1、August 2015 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 97.220.10!%E2“2341592www.din.deDDIN EN 15567-1Sports and recreational facilities Ropes courses Part 1: Construction and safety requirements;English version EN 15567-1:2015,English translation of DIN EN 15567-1:2015-08Sport- und Freizeitanlagen Seilgrten Teil 1: Konstruktion und sicherheitstechnisch
3、e Anforderungen;Englische Fassung EN 15567-1:2015,Englische bersetzung von DIN EN 15567-1:2015-08Structures de sport et dactivits de plein air Parcours acrobatiques en hauteur Partie 1: Exigences de construction et de scurit;Version anglaise EN 15567-1:2015,Traduction anglaise de DIN EN 15567-1:2015
4、-08SupersedesDIN EN 15567-1:2008-03www.beuth.deDocument comprises 41 pagesIn case of doubt, the German-language original shall be considered authoritative.07.15DIN EN 15567-1:2015-08 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-08-01
5、. National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN 15567-1:2015) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipm
6、ent” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Sport- und Freizeitgert (DIN Standards Committee Sports Equipment), Working Committee NA 112-01-09 AA Seilgrten. Where this standard has been identified by the Ausschuss fr Produktsi
7、cherheit (German Committee for Product Safety) and reference to it has been published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be pres
8、umed that ropes courses which comply with this standard fulfil the relevant health and safety requirements. The European Standards referred to in this document have been published as DIN EN Standards with the same number. The DIN Standard corresponding to the International Standard referred to in th
9、is document is as follows: ISO 4309 DIN ISO 4309 Amendments This standard differs from DIN EN 15567-1:2008-03 as follows: a) Clause 3 “Terms and definitions” has been revised; b) Subclause 4.2.4 “Wire ropes” has been revised; c) Subclause 4.2.5 “Synthetic ropes” has been added; d) Subclause 4.3.2 “I
10、nfluence of loads” has been revised; e) Subclause 4.3.3.3 “Safety requirements for natural supporting structures” has been revised; f) Subclause 4.3.4.2 “Zip lines” has been revised; g) Subclause 4.3.5 “Safety system” has been revised; h) Subclause 4.4 “Personal protective equipment (PPE)” has been
11、revised; i) Clause 7 “Inspection and maintenance” has been revised; j) Annex A “Minimum information to be included in an arboreal assessment report” has been revised; k) the former Annex B “Obtaining tree strength data” has been deleted; l) Annex C “Relevance of ISO 4309:2010 to EN 15567-1 for Ropes
12、 Courses” has been added; m) the standard has been editorially revised. DIN EN 15567-1:2015-08 3 Previous editions DIN EN 15567-1: 2008-03 DIN EN 15567-1:2015-08 4 National Annex NA (informative) Bibliography DIN ISO 4309, Cranes Wire ropes Care and maintenance, inspection and discard EUROPEAN STAND
13、ARD NORME EUROPENNE EUROPISCHE NORM EN 15567-1 May 2015 ICS 97.220.10 Supersedes EN 15567-1:2007English Version Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements Structures de sport et dactivits de plein air - Parcours acrobatiques en hauteur - Partie
14、1: Exigences de construction et de scurit Sport- und Freizeitanlagen - Seilgrten - Teil 1: Konstruktion und sicherheitstechnische Anforderungen This European Standard was approved by CEN on 12 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c
15、onditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard ex
16、ists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national s
17、tandards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
18、 Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means res
19、erved worldwide for CEN national Members. Ref. No. EN 15567-1:2015 EEN 15567-1:2015 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Safety requirements . 11 4.1 Choice of site 11 4.2 Material 11 4.2.1 General . 11 4.2.2 Timber and associ
20、ated products 12 4.2.3 Metals . 12 4.2.4 Wire ropes . 12 4.2.5 Synthetic ropes . 14 4.2.6 Synthetics and composites . 14 4.2.7 Dangerous substances 15 4.3 Design and manufacture 15 4.3.1 General safety requirements . 15 4.3.2 Influence of loads . 15 4.3.3 Support system . 17 4.3.4 Activity system 19
21、 4.3.5 Safety system 20 4.4 Personal protective equipment (PPE) 22 5 Test methods . 22 6 Marking 22 6.1 Element identification 22 6.2 Element marking . 22 6.2.1 Notices . 22 6.2.2 Ropes course difficulty 23 7 Inspection and maintenance . 23 7.1 Inspection 23 7.1.1 General . 23 7.1.2 Inaugural inspec
22、tion . 23 7.1.3 Modification inspection 23 7.1.4 Periodical inspection 24 7.1.5 Inspection reports. 24 7.2 Maintenance manual 25 8 Documents 26 8.1 General . 26 8.2 User manual for operators . 26 8.3 Arboreal assessment report 26 Annex A (normative) Minimum information to be included in an arboreal
23、assessment report . 27 Annex B (normative) Instructions for the use of the ropes course . 28 Annex C (informative) Relevance of ISO 4309:2010 to EN 155671 for Ropes Courses . 30 Annex D (informative) Guidance on risk assessment 35 Bibliography . 36 DIN EN 15567-1:2015-08 EN 15567-1:2015 (E) 3 Forewo
24、rd This document (EN 15567-1:2015) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an i
25、dentical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be
26、 held responsible for identifying any or all such patent rights. This document supersedes EN 15567-1:2007. EN 15567 consists of the following parts, under the general title, Sports- and recreational facilities Ropes courses: Part 1: Construction and safety requirements; Part 2: Operation requirement
27、s. The main changes to EN 15567-1:2007 are: a) terms and definitions revised (Clause 3); b) requirements for wire ropes revised (4.2.4); c) new clause for synthetic ropes included (4.2.5); d) influence of loads revised (4.3.2); e) requirements for trees revised (4.3.3.3); f) requirements for zip lin
