DIN EN 15752-1-2014 Glass in building - Adhesive backed polymeric film - Part 1 Definitions and requirements German version EN 15752-1 2014《建筑用玻璃 粘合剂聚合物的贴膜 第1部分 定义和要求 德文版本EN 15752-.pdf

1、October 2014 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 83.140.10; 81.040.20!%;s7“2248020www.din.deDDIN EN 15752-1Glass in building Adhesive backed polymeric film Part 1: Definitions and requirements;English version EN 15752-1:2014,English translation of DIN EN 15752-1:2014-10Glas im Bauwesen Selbstklebende Polymerfolie Teil 1: Begriffe und Anforderung

3、en;Englische Fassung EN 15752-1:2014,Englische bersetzung von DIN EN 15752-1:2014-10Verre dans la construction Film polymre adhsif Partie 1: Dfinitions et exigences;Version anglaise EN 15752-1:2014,Traduction anglaise de DIN EN 15752-1:2014-10www.beuth.deIn case of doubt, the German-language origina

4、l shall be considered authoritative.Document comprises 38 pages 09.14 DIN EN 15752-1:2014-10 2 A comma is used as the decimal marker. National foreword This document (EN 15752-1:2014) has been prepared by Technical Committee CEN/TC 129 “Glass in building” (Secretariat: NBN, Belgium). The responsible

5、 German body involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-09-29 AA Glas im Bauwesen (SpA zu CEN/TC 129 und ISO/TC 160; SpA zu CEN/TC 129/WG 1, CEN/TC 129/WG 2, CEN/TC 129/WG 3, CEN/TC 129/WG 5, CEN

6、/TC 129/WG 6, CEN/TC 129/WG 7, CEN/TC 129/WG 8, CEN/TC 129/WG 9, CEN/TC 129/WG 10, CEN/TC 129/WG 12, CEN/TC 129/WG 13, CEN/TC 129/WG 14, CEN/TC 129/WG 15, CEN/TC 129/WG 17, CEN/TC 129/WG 18, CEN/TC 129/WG 19, ISO/TC 160/SC 1, ISO/TC 160/SC 1/WG 1, ISO/TC 160/SC 1/WG 2, ISO/TC 160/SC 1/WG 3, ISO/TC 1

7、60/SC 1/WG 5, ISO/TC 160/SC 1/WG 6, ISO/TC 160/SC 1/WG 7, ISO/TC 160/SC 1/WG 8, ISO/TC 160/SC 1/WG 9, ISO/TC 160/SC 2, ISO/TC 160/SC 2/WG 1, ISO/TC 160/SC 2/WG 2, ISO/TC 160/SC 2/WG 3, ISO/TC 160/SC 2/WG 5, ISO/TC 160/SC 2/WG 6, ISO/TC 160/SC 2/WG 7). EN 15752 consists of the following parts, under

8、the general title Glass in building Adhesive backed polymeric film: Part 1: Definitions and requirements Part 2: Evaluation of conformity/product standard (currently in progress). EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15752-1 August 2014 ICS 81.040.20; 83.140.10 English Version Glass

9、in building - Adhesive backed polymeric film - Part 1: Definitions and requirements Verre dans la construction - Film polymre adhsif - Partie 1: Dfinitions et exigences Glas im Bauwesen - Selbstklebende Polymerfolie - Teil 1: Begriffe und Anforderungen This European Standard was approved by CEN on 1

10、5 May 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o

11、btained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the

12、 CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel

13、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Cen

14、tre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15752-1:2014 EEN 15752-1:2014 (E) 2 Contents Page Foreword 5 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms and definitions .8

15、4 Types of adhesive backed polymeric films 10 5 Properties of adhesive backed polymeric films 11 5.1 General . 11 5.1.1 Performance characteristics . 11 5.1.2 Test specimens . 13 5.2 Solar-optical properties . 13 5.2.1 General . 13 5.2.2 Glare reduction . 15 5.2.3 Total Solar Energy Rejected 15 5.2.

