DIN EN 15039-2014 Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts German version EN 15039 2014《人类.pdf

1、July 2014 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 7

2、1.100.80!%7W“2205256www.din.deDDIN EN 15039Chemicals used for treatment of water intended for humanconsumption Antiscalants for membranes Polycarboxilic acids and salts;English version EN 15039:2014,English translation of DIN EN 15039:2014-07Produkte zur Aufbereitung von Wasser fr den menschlichen G

3、ebrauch Antiscalants fr Membranen Polycarbonsuren und deren Salze;Englische Fassung EN 15039:2014,Englische bersetzung von DIN EN 15039:2014-07Produits chimiques pour le traitement de leau destine la consommation humaine Produits antitartre pour membranes Acides polycarboxyliques et sels;Version ang

4、laise EN 15039:2014,Traduction anglaise de DIN EN 15039:2014-07SupersedesDIN EN 15039:2006-09www.beuth.deDocument comprises 29 pagesIn case of doubt, the German-language original shall be considered authoritative.06.14 DIN EN 15039:2014-07 2 A comma is used as the decimal marker. National foreword T

5、his document (EN 15039:2014) has been prepared by Technical Committee CEN/TC 164 “Water supply” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (Water Practice Standards Committee), Working Committee NA 119-04-02 AA Wasseraufb

6、ereitung. Users of this standard are advised of the reservations stated in the Introduction of the European Standard and should note that national regulations exist in Germany dealing with water for human consumption, in particular the Trinkwasserverordnung (TrinkwV 2001) (German Drinking Water Ordi

7、nance). The DIN Standards corresponding to the International Standards referred to in this document are as follows, whereby EN ISO Standards are only listed below if these have not been published as DIN EN ISO Standards with the same number: EN ISO 3696 DIN ISO 3696 ISO 6703-1 DIN 38405-13 ISO 9174

8、DIN EN 1233 Amendments This standard differs from DIN EN 15039:2006-09 as follows: a) additional monomers have been included; b) specifications concerning hazard and safety related symbols have been brought in line with the “Globally Harmonized System of Classification, Labelling and Packaging of Ch

9、emicals (GHS)” (Global harmonisiertes System zur Einstufung und Kennzeichnung von Chemikalien); c) normative references have been updated. Previous editions DIN EN 15039: 2006-09 DIN EN 15039:2014-07 3 National Annex NA (informative) Bibliography DIN 38405-13, German standard methods for the examina

10、tion of water, waste water and sludge Anions (group D) Determination of cyanides (D 13) DIN EN 1233, Water quality Determination of chromium Atomic absorption spectrometric methods DIN ISO 3696, Water for analytical laboratory use Specification and test methods Verordnung ber die Qualitt von Wasser

11、fr den menschlichen Gebrauch (Trinkwasserverordnung TrinkwV 2001) (German Drinking Water Ordinance), as of 02 August 2013 (BGBI. (German Federal Law Gazette) I, 2013, no. 46, p. 2977-3004), as amended by Article 4, Paragraph 22 of the Act of 07 August 2013 (BGBI. I, no. 48, p. 3154-3211)*)*)Obtainab

12、le from: Bundesministerium der Justiz (German Federal Ministry of Justice) (Internet: http:/www.gesetze-im-internet.de). DIN EN 15039:2014-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15039 March 2014 ICS 71.100.80 Supersedes EN 15039:2006English Version

13、 Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts Produits chimiques pour le traitement de leau destine la consommation humaine - Produits antitartre pour membranes - Acides polycarboxyliques et sels Produkte zur Aufbe

14、reitung von Wasser fr den menschlichen Gebrauch - Antiscalants fr Membranen - Polycarbonsuren und deren Salze This European Standard was approved by CEN on 5 January 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

15、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (

16、English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgi

17、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

18、land, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national

19、Members. Ref. No. EN 15039:2014 EEN 15039:2014 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5 3 Description . 5 3.1 Identification . 5 3.2 Commercial forms . 8 3.3 Physical properties 8 3.4 Chemical properties 9 4 Purity criteria 9 4.1 General 9 4.2 Composition of

