1、July 2011 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9
2、1.100.30!$sAu“1803082www.din.deDDIN EN 15037-3Precast concrete products Beam-and-block floor systems Part 3: Clay blocks (includes Amendment A1:2011)English translation of DIN EN 15037-3:2011-07Betonfertigteile Balkendecken mit Zwischenbauteilen Teil 3: Keramische Zwischenbauteile (enthlt nderung A1
3、:2011)Englische bersetzung von DIN EN 15037-3:2011-07Produits prfabriqus en bton Systmes de planchers poutrelles et entrevous Partie 3: Entrevous en terre cuite (Amendement A1:2011 inclus)Traduction anglaise de DIN EN 15037-3:2011-07Partially supersedesDIN 4159:1999-10,DIN 4159 DIN 4160:2000-04See s
4、tart of applicationwww.beuth.deDocument comprises 42 pagesIn case of doubt, the German-language original shall be considered authoritative.Corrigendum 1:2000-06 and06.11 DIN EN 15037-3:2011-07 2 A comma is used as the decimal marker. Start of application The start of application of this standard is
5、due to be 1 November 2011. DIN 4159:1999-10, DIN 4159 Corrigendum 1:2006-06 and DIN 4160:2000-4 may be used in parallel until 30 April 2012 (see deadline in the EU Official Journal). It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this stand
6、ard has been listed in the Bundesanzeiger (German Federal Gazette) and from the date given therein. National foreword This standard has been prepared by Technical Committee CEN/TC 229 “Precast concrete products” (Secretariat: AFNOR, France). The responsible German body involved in its preparation wa
7、s the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-06-14 AA Deckenziegel. This document includes EN 15037-3:2009 and Amendment A1:2011. However, due to a number of errors, the 2009 version of this standard was not published in Germany. These
8、 errors are now corrected by Amend-ment A1:2011 which includes further updates of Clauses 4, 5 and Annex ZA. Amendments This standard differs from DIN 4159:1999-10, DIN 4159 Corrigendum 1:2006-06 and DIN 4160:2000-4 as follows: a) clay blocks are now harmonized at the European level; b) conditions f
9、or CE marking have been established; c) Amendment 1:2011 has been incorporated; d) normative references relating to acoustics and resistance to fire have been updated; e) the subclauses relating to the test report and interpretation of test results have been revised. Previous editions DIN 4159: 1943
10、-05, 1962-02, 1972-10, 1978-04, 1999-10 DIN 4159 Corrigendum 1: 2000-06 DIN 4160: 1943x-05, 1962-02, 1978-08, 2000-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15037-3:2009+A1 February 2011 ICS 91.100.30 Supersedes EN 15037-3:2009English Version Precast concrete products - Beam-and-block
11、floor systems - Part 3: Clay blocks Produits prfabriqus en bton - Systmes de planchers poutrelles et entrevous - Partie 3: Entrevous en terre cuiteBetonfertigteile - Balkendecken mit Zwischenbauteilen - Teil 3: Keramische Zwischenbauteile This European Standard was approved by CEN on 25 January 2009
12、 and includes Amendment 1 approved by CEN on 10 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe
13、rences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE
14、N member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ic
15、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Aven
16、ue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15037-3:2009+A1:2011: EEN 15037-3:2009+A1:2011 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004 Common rules for pr
17、ecast concrete products, at least for the first three digits. When a clause of EN 13369:2004 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword 4Introduction .61 Scope 72 Normative references 73 Terms an
18、d definitions .84 Requirements 114.1 Material requirements 114.2 Production requirements . 114.3 Finished product requirements . 114.3.1 Geometrical properties 114.3.2 Surface characteristics 144.3.3 Mechanical resistance 154.3.4 Resistance and reaction to fire . 164.3.5 Acoustic properties 164.3.6
19、Thermal properties . 174.3.7 Durability . 174.3.8 Other requirements. 175 Test methods . 185.1 Measuring of dimensions and surface characteristics 185.1.1 Block dimensions . 185.1.2 Width and depth of the nib 195.1.3 Thickness of the top flange of resisting and semi-resisting blocks . 205.1.4 Percen
20、tage of voids of the top flange of resisting blocks . 205.1.5 Flatness of the underside 205.1.6 Straightness of the nib edges . 205.1.7 Surface characteristics 205.2 Mechanical strength . 205.2.1 Resistance to concentrated loads 205.2.2 Bending strength 225.2.3 Longitudinal compression test for resi
21、sting and semi-resisting clay blocks 245.2.4 Transverse testing of resisting and semi-resisting clay blocks 266 Evaluation of conformity 276.1 General . 276.2 Initial type tests . 286.3 Factory production control 286.3.1 General . 286.3.2 Finished product test . 287 Marking 288 Technical documentati
22、on 28Annex A (normative) Sampling for initial type testing and for independent testing of consignments 29A.1 General . 29A.2 Sampling procedure . 29DIN EN 15037-3:2011-07 EN 15037-3:2009+A1:2011 (E) 3 A.2.1 Random sampling . 29A.2.2 Representative sampling 29A.2.3 Dividing the sample . 30A.2.4 Numbe
23、r of blocks required per test . 30Annex B (normative) Inspection schemes for clay blocks . 31Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 33ZA.1 Scope and relevant characteristics . 33ZA.2 Procedure for attestation of
24、conformity of clay blocks for beam-and-block floor systems . 35ZA.2.1 System of attestation of conformity 35ZA.2.2 EC Certificate and Declaration of conformity . 35ZA.3 CE marking and labelling 36ZA.3.1 General . 36ZA.3.2 Simplified label 37ZA.3.3 Information to be provided with the CE marking . 38B
