DIN EN 15491-2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method English version of DIN EN 15491 2007-11《作为汽油混合组分之一.pdf

1、November 2007DEUTSCHE NORM English price group 7No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.160.20!$J3(“1391605

2、www.din.deDDIN EN 15491Ethanol as a blending component for petrol Determination of total acidity Colour indicator titration methodEnglish version of DIN EN 15491:2007-11Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff Bestimmung der Gesamtsurezahl Farbindikator-TitrationEnglische Fassung

3、 DIN EN 15491:2007-11www.beuth.deDocument comprises 10 pagesDIN EN 15491:2007-11 2 National foreword This standard has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin” (Secretariat: NEN, Netherlan

4、ds). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Technical Committee NA 062-06-81 AA Gasfrmige und flssige Kraft- und Brennstoffe, Schmierstoffe und verwandte Produkte mit minerallstmmiger, synthetischer oder

5、 biologischer Herkunft of the Fachausschuss Minerall- und Brennstoffnormung (FAM). EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15491August 2007ICS 71.080.60English VersionEthanol as a blending component for petrol - Determination oftotal acidity - Colour indicator titration methodDtermination

6、de lacidit totale - Mthode de titrage parindicateur colorEthanol zur Verwendung als Blendkomponente inOttokraftstoff - Bestimmung der Gesamtsurezahl -Farbindikator-TitrationThis European Standard was approved by CEN on 30 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regula

7、tions which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This Euro

8、pean Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the natio

9、nal standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Uni

10、ted Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15491:2007: Eth

11、anol comme base de mlange lessence -EN 15491:2007 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Normative references . 4 3 Terms and definitions. 4 4 Principle . 4 5 Reagents and materials 4 6 Apparatus 5 7 Sampling and sample handling . 6 8 Procedure 6 9 Calculation. 6 10 Expression of results 6 11 P

12、recision 7 11.1 General. 7 11.2 Repeatability, r 7 11.3 Reproducibility, R . 7 12 Test report . 7 Bibliography . 8 EN 15491:2007 (E) 3 Foreword This document (EN 15491:2007) has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, sy

13、nthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the

14、 latest by February 2008. This document was prepared by CEN/TC 19s Ethanol Task Force and is based on the Energy Institute standard IP 538 1. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa

15、rd: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 15

16、491:2007 (E) 4 1 Scope This European Standard specifies a method for determining the total acidity, calculated as acetic acid, of ethanol to be used in petrol blends. It is applicable to ethanol having total acid contents of between 0,003 % (m/m) to 0,015 % (m/m). NOTE For the purposes of this Europ

17、ean Standard, the term “% (m/m)” and “% (V/V)” are used to represent the mass fraction and the volume fraction respectively. WARNING Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with it

18、s use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document.

19、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 3170, Petroleum liquids Manual sampling (ISO 3170:2004) EN ISO 3696, Water for analytical laboratory use Specification and test metho

20、ds (ISO 3696:1987) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 total acidity acidity, calculated as acetic acid, determined by titration and colour indicator as given in this standard 4 Principle A test portion of the ethanol is

21、mixed with an equal volume of neutralized, carbon dioxide free water. The acid content is titrated with potassium hydroxide solution, to the neutral endpoint of phenolphthalein. The total acidity is then calculated as acetic acid. 5 Reagents and materials Use only reagents of recognized analytical g

22、rade and water complying with the requirements of grade 3 of EN ISO 3696. 5.1 Potassium hydrogen phthalate 5.2 Potassium hydroxide solution 0,01 mol/l, a solution prepared in accordance with 5.2.1 or a commercially available standardized potassium hydroxide solution of equivalent concentration and p

23、urity. The reagent shall be protected against carbon dioxide absorption and restandardized frequently enough to detect concentration changes of 0,000 5 mol/l. EN 15491:2007 (E) 5 5.2.1 Dissolve approximately 0,6 g potassium hydroxide in 1 l of water and standardize using potassium hydrogen phthalate

24、 in accordance with 5.2.2. 5.2.2 Dry a quantity of potassium hydrogen phthalate (5.1) in an oven at approximately 120 C for approximately 2 h. Place in a desiccator and allow to cool. Weigh approximately 0,1 g to the nearest 0,1 mg into a 250 ml flask and record this mass. Add approximately 50 ml of

25、 carbon dioxide free water (5.5) and swirl to dissolve. Add 2 drops of phenolphthalein indicator solution (5.3) and using a 50 ml burette (6.5), titrate to neutral endpoint with the potassium hydroxide solution. Carry out a blank determination using the same volume of carbon dioxide free water (5.5)

26、. Calculate the concentration C, in moles per litre, of the potassium hydroxide solution from the equation: ()0123,2041000VVmC= (1) where m is the mass, in grams, of potassium hydrogen phthalate; V1is the volume, in millilitres, of potassium hydroxide solution for the titration; V0 is the volume, in

27、 millilitres, of potassium hydroxide used for the blank. 5.3 Phenolphthalein indicator solution, approximately 10g/l Weigh approximately 1 g of phenolphthalein into the 100 ml volumetric flask (6.1). Add approximately 20 ml of ethanol (5.4) and swirl until dissolved. Make up to 100 ml with ethanol.