20、 commercial product . 9 4.3 Impurities and main by-products . 9 4.4 Chemical parameters 9 5 Test methods 10 5.1 Sampling . 10 5.2 Analyses . 11 6 Labelling - Transportation - Storage 15 6.1 Means of delivery . 15 6.2 Risk and safety labelling according to the EU legislation . 15 6.3 Transportation r

21、egulations and labelling 15 6.4 Marking . 15 6.5 Storage 15 Annex A (informative) General information on polycarboxylic acids and salts . 17 A.1 Origin 17 A.2 Use 17 A.3 General rules relating to safety 18 Annex B (normative) Analytical methods for polycarboxylic acids and salts 19 B.1 Determination

22、 of dry solid 19 B.2 Determination of acrylic acid 20 B.3 Assessment of product quality 23 Annex C (informative) Environmental, health and safety precautions within chemical laboratory 24 Bibliography 25 DIN EN 15039:2014-07 EN 15039:2014 (E) 3 Foreword This document (EN 15039:2014) has been prepare

23、d by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2014 and conflicting national standards sha

24、ll be withdrawn at the latest by September 2014. This document supersedes EN 15039:2006. Significant technical differences between this edition and EN 15039:2006 are as follows: replacement of warning and safety precautions notes by labelling according to REGULATION (EC) No 1272/2008. According to t

25、he CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

26、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15039:2014-07 EN 15039:2014 (E) 4 Introduction In respect of potential adverse effects on the

27、quality of water intended for human consumption, caused by the products covered by this European Standard: a) this European Standard provides no information as to whether the products may be used without restriction in any of the Member States of the EU or EFTA; b) it should be noted that, while awa

28、iting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of these products remain in force. NOTE Conformity with this European Standard does not confer or imply acceptance or approval of the products in any of the Member States o

29、f the EU or EFTA. The use of the products covered by this European Standard is subject to regulation or control by National Authorities. DIN EN 15039:2014-07 EN 15039:2014 (E) 5 1 Scope This European Standard is applicable to polycarboxylic acids and salts used as antiscalants for membranes for the

30、treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding analytical methods for polycarboxylic acids and salts. It gives information on their use as antiscalants for membranes in water treatment. 2 Normative references T

31、he following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 3

32、696, Water for analytical laboratory use - Specification and test methods (ISO 3696) EN ISO 5961, Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961) EN ISO 11885, Water quality - Determination of selected elements by inductively coupled plasma optical emission spec

33、trometry (ICP-OES) (ISO 11885) EN ISO 11969, Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969) EN ISO 12846, Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 1

34、2846) ISO 3165, Sampling of chemical products for industrial use Safety in sampling ISO 6206, Chemical products for industrial use Sampling Vocabulary ISO 6703-1, Water quality Determination of cyanide Part 1: Determination of total cyanide ISO 8213, Chemical products for industrial use Sampling tec

35、hniques Solid chemical products in the form of particles varying from powders to coarse lumps ISO 8288:1986, Water quality Determination of cobalt, nickel, copper, zinc, cadmium and lead Flame atomic absorption spectrometric methods ISO 9174, Water quality Determination of chromium Atomic absorption

36、 spectrometric methods ISO 9965, Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique) 3 Description 3.1 Identification 3.1.1 Chemical name Homopolymers: a) polyacrylic acid; b) polymethacrylic acid; DIN EN 15039:2014-07 EN 15039:2014 (E) 6 c) polymaleic

37、acid; d) polyaspartic acid. These acids can also be used as sodium, potassium, and ammonium salts. Copolymers of acrylic acid, methacrylic acid, maleic acid, vinylsulfonic acid, allyl sulfonic acid, methylallyl sulfonic acid, 2-acrylamido-2-methyl-1-propanesulfonic acid, vinyl phosphonic acid, 2-met

38、hoxyethylphosphonic acid, ethyleneoxide, -olefines, acrylamide, benzene sulfonic acid, 4-(2-methyl-2-propenyl)oxy-, sodium salt, benzene sulfonic acid, 4-vinyl-, sodium salt and 1-propanesulfonic acid, 2-hydroxy-3-(2-propenyloxy)-, monosodium salt. Polymers of polyetherdiamines and phosphorous acid.

