DIN EN 15101-1-2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1 Specification for the products before installation Germ.pdf

1、December 2013 Translation by DIN-Sprachendienst.English price group 23No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 91.100.60!%*zp“2078777www.din.deDDIN EN 15101-1Thermal insulation products for buildings In-situ formed loose fill cellulose (LFCI) products Part 1: Specification for the products before installation;English version EN 15101-1:2013,English translation of DIN EN 15101-1:2013-12Wrmedmmstoffe fr Geb

3、ude An der Verwendungsstelle hergestellter Wrmedmmstoff aus Zellulosefllstoff (LFCI) Teil 1: Spezifikation fr die Produkte vor dem Einbau;Englische Fassung EN 15101-1:2013,Englische bersetzung von DIN EN 15101-1:2013-12Produits isolants thermiques destins aux applications du btiment Isolation thermi

4、que forme en place base de cellulose (LFCI) Partie 1: Spcification des produits en vrac avant la mise en oeuvre;Version anglaise EN 15101-1:2013,Traduction anglaise de DIN EN 15101-1:2013-12www.beuth.deDocument comprises 66 pagesIn case of doubt, the German-language original shall be considered auth

5、oritative.11.13 DIN EN 15101-1:2013-12 2 A comma is used as the decimal marker. National foreword This document (EN 15101-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany) The responsible German body involved in its pre

6、paration was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-60 AA Wrmedmmstoffe. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15101-1 September 2013 ICS 91.100.60 English Version Thermal insulation products for buildings - In-si

7、tu formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation Produits isolants thermiques destins aux applications du btiment - Isolation thermique forme en place base de cellulose (LFCI) - Partie 1 : Spcification des produits en vrac avant la mise en o

8、euvre Wrmedmmstoffe fr Gebude - An der Verwendungsstelle hergestellter Wrmedammstoff aus Zellulosefllstoff (LFCI) - Teil 1: Spezifikation fr die Produkte vor dem Einbau This European Standard was approved by CEN on 8 August 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulati

9、ons which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

10、This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN m

11、embers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por

12、tugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any

13、form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15101-1:2013: EEN 15101-1:2013 (E) 2 Contents Page Foreword . 5 1 Scope 6 2 Normative references . 6 3 Terms, definitions, symbols and abbreviations 7 3.1 Terms and definitions 7 3.2 Symbols 8 3.3 Abbreviations . 9 4 Requ

14、irements . 9 4.1 General . 9 4.2 For all applications . 9 4.2.1 Thermal resistance and thermal conductivity 9 4.2.2 Settlement 10 4.2.3 Reaction to fire . 10 4.2.4 Durability 10 4.3 For specific applications 11 4.3.1 General . 11 4.3.2 Short-term water absorption 11 4.3.3 Water vapour diffusion resi

15、stance factor 11 4.3.4 Dangerous substances 11 4.3.5 Corrosion resistance of the insulation material on certain metals 11 4.3.6 Mould fungi resistance 11 4.3.7 Airflow resistivity . 12 4.3.8 Continuous Glowing Combustion . 12 4.3.9 Sound absorption. 12 4.3.10 Reaction to fire of product in standardi

16、sed assemblies simulating end-use applications . 12 5 Test methods 13 5.1 Sampling . 13 5.2 Conditioning . 13 5.3 Testing 13 5.3.1 General . 13 5.3.2 Thermal resistance and thermal conductivity 15 6 Designation code . 15 7 Evaluation of conformity 16 7.1 General . 16 7.2 Initial type testing . 16 7.

17、3 Factory production control 16 8 Marking and labelling . 16 Annex A (normative) Determination of declared thermal resistance and thermal conductivity 17 A.1 General . 17 A.2 Input data 17 A.3 Declared values of thermal resistance and thermal conductivity 17 Annex B (normative) Laboratory methods fo

18、r the determination of settlement 19 B.1 Blown LFCI for ventilated attics (open blow) determination of settlement under cyclic humidity 19 B.1.1 Principle 19 B.1.2 Apparatus . 19 B.1.3 Test specimens 19 B.1.4 Test procedure . 19 DIN EN 15101-1:2013-12 EN 15101-1:2013 (E) 3 B.1.5 Test report 21 B.2 B

19、lown LFCI in timber and steel framed walls determination of settlement under vibrations 21 B.2.1 Principle 21 B.2.2 Apparatus . 21 B.2.3 Test specimen 23 B.2.4 Procedure . 23 B.2.5 Calculation and expression of test results 24 B.2.6 Accuracy of measurements . 24 B.2.7 Test report 24 B.3 Blown LFCI f

20、or ventilated attics determination of settlement under impact excitation and under increased temperature and moisture (informative and for FPC only) 25 B.3.1 Principle 25 B.3.2 Apparatus . 25 B.3.3 Test specimens 26 B.3.4 Test procedure . 27 B.3.5 Calculations and expression of results . 27 B.3.6 Te

21、st report 28 Annex C (normative) Testing for reaction to fire of products . 30 C.1 Scope 30 C.1.1 General . 30 C.1.2 Product and installation parameters . 30 C.1.3 Ignitability (EN ISO 11925-2) 31 C.1.4 Single Burning Item SBI (EN 13823) for loose-fill cellulose insulation products 32 Annex D (norma

