TC250, particularly for its compatibility with structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical te
18、xt or by endorsement, at the latest by December 2012, and conflicting national standards shall be withdrawn at the latest by December 2012. This document supersedes EN 14992:2007. This document includes Amendment 1 approved by CEN on 2012-04-07. The start and finish of text introduced or altered by
19、amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Products Directive(s) (89/106/EEC). For relationship with EU Directiv
20、e(s), see informative Annex ZA, which is an integral part of this document. This document is one of a series of product standards for precast concrete products. For common aspects reference is made to EN 13369: Common rules for precast concrete products, from which also the relevant requirements of
21、the EN 206-1: Concrete Part 1: Specification, performance, production and conformity are taken. The references to EN 13369:2004 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. Eurocodes are taken as a common reference for design
22、 aspects. !The installation of some structural precast concrete products is dealt with by EN 13670, Execution of concrete structures.“!deleted text“ The programme of standards for structural precast concrete products comprises the following standards, in some cases consisting of several parts: EN 11
23、68, Precast concrete products Hollow core slabs. EN 12794, Precast concrete products Foundation piles. EN 12843, Precast concrete products Masts and poles. EN 13224, Precast concrete products Ribbed floor elements. EN 13225, Precast concrete products Linear structural elements. EN 13693, Precast con
24、crete products Special roof elements. EN 13747, Precast concrete products Floor plates for floor systems. EN 13978, Precast concrete products Precast concrete garages. DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 4 EN 14843, Precast concrete products Stairs. EN 14844, Precast concrete products Box
25、 culverts. EN 14991, Precast concrete products Foundation elements. EN 14992, Precast concrete products Wall elements. !EN 15037“, Precast concrete products - Beam-and-block floor systems. EN 15050, Precast concrete products Bridge elements. !EN 15258“, Precast concrete products Retaining wall eleme
26、nts. This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1 and EN 1992-1-2). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are us
27、ed for mechanical strength, the conditions to affix CE marking to the product are described in ZA.3.4. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia
28、, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14992:2012-09 EN
29、 14992:2007+A1:2012 (E) 5 Introduction The evaluation of conformity given in this standard refers to the completed precast elements which are supplied to the market and covers all the production operations carried out in the factory. For design rules reference is made to EN 1992-1-1. Additional comp
30、lementary rules are provided where necessary. DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 6 1 Scope This European Standard applies to prefabricated walls, made of normal weight or lightweight concrete with dense structure. !Also fibre reinforced concrete (steel, polymer or other fibres covered by
31、 European Standards) may be used.“ !These wall elements“ may have external wall functions (see 3.11) or not, have facing functions (see 3.12) or not or have a combination of these functions. External wall functions could be: thermal insulation (see 3.11.1); sound insulation (see 3.11.2); hygrometric
32、 control (see 3.11.3); or a combination of these. They may be plain, reinforced or prestressed. They may be loadbearing or not. These include: solid walls; composite walls; sandwich walls; lightened walls; claddings. The wall element may also work as a column or beam. 2 Normative references The foll
33、owing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1992-1-1:2004, Eurocode 2: Design of concrete structur
34、es Part 1-1: General rules and rules for buildings EN 13369:2004, Common rules for precast concrete products EN ISO 12572, Hygrothermal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) 3 Terms and definitions For the purposes of th
35、is document, the terms and definitions given in EN 13369:2004 and the following apply. In general the term “product” refers to an element which is produced in large numbers. For general terms see Clause 3 of EN 13369:2004. DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 7 3.1 wall vertical or incline
36、d, plane or curved bidimensional unit 3.2 loadbearing wall structural wall element, which carries external loads or is important for the safety of people EXAMPLE Faade panels and parapets excluding small cladding panels) 3.3 non loadbearing wall wall which carries only its self weight and is not nec
37、essary for the building stability or important for the safety of people 3.4 solid wall precast wall of any shape produced as one solid unit including reinforcement and fixtures NOTE See Figure 1 3.5 composite wall composite wall consisting of two precast reinforced layers which are joined together w
38、ith a gap by means of a lattice girder system. NOTE 1 See Figure 2 NOTE 2 On site, the space between the layers is filled with concrete. Composite walls may also consist of a shell with lattice girders with the other side limited by an existing wall or another formwork during the erection 3.6 sandwi
39、ch wall consists of a base panel, a thermal insulation layer, a possible air space and a facing panel. NOTE 1 see Figure 3 NOTE 2 The layers may be connected stiffly or to allow relative in plane displacement between the layers 3.6.1 facing panel outermost layer of a sandwich wall element 3.6.2 base
40、 panel structural layer of a sandwich element!, which can be solid or lightened“ NOTE It transfers its own dead load and the load from the facing panel to the structure. It may also transfer load from other members 3.7 lightened wall wall produced in the precasting plant as a complete unit NOTE 1 se
41、e Figure 4 NOTE 2 It may consist of two external concrete layers and internal blocks of light weight materials (for example foam polystyrene, polyurethane) or hollow-core DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 8 3.8 cladding non loadbearing panel fixed to the structure by means of connecting
42、 systems NOTE 1 see Figure 5 NOTE 2 An insulating system may be inserted between this panel and the loadbearing structure 3.9 small cladding cladding element without reinforcement with a maximum size of 2,25 m2, a maximum length of 1,5 m and a thickness smaller than 80 mm 3.10 plain concrete element
43、 structural concrete elements having less reinforcement than the minimum reinforcement according to the relevant design code EXAMPLE EN 1992-1-1:2004, Clause 9.6 3.11 external wall functions 3.11.1 thermal insulation capacity to limit the transfer of thermal flow 3.11.2 sound insulation capacity to
44、reduce the transmission of sound 3.11.3 hygrometric control capacity to avoid the forming of condensate in the wall construction and particularly in the insulating materials which are frequently hygroscopic 3.12 facing function capacity to satisfy special dimensional requirements, esthetical surface
45、 requirements, esthetical shape requirements, or a combination of these Figure 1 Examples of solid walls DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 9 Key 1 in-situ concrete Figure 2 Examples of composite elements Figure 3 Examples of sandwich walls DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E)
46、10 Figure 4 Example of lightened walls Figure 5 Example of cladding elements 4 Requirements 4.1 Material requirements Subclause 4.1 of EN 13369:2004 shall apply. In addition subclause 10.9.4.1 of EN 1992-1-1:2004 shall apply. !Also fibre reinforced concrete (steel see EN 14889-1, polymer see EN 1488
47、9-2 or other fibres (see EN 15422) covered by European Standards) may be used, provided the fibres are not taken into account in structural calculation.“ DIN EN 14992:2012-09 EN 14992:2007+A1:2012 (E) 11 4.2 Production requirements Subclause 4.2 of EN 13369:2004 shall apply. 4.3 Finished product req
48、uirements 4.3.1 Geometrical properties 4.3.1.1 Production tolerances In addition to subclause 4.3.1.1 of EN 13369:2004 the tolerances indicated in Tables 1 and 2 (compare Figures J.1 to J.6 of EN 13369:2004) shall apply. If not otherwise stated class B applies to all elements. Table 1 Tolerance of positioning of openings and insert Class Permitted deviationA 10 mm B 15 mm For inserts designed to match with layer tolerances, different values of positi
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1