28、5.4 Ethanol, approximately 95 % (V/V). 5.5 Carbon dioxide free water NOTE A suitable way of preparing carbon dioxide free water is to place approximately 100 ml of water in a 250 ml conical flask (6.3), fitted with a standard ground glass joint, heat to boiling on either a hot plate or gas burner an

29、d boil for 2 min to 3 min. Remove the flask and its contents from the heat and insert a soda-lime filled guard tube (6.7) and cool to ambient temperature before use. 5.6 Soda lime, for the guard tube (optional). 5.7 Nitrogen, carbon dioxide free (optional). 6 Apparatus 6.1 Volumetric flask, Class A,

30、 100 ml capacity. 6.2 Measuring cylinder, 100 ml capacity. 6.3 Conical flask, glass, with standard ground glass joint, approximately 250 ml capacity. 6.4 Burette, Class A 50 ml capacity. 6.5 Burette, Class A 10 ml capacity and graduated in 0,05 ml, or less, subdivisions. 6.6 Pipette, Class A 50 ml c

31、apacity. 6.7 Glass guard tube, with ground glass joint to fit the conical flask (6.3) (optional). EN 15491:2007 (E) 6 7 Sampling and sample handling 7.1 Unless otherwise specified, laboratory samples shall be obtained by the procedures described in EN ISO 3170. 7.2 Take care to minimise the uptake o

32、f atmospheric carbon dioxide during sampling and sample handling. 8 Procedure 8.1 Fill the 10 ml burette (6.5) with the potassium hydroxide solution (5.2). 8.2 Using the measuring cylinder (6.2) measure approximately 50 ml of carbon dioxide free water (5.5) into the conical flask (6.3). Add two drop

33、s of phenolphthalein solution (5.3). Titrate with the standardized potassium hydroxide solution (5.2) to a faint pink endpoint. 8.3 Using the pipette (6.6) add 50 ml of the test portion to the neutralised water. Stopper the flask and swirl to mix the test portion and the water. 8.4 Remove the stoppe

34、r and immediately titrate the mixture using the standardized potassium hydroxide to a faint pink end point. Take care not to prolong the titration as the up-take of atmospheric carbon dioxide by the ethanol water mix will appreciably affect the result. NOTE Atmospheric carbon dioxide can be prevente

35、d from entering the titration flask by bubbling nitrogen (5.7) through the solution during the titration. 8.5 If the density of the ethanol to be tested is not known, determine it, in g/ml, at 15 C to two decimal places. 9 Calculation Calculate the total acidity, As, as acetic acid, of the sample in

36、 % (m/m), using the following equation: 0,12s=VCA (2) where C is the concentration, in moles per litre, of potassium hydroxide solution, see equation (1); V is the volume, in millilitres, of potassium hydroxide solution required to neutralize 50 ml of test portion; is the density, in grams per milli

37、litre, of the test portion at 15 C. 10 Expression of results Report the total acidity content of the sample to the nearest 0,001 % (m/m). EN 15491:2007 (E) 7 11 Precision 11.1 General The precision given was derived from statistical analysis by EN ISO 4259 2 of the results of interlaboratory testing

38、 of a matrix of ethanol samples produced in Europe from biomaterials such as raw wine, molasses, pulp and corn. NOTE The interlaboratory testing and the statistical evaluation are detailed in Research Report IP 538 3. 11.2 Repeatability, r The difference between two test results, obtained by the sam

39、e operator with the same apparatus under constant operating conditions on identical test material would in the long run, in the normal and correct operation of the test method, exceed the following value in only one case in twenty. r = 0,000 960 4 11.3 Reproducibility, R The difference between two s

40、ingle and independent results, obtained by different operators working in different laboratories on identical test material, would in the long run, in the normal and correct operation of the test method, exceed the following value only in one case in twenty. R = 0,001 370 12 Test report The test rep

41、ort shall contain at least the following information: a) reference to this European Standard, i.e. EN 15491; b) type and complete identification of the product tested; c) result of the test (see 10); d) any deviation, by agreement or otherwise, from the procedure specified; e) date of the test. EN 1

42、5491:2007 (E) 8 Bibliography 1 IP 538/06, Determination of the total acidity of ethanol Colour indicator titration method. Available from the Energy Institute, 61 New Cavendish Street, London, W1G 7AR, UK. 2 EN ISO 4259, Petroleum products Determination and application of precision data in relation to methods of test (ISO 4259:2006). 3 Research Report: IP 538/06, Precision evaluation on IP 538, Determination of the total acidity of ethanol Colour indicator titration method. Available from the Energy Institute, 61 New Cavendish Street, London, W1G 7AR, UK.