28、es revised (4.3.4.2); g) requirements for safety systems revised (4.3.5); h) requirements for personal protective equipment revised in accordance with existing standards (4.4); i) requirements for inspection and maintenance revised (Clause 7); j) Annex A revised; k) Annex B deleted; l) new Annex C “
29、Relevance of ISO 4309:2010 to EN 15567-1 for ropes courses” added; m) correction of editorial errors. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
30、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the U
31、nited Kingdom. DIN EN 15567-1:2015-08 EN 15567-1:2015 (E) 4 Introduction Ropes courses vary considerably and may be used for educational, recreational, training or therapeutic purposes. Ropes course activities involve risks that should be managed by the manufacturers and operators. This is achieved
32、through careful design, manufacture, supervision, training, instruction, information etc. Ropes course activities should only be undertaken by those who are physically and mentally able to comply with the safety requirements specified by the operator. The various safety devices (for protection again
33、st falling from a height and collisions) consist of equipment designed to limit the consequences of falls or collisions. There are inherent risks associated with ropes courses. These risks should, however, be appropriately managed and reduced to an acceptable level by the ropes course operator. Howe
34、ver, it should be understood that such risks cannot be eliminated altogether. It should be noted that no safety system can prevent deliberate misuse. On the basis of a risk assessment, that takes into account the manufacturers manual, operators should take reasonably practicable measures to ensure t
35、he safety of participants and staff. This means that the degree of risks in a particular job/work place/facility need to be balanced against the time, trouble, cost, benefits and physical difficulty of taking measures to avoid or reduce the risk. Ropes course operators should also consider EN 15567-
36、2, when carrying out risk assessments. DIN EN 15567-1:2015-08 EN 15567-1:2015 (E) 5 1 Scope This European Standard applies to permanent and mobile ropes courses and their components. This European Standard specifies safety requirements for the design, construction, inspection and maintenance of rope
37、s courses and their components. This European Standard does not apply to temporary ropes courses (see 3.3) and childrens play grounds (see EN 1176 all parts). For the use of ropes courses EN 15567-2 applies. 2 Normative references The following documents, in whole or in part, are normatively referen
38、ced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 335, Durability of wood and wood-based products Use classes: definitions,
39、 application to solid wood and wood-based products EN 350-2:1994, Durability of wood and wood-based products Natural durability of solid wood Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe EN 351-1:2007, Durability of wood and wood-based product
40、s Preservative-treated solid wood Part 1: Classification of preservative penetration and retention EN 358, Personal protective equipment for work positioning and prevention of falls from a height Belts for work positioning and restraint and work positioning lanyards EN 361, Personal protective equip
41、ment against falls from a height Full body harnesses EN 636, Plywood Specifications EN 813, Personal fall protection equipment Sit harnesses EN 1176-1, Playground equipment and surfacing Part 1: General safety requirements and test methods EN 12277, Mountaineering equipment Harnesses Safety requirem
42、ents and test methods EN 12927-6, Safety requirements for cableway installations designed to carry persons Ropes Part 6: Discard criteria EN 13411-1, Terminations for steel wire ropes Safety Part 1: Thimbles for steel wire rope slings EN 13411-2, Terminations for steel wire ropes Safety Part 2: Spli
43、cing of eyes for wire rope slings EN 13411-3:2004+A1:2008, Terminations for steel wire ropes Safety Part 3: Ferrules and ferrule-securing EN 13411-4, Terminations for steel wire ropes Safety Part 4: Metal and resin socketing EN 13411-5, Terminations for steel wire ropes Safety Part 5: U-bolt wire ro
44、pe grips EN 13411-6, Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket DIN EN 15567-1:2015-08 EN 15567-1:2015 (E) 6 EN 13411-7, Terminations for steel wire ropes Safety Part 7: Symmetric wedge socket EN 15567-2:2015, Sports- and recreational facilities Ropes courses Part 2: Op
45、eration requirements ISO 4309:2010, Cranes Wire ropes Care and maintenance, inspection and discard 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ropes course constructed facility consisting of one or more activity systems, support systems a
46、nd, if needed, an appropriate safety system with restricted access and requiring supervision Note 1 to entry: See Figure 1. Key Activity systems A Support systems S Belaying systems B A1 A2 A3 Elements Platforms Access S1 S2 S3 Poles trees buildings, rock, other supporting structures Foundations, an
47、chors Guy lines B1 B2 B3 Assisted belaying system Safety line Safety system (categories A to E) Figure 1 Example of a ropes course 3.2 permanent ropes course facility installed for more than seven days on the same site 3.3 temporary ropes course facility that is not a mobile ropes course and is inst
48、alled for a maximum of seven days DIN EN 15567-1:2015-08 EN 15567-1:2015 (E) 7 3.4 mobile ropes course facility constructed in such a way that the support system is transportable from site to site 3.5 support system artificial and/or natural structure intended for installation of activity and safety
49、 systems Note 1 to entry: See Figure 1 for examples. 3.6 activity system facility that permits the progression of the participant EXAMPLE Examples are elements, platforms and access structures, see Figure 1. 3.7 element activity unit in a ropes course 3.8 platform raised area usually before or after an element on which participants can stand 3.9 giant swing activity system where the participant performs guided pendulums (to- and-fro movements) 3.10 zip line activity system in which
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1