DIN EN 15219-2008 Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance safety and testing(includes Amendment A1 2007) English vers.pdf

1、February 2008DEUTSCHE NORM English price group 13No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.060.20; 91.140.60!

2、$L=S“1412648www.din.deDDIN EN 15219SupersedesDIN EN 15219:2007-02www.beuth.deWater conditioning equipment inside buildings Nitrate removal devices Requirements for performance, safety and testing (includes Amendment A1:2007) English version of DIN EN 15219:2008-02 Anlagen zur Behandlung von Trinkwas

3、ser innerhalb von Gebuden Nitratentfernungsanlagen Anforderungen an Ausfhrung, Sicherheit und Prfung (enthlt nderung A1:2007) Englische Fassung DIN EN 15219:2008-02 Document comprises 27 pagesDIN EN 15219:2008-02 2 National foreword This standard has been prepared by Technical Committee CEN/TC 164 “

4、Water supply” (Secretariat: AFNOR, France). The preliminary work was done by Working Group WG 13 “Water conditioning equipment inside buildings”, lead-managed by DIN, Germany. The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (Water Practice Standards Commit

5、tee), Technical Committee NA 119-04-07-01 UA Wasserbehandlung. Amendments This standard differs from DIN EN 15219:2007-02 as follows: a) The title of the standard has been made more precise. b) A new Annex B (normative) has been added. Previous editions DIN EN 15219: 2007-02 EUROPEAN STANDARD NORME

6、EUROPENNE EUROPISCHE NORM EN 15219:2006+A1 November 2007 ICS 91.140.60 Supersedes EN 15219:2006 English Version Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing Appareils de traitement deau lintrieur des btiments - Dispositifs

7、 de dnitratation - Exigences de performances, de scurit et dessais Anlagen zur Behandlung von Trinkwasser innerhalb von Gebuden - Nitratentfernungsanlagen - Anforderungen an Ausfhrung, Sicherheit und Prfung This European Standard was approved by CEN on 4 November 2006 and includes Amendment 1 approv

8、ed by CEN on 21 October 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

9、standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif

10、ied to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

11、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of ex

12、ploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15219:2006+A1:2007: EEN 15219:2006+A1:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Requirements.7 4.1 Nitrate removal devices specification .7 4.2 Qu

13、ality of materials and chemicals7 4.3 Design and manufacturing specifications 7 4.4 Operating specifications.9 4.5 Installation specifications.10 5 Labelling .10 5.1 Identification of equipment.10 5.2 Safety labelling.10 6 Technical documentation .10 7 Test methods11 7.1 Test conditions 11 7.2 Anion

14、 exchange resin .13 7.3 Technical documentation .13 7.4 Manufacturing tests.13 7.5 Operating characteristics .15 Annex A (informative) Principles of nitrate reduction using anionic exchange resins .18 Annex B (normative) Installation, operation and maintenance20 Bibliography 25 DIN EN 15219:2008-02

15、EN 15219:2006+A1:2007 (E) 3 Foreword This document (EN 15219:2006+A1:2007) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This document shall be given the status of a national standard, either by publication of an identical text or by e

16、ndorsement, at the latest by May 2008 and conflicting national standards shall be withdrawn at the latest by May 2008. This document includes Amendment 1, approved by CEN on 2007-10-21. This document supersedes EN 15219:2006. The start and finish of text introduced or altered by amendment is indicat

17、ed in the text by tags ! “. With respect of potential adverse effects on the quality of water intended for human consumption caused by the product covered by this European Standard, the following is pointed out to the user: 1) this European Standard provides no information as to whether the product

18、may be used without restriction in any of the Member States; 2) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force. According to the CEN/CENELEC Internal Reg

19、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net

20、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 15219:2008-02 EN 15219:2006+A1:2007 (E) 4 1 Scope This European Standard specifies requirements relating to the construction and mode of operation and relevant methods for testing a

21、utomatic, salt-regenerated, anion exchange nitrate removal devices for drinking water installations inside buildings, which are permanently connected to the mains supply. NOTE Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrang

22、ements that ensure fitness for contact with drinking water. The Member States relevant regulators and the EC Commission agreed on the principle for a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level. If and when the EAS is

23、 adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136, which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain appl

24、icable. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 973, Chemicals

25、used for treatment of water intended for human consumption Sodium chloride for regeneration of ion exchangers EN 1717, Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow EN 14743, Water conditioning equipment insi

26、de buildings Softeners Requirements for performance, safety and testing !EN 15161, Water conditioning equipment inside buildings Installation, operation, maintenance and repair“ EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) E

27、N ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) EN ISO 3822-1, Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement

28、 (ISO 3822-1:1999) EN ISO 3822-3, Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1984) EN ISO 10304-1, Water quality Determination of dissolved fluor

29、ide, chloride, nitrite, orthophosphate, bromide, nitrate and sulphate ions, using liquid chromatography of ions Part 1: Method for water with low contamination (ISO 10304-1:1992) EN ISO 11885, Water quality Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO

30、11885:1996) ISO 7-1, Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation DIN EN 15219:2008-02 EN 15219:2006+A1:2007 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 blending dev

