DIN EN 15385-2007 Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding English version of DIN EN 15385 2007-11《包装 柔性叠层管 测定头部焊接强度的试验方法》.pdf

1、November 2007DEUTSCHE NORM English price group 8No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 55.120!$J;“1392496www.

2、din.deDDIN EN 15385Packaging Flexible laminate tubes Test methods to determine the strength of the head weldingEnglish version of DIN EN 15385:2007-11Packmittel Laminattuben Prfverfahren zur Bestimmung der Festigkeit der KopfnahtEnglische Fassung DIN EN 15385:2007-11www.beuth.deDocument comprises 9

3、pagesDIN EN 15385:2007-11 2 National foreword This standard has been prepared by Technical Committee CEN/TC 261 “Packaging” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen (Packaging Standards Committee), Technical Commit

4、tee NA 115-02-08 AA Tuben. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15385August 2007ICS 55.120English VersionPackaging - Flexible laminate tubes - Test methods to determinethe strength of the head weldingEmballage - Tubes souples lamins - Mthodes dessaipour dterminer la rsistance de la soud

5、ure de la ttePackmittel - Laminattuben - Prfverfahren zur Bestimmungder Festigkeit der KopfnahtThis European Standard was approved by CEN on 13 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the stat

6、us of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A v

7、ersion in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, De

8、nmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATI

9、ONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15385:2007: EEN 15385:2007 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4

10、3 Principle 4 4 Test equipment 4 5 Test operation 5 6 Test report 6 Bibliography 7 EN 15385:2007 (E) 3 Foreword This document (EN 15385:2007) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This document shall be given the status of a natio

11、nal standard, either by publication of an identical text or by endorsement, at the latest by February 2008 and conflicting national standards shall be withdrawn at the latest by February 2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following co

12、untries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

13、pain, Sweden, Switzerland and United Kingdom. EN 15385:2007 (E) 4 1 Scope This European Standard specifies a method for the determination of the strength of the head welding of flexible laminate tubes. It is applicable to flexible laminate tubes used for packing pharmaceutical, cosmetic, hygiene, fo

14、od and other household products. 2 Normative references Not applicable. 3 Principle The test for the strength of the head welding is used to show whether the body laminate deforms before becoming detached from the shoulder. 4 Test equipment 4.1 Cutting device 4.2 Tensile/compression tester EN 15385:

15、2007 (E) 5 Key 1 force meter 2 clamp 3 strip 4 tube shoulder Figure 1 Tensile strength tester 5 Test procedure a) Cut four strips of equal width (each one quarter of the circumference) from the tube body at the positions shown on Figure 2, ensuring one strip has the side seam in the centre. The cut

16、should cover the entire length of the laminate web including the part over the shoulder. b) Pull opposing pair of strips at a speed of 130 mm/min and attempt to remove material from shoulder. c) Ensure that the material has a good weld to the shoulder. The body laminate should stretch/deform not bec

17、ome detached below 3 N/mm of strip width. d) Repeat for second pair of cut strips. EN 15385:2007 (E) 6 Key 1 tube shoulder 2 side seam 3 strips Figure 2 Test configuration of the tube 6 Test report If not otherwise agreed between supplier and customer the test report shall contain the following info

18、rmation: a) reference to this European Standard, i.e. EN 15385 and, if necessary, a specification for the method of sampling and acceptance of the batch; b) the complete identification of the batch and of the tubes checked; c) the number of tubes checked; d) the number of defects; e) the test result

19、; f) all factors which could have affected the results or all operating details not specified in this European Standard; g) date, place of test and name of tester. EN 15385:2007 (E) 7 Bibliography 1 EN 12374, Packaging Flexible tubes Terminology 2 EN 13461, Packaging Cylindrical flexible laminated tubes Dimensions and tolerances