22、tive) Specimen preparation method for the water absorption test . 36 D.1 Principle 36 D.2 Conditioning . 36 D.3 Procedure . 36 Annex E (normative) Method of test for corrosion resistance 37 E.1 Principle 37 E.2 Conditioning . 37 E.3 Reagents and materials . 37 E.4 Apparatus . 37 E.5 Procedure . 38 E

23、.6 Classification of the results . 38 E.7 Report . 38 Annex F (normative) Method for determining mould fungi resistance . 39 F.1 Scope 39 F.2 Significance and use 39 F.3 Apparatus . 39 F.4 Reagents and materials . 39 F.4.1 Water . 39 F.4.2 Inoculum . 40 F.5 Specimens 40 F.5.1 Viability control speci

24、mens . 40 F.5.2 Comparative material . 40 F.5.3 Test specimens 40 F.6 Procedure . 40 F.6.1 Spore suspension 40 F.6.2 Inoculation of test specimens, comparative material and control specimens 41 F.6.3 Incubation . 41 F.7 Test analysis . 41 F.7.1 General . 41 F.7.2 Validation 42 F.7.3 Classification 4

25、2 F.8 Report . 42 F.9 Precision and bias 42 DIN EN 15101-1:2013-12 EN 15101-1:2013 (E) 4 Annex G (normative) Specimen preparation method for the airflow resistance test . 43 G.1 Principle 43 G.2 Procedure . 43 Annex H (normative) Specimen preparation method for thermal resistance and thermal conduct

26、ivity test . 44 H.1 Principle 44 H.2 Procedure . 44 H.2.1 Horizontal applications, loft and floors . 44 H.2.2 Cavity insulation, frame constructions and cavity walls 45 Annex I (normative) Factory production control . 47 Annex J (normative) Testing for reaction to fire of products in standardised as

27、semblies simulating end-use application(s) . 50 J.1 Scope 50 J.2 Product and installation parameters . 50 J.3 Mounting and fixing . 51 J.3.1 Ignitability (EN ISO 11925-2) 51 J.3.2 Single Burning Item SBI (EN 13823) 51 J.4 Field of application . 54 Annex K (normative) An example of a performance char

28、t 56 Annex ZA (informative) Clause of this European Standard addressing the provisions of the EU Construction Products Directive . 57 ZA.1 Scope and relevant characteristics . 57 ZA.2 Procedure for attestation of conformity of in situ formed loose-fill cellulose . 59 ZA.2.1 System(s) of attestation

29、of conformity 59 ZA.2.2 EC Certificate and Declaration of conformity . 61 ZA.3 CE marking and labelling . 62 Bibliography 64 DIN EN 15101-1:2013-12 EN 15101-1:2013 (E) 5 Foreword This document (EN 15101-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and prod

30、ucts”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Atten

31、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and

32、 the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of two parts which form a package. The first part is the harmonis

33、ed part satisfying the mandate and the CPD and is the basis for the CE marking covering the products, which are placed on the market. The second part, which is the non-harmonised part, covers the installation checks for the installed products. This European Standard is one of a series for mineral wo

34、ol, expanded clay, expanded perlite, exfoliated vermiculite, polyurethane/polyisocyanurate, cellulose, bound expanded polystyrene and expanded polystyrene in-situ formed insulation products used in buildings, but this standard may be used in other areas where appropriate. The reduction in energy use

35、d and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to im

36、plement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roman

37、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15101-1:2013-12 EN 15101-1:2013 (E) 6 1 Scope This European Standard specifies requirements for loose-fill cellulose insulation (LFCI) products for the thermal and/or sound insulation of buildings when installe

38、d into walls, floors, galleries, roofs and ceilings. This European Standard is a specification for the loose-fill cellulose insulation (LFCI) products before installation. This European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the

39、rules for evaluation of conformity. Products covered by this European Standard may also be used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. Products with a declared thermal conductivity at 10 C g

40、reater than 0,060 W/(m K) or a declared thermal resistance lower than 0,25 m2 K/W are not covered by this European Standard. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The re

41、quired levels are to be found in local regulations or non-conflicting standards. This European Standard does not cover factory made cellulose products placed on the market as bats, mats or boards intended to be used for the insulation of buildings or loose-fill cellulose products for the insulation

42、of building equipment and industrial installations. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edi

43、tion of the referenced document (including any amendments) applies. EN 312, Particleboards - Specifications EN 508-1, Roofing products from metal sheet Specification for self-supporting products of steel, aluminium or stainless steel sheet Part 1: Steel EN 520, Gypsum plasterboards Definitions, requ

44、irements and test methods EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12086:2013, Thermal insulation products for building applications Determination of water vapour transmission properties EN 12667, Thermal perf

45、ormance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 13172:2012, Thermal insulating products Evaluation of conformity EN 13238, Reaction to fire tests for building pr

46、oducts Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements Part 1 Classification using data from reaction to fire tests EN 13823:2010, Reaction to fire tests for building products Building products exclu

47、ding floorings exposed to the thermal attack by a single burning item DIN EN 15101-1:2013-12 EN 15101-1:2013 (E) 7 EN 29053, Acoustics Materials for acoustical applications Determination of airflow resistance (ISO 9053) EN ISO 354:2003, Acoustics Measurement of sound absorption in a reverberation ro

48、om (ISO 354:2003) EN ISO 10456 Building materials and products Hygrothermal properties Tabulated design values and procedures for determining declared and design thermal values (ISO 10456) EN ISO 11654, Acoustics Sound absorbers for use in buildings Rating of sound absorption (ISO 11654) EN ISO 11925-2, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) ISO 12491, Statistical metho