DIN EN 1514-6-2004 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6 Covered serrated metal gaskets for use with steel flanges German version EN 1.pdf

1、ICS 23.040.80Flanges and their jointsDimensions of gaskets for PN-designated flangesPart 6: Covered serrated metal gaskets for use with steel flangesEnglish version of DIN EN 1514-6Flansche und ihre Verbindungen Mae fr Dichtungen fr Flansche mit PN-Bezeichnung Teil 6:Kammprofildichtungen fr Stahlfla

2、nscheEuropean Standard EN 1514-6 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been prepared by CEN/TC 74 Flanges and their joints (Secretariat: Germany).The responsible German body involved in its preparation was the Normenausschuss

3、 Rohrleitungen undDampfkesselanlagen (Pipelines and Pressure Vessels Standards Committee), Technical Committee Flanscheund ihre Verbindungen.It should be noted that the use of materials containing asbestos (which are not explicitly excluded in thescope of this standard) is prohibited in Germany.Amen

4、dmentsDIN 2697, January 1972 edition, has been superseded by the specifications of EN 1514-6.Previous editionsDIN 2697: 1944x-09, 1972-01.DEUTSCHE NORM March 2004DIN EN 1514-6 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Be

5、uth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Normenausschuss Bauwesen (NABau) im DINEnglish price group 10www.din.dewww.beuth.de06.04 9557736Continued overleaf.Document comprises 14 pages.Supersedes DIN 2697,January 1972 edition.English ver

6、sionICS 23.040.80Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungFlanges and their jointsDimensions of gaskets for PN-designated flangesPart 6: Covered serrated metal gaskets for use with steel fl

7、anges 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 1514-6 : 2003 EBrides et leurs assemblages Dimen-sions des joints pour les brides d-signes PN Partie 6: Joints mtalli-ques stris revtus pour utilisationavec des brides en ac

8、ierFlansche und ihre Verbindungen Mae fr Dichtungen fr Flansche mitPN-Bezeichnung Teil 6: Kamm-profildichtungen fr StahlflanscheThis European Standard was approved by CEN on 2003-11-03.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving

9、this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (Englis

10、h, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic,

11、 Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.December 2003EN 1514-6Page 2EN 1514-6 : 2003PagePage 3EN 1514-6 : 2003Page 4EN 1514-6 : 2003Page 5EN 1514-6 : 2003Page 6EN 1514-6 : 2003Page 7EN 1514-6 : 2003Page 8EN 1514-6 : 2003Page 9EN 1514-6 : 2003Page 10EN 1514-6 : 2003Page 11EN 1514-6 : 2003Page 12EN 1514-6 : 2003Page 13EN 1514-6 : 2003