31、ice internal or external device used to blend treated with untreated water 3.2 brining main phase of the regeneration process, during the course of which the brine flows through the bed of resin for the purpose of exchanging the nitrate ions fixed during the service run by chloride ions, and thereby

32、 recovering the exchange capacity of the resin bed 3.3 brining efficiency link, expressed in grams of nitrate ion (NO3-) per kilogram of salt, between the exchange capacity and the salt consumption 3.4 anion exchange resin synthetic material that has the capability to exchange anions reversibly 3.5

33、continuous flow rate maximum flow rate at which a duplex appliance can operate continuously (24 h a day) without a premature breakthrough of nitrate 3.6 duplex appliance system employing two resin tanks, enabling the production of uninterrupted treated water supply 3.7 exchange capacity of the nitra

34、te removal unit quantity of nitrate, expressed in grams of nitrate ion, fixed by the device between the end of the last regeneration and the beginning of the exhaustion of the resin NOTE 1 The end of the regeneration is defined as the moment when the unit is available for service. NOTE 2 The resin i

35、s considered to be exhausted when the residual nitrate concentration of the treated water increases above a defined value. 3.8 monitoring device time controller, flow integrator, resin exhaustion sensor or a combination of these, used to determine the appropriate moment in the operating cycle for re

36、generation to begin and to initiate that regeneration 3.9 nominal flow rate flow rate of water, expressed in cubic metres per hour, at which a pressure drop of maximum 100 kPa is established 3.10 operating cycle two successive and repetitive runs: the treated water run (or service) and the regenerat

37、ion run DIN EN 15219:2008-02 EN 15219:2006+A1:2007 (E) 6 3.11 operating range physical and chemical conditions (temperature, pressure, flow rate, chemical water composition) within which a nitrate removal unit can operate and meet its performance guarantees 3.12 pressure drop decrease in pressure be

38、tween the inlet and outlet of the unit, expressed in kilopascals, at nominal flow rate 3.13 regeneration process part of operating cycle, during which all the operations needed to restore the ion exchange capacity of a resin bed are carried out 3.14 regeneration water quantity of water, expressed in

39、 litres (or in cubic meters), necessary for a complete regeneration process, including water used for the preparation of the brine 3.15 residual nitrate concentration nitrate concentration of water sampled at the outlet of a unit during the service run 3.16 salt consumption quantity of salt, express

40、ed in kilograms, used for each regeneration 3.17 salt tank tank containing the regenerating salt and the brine production device 3.18 nitrate removal device complete installation necessary for the production of treated water 3.19 nitrate removal unit appliance employing the anion exchange principle

41、and which generally comprises the following constituent parts: pressure vessel containing the anionic ion exchange resin and devices for distributing and collecting hydraulic flows; devices for monitoring hydraulic flows (water and brine) through a multi-way valve or a set of pipes and multiple valv

42、es; tank (called salt-tank) for storage of the regeneration salt and production of the brine 3.20 volume of resin quantity of anion exchange resin, expressed in litres, indicated on the rating plate or in the technical documentation DIN EN 15219:2008-02 EN 15219:2006+A1:2007 (E) 7 4 Requirements 4.1

43、 Nitrate removal devices specification Nitrate removal devices shall include all of following features and equipment: a) resin tank, control valve, brine tank, monitoring device; b) automatic regeneration; c) continuity of supply during regeneration; d) manual override facility; e) protection agains

44、t backflows. Some devices in the market are intended to remove nitrates and to soften water simultaneously (see Annex A). These are commonly known as “mixed beds” and include a mixture of anionic and cationic resin that regenerates simultaneously. These devices shall comply with this European Standa

45、rd and also with EN 14743, except for the items stated in 4.3.8 and 4.4.4 and relevant tests that are specifically covered in this European Standard for this kind of devices. NOTE When necessary to meet national or local provisions, the nitrate removal devices may be required to include additional f

46、eatures; for example: automatic initiated regeneration after a certain period without regeneration; feature to control microbiological growth. 4.2 Quality of materials and chemicals 4.2.1 Anion exchange resin The anion exchange resin used in the nitrate removal device shall be certified by the resin

47、 manufacturer to be suitable for its intended application. 4.2.2 Regenerating salt Salt shall comply with national and local regulations. All requirements of this European Standard are based on the use of sodium chloride (NaCl) in accordance with EN 973 as regenerating salt. NOTE Some countries also

48、 allow the use of potassium chloride (KCl) as regenerating salt. 4.3 Design and manufacturing specifications 4.3.1 Resistance to hydrostatic pressure The nitrate removal unit shall resist, without visible damage nor leakage, a hydrostatic pressure of 1,5 times the maximum design pressure or 1 000 kP

49、a, whichever is the greater for 10 20+min as defined in 7.4.1. 4.3.2 Resistance to cyclic pressure The nitrate removal unit shall resist, without visible damage nor leakage, a cyclic pressure test of not less than 5 000 cycles with the pressure fluctuating at a frequency of 15 21+cycles per minute between 150 kPa and 1,3 times the maximum design pressure as defined in 7.4.2. DIN EN 15219:2008-02 EN 15219:2006+A1:2007 (E) 8 4.3.3 Minimum and maximum operating pressure When tested in accordance with 7.1.3 d), the nit