DIN EN 15101-2-2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2 Specification for the installed products German version.pdf

1、December 2013 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 91.100.60!%*zo“2078776www.din.deDDIN EN 15101-2Thermal insulation products for buildings In-situ formed loose fill cellulose (LFCI) products Part 2: Specification for the installed products;English version EN 15101-2:2013,English translation of DIN EN 15101-2:2013-12Wrmedmmstoffe fr Gebude An der

3、 Verwendungsstelle hergestellter Wrmedmmstoff aus Zellulosefllstoff (LFCI) Teil 2: Spezifikation fr die eingebauten Produkte;Englische Fassung EN 15101-2:2013,Englische bersetzung von DIN EN 15101-2:2013-12Produits isolants thermiques destins aux applications du btiment Isolation thermique forme en

4、place base de cellulose (LFCI) Partie 2: Spcifications des produits mis en oeuvre;Version anglaise EN 15101-2:2013,Traduction anglaise de DIN EN 15101-2:2013-12www.beuth.deDocument comprises 24 pagesIn case of doubt, the German-language original shall be considered authoritative.11.13 DIN EN 15101-2

5、:2013-12 2 A comma is used as the decimal marker. National foreword This document (EN 15101-2:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany) The responsible German body involved in its preparation was the Normenausschu

6、ss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-60 AA Wrmedmmstoffe. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15101-2 September 2013 ICS 91.100.60 English Version Thermal insulation products for buildings - In-situ formed loose fill cellulose

7、 (LFCI) products - Part 2: Specification for the installed products Produits isolants thermiques destins aux applications du btiment - Isolation thermique forme en place base de cellulose (LFCI) - Partie 2: Spcifications des produits mis en oeuvre Wrmedmmstoffe fr Gebude - An der Verwendungsstelle h

8、ergestellter Wrmedmmstoff aus Zellulosefllstoff (LFCI) - Teil 2: Spezifikation fr die eingebauten Produkte This European Standard was approved by CEN on 8 August 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European St

9、andard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Engl

10、ish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,

11、Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

12、, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No

13、. EN 15101-2:2013: EEN 15101-2:2013 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviations .5 3.1 Terms and definitions .5 3.2 Symbols and abbreviations 6 3.2.1 Symbols used in this standard: .6 3.2.2 Abbreviations used in this standard6 4 R

14、equirements .7 4.1 General 7 4.2 Declared installed insulation thickness and declared installed insulation density for open blow applications (e.g. lofts) 7 4.3 Declared installed insulation thickness and declared installed insulation density for cavity applications (e.g. frame wall, roof and floor

15、constructions) 7 5 Test methods 7 5.1 General 7 5.2 Declared installed insulation thickness 8 5.3 Declared installed insulation density 8 5.4 Frame method for the determination of declared installed density .8 5.5 Declared installed declared insulation density of cavity applications .8 5.5.1 Average

16、 cavity width .8 5.5.2 Machine output 8 5.5.3 Declared installed insulation density 8 6 Guidelines for installation .9 7 Installers declaration 9 Annex A (normative) Open blow applications (lofts) Determination of installed insulation thickness Pin and plate method . 10 A.1 Apparatus 10 A.2 Procedur

17、e 10 Annex B (normative) Cavity applications Calculation for determining the declared installed insulation density in a construction . 12 B.1 Procedure 12 B.2 Calculation . 12 Annex C (normative) Cavity applications Determination of average cavity width . 13 C.1 Procedure 13 C.2 Calculation . 13 C.3

18、 Floors . 13 Annex D (normative) Cavity applications Test box density (method of checking the blown density before installation into the wall) 14 D.1 Apparatus 14 D.2 Procedure 14 D.3 Calculation . 14 Annex E (informative) Example for installation guidelines 15 E.1 Lofts . 15 E.1.1 Control tests mad

19、e by the installer when preparing the product on site . 15 E.1.2 Installation procedure 15 E.1.3 Installers declaration . 16 DIN EN 15101-2:2013-12 EN 15101-2:2013 (E) 3 E.2 Walls . 17 E.2.1 Suitability of the building to receive the insulation . 17 E.2.2 An example of a declaration form for use by

20、the installer 18 E.3 Frame constructions . 18 E.3.1 Suitability of the building to receive the insulation . 18 E.3.2 An example of a declaration form for use by the installer 19 E.4 Floors 19 E.4.1 Suitability of the structure to receive the insulation . 19 E.4.2 An example of a declaration form for

21、 use by the installer 21 Bibliography 22 DIN EN 15101-2:2013-12 EN 15101-2:2013 (E) 4 Foreword This document (EN 15101-2:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be give

22、n the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elements of this document may be t

23、he subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard consists of two parts which form a package. The first part, which is the harmonised part, satisfying the mandate and the Construction Products Directive

24、 (CPD) and is the basis for the CE marking, covers the products which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installation checks for the installed products. Part 1 has been prepared under a mandate given to CEN by the European Co