39、 The acid monomers can also be used as sodium, potassium, and ammonium salts. 3.1.2 Synonym or common names Nil. 3.1.3 Relative molecular mass 18 M/cm) B.2.2.3 Acrylic acid monomer (min. mass fraction 99 %) B.2.2.4 Sulfuric acid, mass fraction 96 %, density = 1,84 g/ml B.2.2.5 Phosphoric acid, mass

40、fraction 88 %, density = 1,75 g/ml B.2.2.6 Helium gas, high purity B.2.2.7 Eluent Dissolve 26,04 g of sulfuric acid (B.2.2.4) with 250 ml of water (B.2.2.2). Mix 3,33 ml of this diluted sulfuric acid with 1 000 ml of water. Degas by use of an ultrasonic bath or by passing helium through the solution

41、. B.2.2.8 Acrylic acid stock solution (200 mg/l) Weigh, to the nearest 0,001 g, 20 mg of acrylic acid (B.2.2.3.) and dissolve with water into a 200 ml one-mark volumetric flask. Make up to the mark with water (B.2.2.2) and mix. B.2.3 Apparatus Ordinary laboratory apparatus and glassware together wit

42、h the following: B.2.3.1 For extraction B.2.3.1.1 Balance, with an accuracy of 0,1 mg B.2.3.1.2 Laboratory stirrer B.2.3.1.3 Measuring cylinders B.2.3.1.4 Syringes, 2 ml capacity B.2.3.1.5 Disposable syringe filters, 25 mm diameter, fitted with cellulose/mixture ester-membrane, pore size 0,45 m. B.2

43、.3.2 For analyses B.2.3.2.1 High-performance liquid chromatograph fitted with a constant flow solvent delivery system, a HPLC pump, a sample injection valve, a variable wavelength ultraviolet spectrometric detector, a computer/integrator with software (PC with HP ChemStation). Use a column of 300 mm

44、 length and 7,8 mm internal diameter with packaging for example (Knauer Eurokat-H 10 m).7)B.2.3.2.2 Volumetric flasks B.2.3.2.3 Microlitre syringe B.2.4 Procedure B.2.4.1 Preparation of test solution Weigh, to the nearest 0,001 g, 0,5 g of the sample in a 100 ml volumetric flask. Dissolve the test s

45、ample with 50 ml of ultrapure water (B.2.2.2) and acidify with two droplets of phosphoric acid (B.2.2.5). Make up to the mark with 7)Knauer Eurokat-H 10 m is the trade name of a product supplied by Knauer. This information is given for the convenience of users of this document and does not constitut

46、e an endorsement by CEN of the product named. Equivalent products may be used if they can be shown to lead to the same results. DIN EN 15039:2014-07 EN 15039:2014 (E) 22 water and mix. Take 2 ml of the well mixed test solution with a syringe and filter through a syringe filter (B.2.3.1.5). The filtr

47、ate is ready for the HPLC analysis. The procedure assumes that the detector response is a linear function of concentration but linearity shall first be established by the operator by means of a calibration graph. B.2.4.2 Chromatographic conditions Detection limit : 0,017 mg/kg Quantification limit :

48、 0,054 mg/kg Lowest concentration: 0,019 mg/kg of acrylic acid Highest concentration: 12,59 mg/kg of acrylic acid. In accordance with these chromatographic conditions Table B.1 gives the data obtained. Table B.1 Values of peak areas in relation to acrylic acid content Concentration mg/kg Peak area 0,019 7,619 0,044 15,291 0,052 17,882 0,080 26,404 0,086 27,564 0,112 36,056 0,133 43,260 0,248 76,922 0,499 153,117 1,17 370,807 2,51 800,973 5,02 1602,093 7,65 2430,687 10,19 3258,458