25、ibliography 40DIN EN 15037-3:2011-07 EN 15037-3:2009+A1:2011 (E) 4 Foreword This document (EN 15037-3:2009+A1:2011) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR. This document was examined by and agreed with a joint workin
26、g party appointed by the Liaison Group CEN/TC 229 CEN/TC 250, particularly for its compatibility with structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflic
27、ting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document
28、 includes Amendment 1, approved by CEN on 2011-01-10. This document supersedes EN 15037-3:2009. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the Europe
29、an Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. European standard for beam-and-block floor system is made of 5 parts: EN 15037-1, Precast concrete products
30、Beam-and-block floor systems Part 1: Beams; EN 15037-2, Precast concrete products Beam-and-block floor systems Part 2: Concrete blocks; EN 15037-3, Precast concrete products Beam-and-block floor systems Part 3: Clay blocks; !EN 15037-4“, Precast concrete products Beam-and-block floor systems Part 4:
31、 Polystyrene blocks; prEN 15037-5, Precast concrete products Beam-and-block floor systems Part 5: Lightweight blocks. This European Standard is one of a series of product standards for precast concrete products. For common aspects of concrete products, reference is made to EN 13369, from which also
32、the relevant requirements of the EN 206-1 are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. !Eurocodes are taken as a common reference for design aspects. The installation of some structural p
33、recast concrete products is dealt with by EN 13670:2009 Execution of concrete structures. In all countries it can be accompanied by alternatives for national application.“ The program of standards for structural precast concrete products comprises the following standards, in some cases consisting on
34、 several parts: DIN EN 15037-3:2011-07 EN 15037-3:2009+A1:2011 (E) 5 EN 1168, Precast concrete products Hollow core slabs EN 12794, Precast concrete products Foundation piles EN 12843, Precast concrete products Masts and poles EN 13224, Precast concrete products Ribbed floor elements EN 13225, Preca
35、st concrete products Linear structural elements EN 13693, Precast concrete products Special roof elements EN 13747, Precast concrete products Floor plates for floor systems EN 13978, Precast concrete products Precast concrete garages EN 14843, Precast concrete products Stairs EN 14844, Precast concr
36、ete products Box culverts EN 14991, Precast concrete products Foundation elements EN 14992, Precast concrete products Wall elements EN 15037-1, Precast concrete products Beam-and-block floor systems Part 1: Beams EN 15050, Precast concrete products Bridge elements EN 15258, Precast concrete products
37、 Retaining wall elements This European Standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1:2004 and EN 1992-1-2:2004). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design pr
38、ovisions other than EN Eurocodes are used for mechanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
39、 this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer
40、land and United Kingdom. DIN EN 15037-3:2011-07 EN 15037-3:2009+A1:2011 (E) 6 Introduction The evaluation of conformity refers to the clay blocks which are supplied to the market and covers all the production operations carried out in the factory. For design rules, reference is made to EN 1992-1-1:2
41、004. Additional complementary rules are provided where necessary. DIN EN 15037-3:2011-07 EN 15037-3:2009+A1:2011 (E) 7 1 Scope This European Standard deals with the requirements and the basic performance criteria for blocks made in clay, used in conjunction with precast concrete beams in compliance
42、with EN 15037-1, with or without cast-in-situ concrete for the construction of beam-and-block floor and roof systems. Examples of typology of floor and roof systems are given in Annex B of EN 15037-1:2008. 2 Normative references The following referenced documents are indispensable for the applicatio
43、n of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 771-1:2003, Specification for masonry units Part 1: Clay masonry units EN 772-3, Methods of test for masonry units Pa
44、rt 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing EN 772-9, Methods of test for masonry units Part 9: Determination of volume and percentage of voids and net volume of clay calcium silicate masonry units by sand filling EN 772-13, Methods of test
45、 for masonry units Part 13: Determination of net and gross dry density of masonry units (except for natural stone) EN 772-19, Methods of test for masonry units Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units EN 1745, Masonry and masonry products Metho
46、ds for determining design thermal values EN 12390-4:2000, Testing hardened concrete Part 4: Compressive strength Specification for testing machines EN 13369:2004, Common rules for precast concrete products !EN 13501-1“, Fire classification of construction products and building elements Part 1: Class
47、ification using data from reaction to fire tests EN 15037-1:2008, Precast concrete products Beam-and-block floor systems Part 1: Beams !deleted text“ EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO 717
48、-2, Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 717-2:1996) !EN ISO 10140-3, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)“ !EN ISO 10140-5, Acoustics Laboratory measureme
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1