25、mmission and the European Free Trade Association, and supports the essential requirements of EU Directives. Attention is drawn to the need to take into account any complementary member state rules (e.g. installation rules) which together with this European Standard ensures the fitness for purpose of

26、 the installed product. This European Standard is one of a series of standards that include mineral wool, expanded clay, expanded perlite, exfoliated vermiculite, polyurethane/polyisocyanurate, cellulose and bound expanded polystyrene in-situ formed insulation products used in buildings, but this st

27、andard may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations,

28、 the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La

29、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15101-2:2013-12 EN 15101-2:2013 (E) 5 1 Scope This European Standard specifies requirements for in-situ formed loose-fill cellulos

30、e insulation (LFCI) products when installed as thermal insulation into walls, floors, galleries, roofs, lofts and ceilings. This Part 2 is a specification for the installation checks for the installed products.It specifies the checks and tests to be used for the declarations made by the installer of

31、 the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. Products with a declared thermal con

32、ductivity at 10 C (mean temperature) greater than 0,060 W/(m K) or a declared thermal resistance lower than 0,25 m2 K/W are not covered by this European Standard. This European Standard does not cover factory made cellulose mats, bats or quilts intended to be used for the insulation of buildings or

33、in-situ cellulose products for the insulation of building equipment and industrial installations. Nor does it specify performance requirements. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application.

34、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15101-1, Thermal insulation products for buildings In-situ formed loose-fill cellulose (LFCI) products Part 1: Specification for the prod

35、ucts before installation 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 open blow applications all the horizontal applications where the final upper surface of the installed insulation prod

36、ucts remains uncovered EXAMPLE Galleries, lofts, ceilings and floors. 3.1.2 cavity applications applications where the installed insulation product is created in an enclosed space EXAMPLE Frame wall, roof and floor constructions. 3.1.3 floor horizontal division between two storeys, over a crawl spac

37、e or a floor directly on the ground 3.1.4 settlement decrease of installed insulation thickness in lofts or height in cavities and frame constructions with vibrations, humidity, cyclic climate conditions and time, expressed as a percentage of the initial installed thickness DIN EN 15101-2:2013-12 EN

38、 15101-2:2013 (E) 6 3.1.5 coverage mass of insulation per unit area 3.1.6 performance chart table giving thickness and coverage requirements for different values of declared thermal resistance 3.1.7 system particular type of loose-fill cellulose insulation used in conjunction with a blowing machine

39、with a blowing hose and nozzle 3.1.8 blowing hole hole, cut or formed, in a wall or frame construction, through which the cellulose is blown 3.1.9 declared installed thickness for open blow applications thickness as installed by the installer, prior to any settlement 3.1.10 loose-fill cellulose insu

40、lation (LFCI) fibre, fibrous or granulated insulation products derived from paper, paper stock and/or wood, leave or stalk strings with or without binders which are blown, injected or applied with or without moisture 3.1.11 frame wall, roof and floor constructions walls with wood or metal studs, slo

41、ping roof with insulation between and above rafters, as well as stud girders and internal and external insulation on solid masonry construction 3.2 Symbols and abbreviations 3.2.1 Symbols used in this standard: K is the declared installed insulation density Kg/m3R is the thermal resistance m2 K/W SH

42、 is the declared class for settlement for open blow applications SC is the declared class of settlement for cavity applications RDis the declared installed thermal resistance m2 K/W Wpis the short-term water absorption kg/m2d is the declared installed insulation thickness m s is the relative reducti

43、on in thickness, due to settlement % Dis the declared thermal conductivity W/(m K) 3.2.2 Abbreviations used in this standard LFCI Loose-Fill Cellulose Insulation DIN EN 15101-2:2013-12 EN 15101-2:2013 (E) 7 4 Requirements 4.1 General The installer shall use an insulation product that conforms to EN

44、15101-1. The installer shall inspect the building in accordance with manufacturers technical information and national rules in order to determine whether it is suitable for the application of the product. In the absence of any national rules, the inspection shall be in accordance with the informatio

45、n given in Annex E. Properties of the installed product shall be assessed in accordance with Clause 5. To conform to this standard, products shall meet the requirements of 4.2 and 4.3 as applicable. One test result on a product property is the average of the measured values on the number of test spe

46、cimens given in Table 1. The installer is not responsible for calculating the declared thermal values. These are given in the appropriate product suppliers performance charts. Accordingly, the installer can only check whether the installed insulation product is within the declared density and thickn

47、ess range. 4.2 Declared installed insulation thickness and declared installed insulation density for open blow applications (e.g. lofts) The declared installed insulation thickness (d) and declared installed density (k) shall be assessed by measurement of the: declared installed insulation thickness

48、 according to 5.2; declared installed insulation density according to 5.3. The mean value for the installed thickness to cover a declared thermal resistance shall not be less than the minimum value given by the relevant manufacturers performance chart for loft insulation (the performance chart shows the relationship between the declared thermal resistance, the declared density range and the installed thickness). The installed number of bags and the declared installed insulation density shall be