16、4 UV Rejection 15 5.3 Solar control film 15 5.3.1 General . 15 5.3.2 Measurement . 15 5.4 Clear film 16 5.5 Safety film 16 5.5.1 General . 16 5.5.2 Measurement . 16 5.6 Security film 17 5.6.1 General . 17 5.6.2 Measurement . 17 5.7 Decorative film 17 5.7.1 General . 17 5.7.2 Measurement . 17 5.8 Ant

17、i-graffiti film . 18 5.9 Ultra Violet reducing film . 18 5.9.1 General . 18 5.9.2 Measurement . 18 5.10 Lower emissivity film . 18 5.10.1 General . 18 5.10.2 Measurement . 18 5.11 Privacy film 19 5.12 Radio Frequency / Electro-Magnetic Frequency shield attenuating film 19 5.12.1 General . 19 5.12.2

18、Measurement . 19 6 Dimensions and tolerances . 19 6.1 Nominal thickness and thickness tolerances 19 6.1.1 General . 19 6.1.2 Measurement . 19 6.2 Width and length (sizes) 20 6.2.1 General . 20 6.2.2 Splices . 20 7 Test methods for durability . 20 DINEN 15752-1:2014-10EN 15752-1:2014 (E) 3 7.1 Genera

19、l . 20 7.2 Accelerated weathering test method 21 7.2.1 General . 21 7.2.2 Preparation of test and reference specimens 21 7.2.3 Size and number of test specimens 21 7.2.4 Cleaning of filmed glass specimens . 21 7.2.5 Conditioning of test and reference specimens 21 7.2.6 Test methodology 21 7.2.7 Acce

20、lerated weathering - procedure . 22 7.2.8 Sampling points . 22 7.3 Accelerated weathering changes in physical and solar-optical properties . 23 7.3.1 General . 23 7.3.2 Solar optical properties 23 7.3.3 Emissivity . 24 7.3.4 Additional tests on adhesive backed polymeric safety / security films Adhes

21、ive Strength 24 7.4 Scratch / abrasion resistance 25 7.4.1 General . 25 7.4.2 Number of test specimens 25 7.4.3 Preparation of test specimens . 25 7.4.4 Conditioning of test specimens . 26 7.4.5 Cleaning of test specimens 26 7.4.6 Pre-abrasion haze measurement . 26 7.4.7 Abrasion test method 28 7.4.

22、8 Post-abrasion haze measurement . 28 7.4.9 Calculation of Haze . 29 7.4.10 Test report 29 7.5 Acceptance criteria changes in performance after accelerated weathering 29 7.5.1 Solar optical properties 29 7.5.2 Emissivity . 30 7.5.3 Adhesive strength for adhesive backed polymeric safety / security fi

23、lm . 30 7.5.4 Change in Haze after abrasion 30 Annex A (normative) Abrasion testing of adhesive backed polymeric film with measurement of haze . 31 A.1 Introduction 31 A.2 Definitions and Descriptions 31 A.2.1 Haze 31 A.2.2 Haze 31 A.3 Test Equipment 31 A.3.1 Abrader . 31 A.3.2 Refacing Stone 31 A.3

24、.3 Abrasive Wheels 31 A.3.4 Specimen Holder . 32 A.3.5 Hazemetre 32 A.3.5.1 Instrument 32 A.3.5.2 Interior surfaces 32 A.3.5.3 Light trap 32 A.3.5.4 Entrance and exit ports . 32 A.3.5.5 Photocells position . 32 DIN EN 15752-1:2014-10 EN 15752-1:2014 (E) 4 A.3.5.6 Light source and photodetector 32 A.

25、3.5.7 Incident light beam . 32 A.3.5.8 Specimen position 33 A.3.5.9 Validity . 33 A.3.6 Preparation of abrading wheels 33 A.4 Haze Measurement . 34 A.5 Calibration . 34 Bibliography . 36 DIN EN 15752-1:2014-10 EN 15752-1:2014 (E) 5 Foreword This document (EN 15752-1:2014) has been prepared by Techni

26、cal Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2015, and conflicting national standards shall be wi

27、thdrawn at the latest by February 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulati

28、ons, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

29、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DINEN 15752-1:2014-10EN 15752-1:2014 (E) 6 Introduction Adhesive backed polymeric film is designed to be applied to glass to modify t

30、he properties and performance of the glass. Different types of adhesive backed polymeric films are manufactured to modify specific properties of glass including solar energy transmittance, visible light transmittance, emissivity, Ultra Violet transmittance, privacy, appearance, impact behaviour, sec

31、urity, electromagnetic frequency (EMF) attenuation, and surface protection. DIN EN 15752-1:2014-10 EN 15752-1:2014 (E) 7 1 Scope This European Standard defines adhesive backed polymeric film based on biaxially oriented polyester film, and the performance characteristics of adhesive backed polymeric

32、film for use on glass in buildings. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to other glass or glazing products, e.g. laminated glass or insulating glass units, w

33、hen adhesive backed polymeric film is included as part of the original assembly or manufacture of the glazing product. These additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristic

34、s. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

35、endments) applies. EN 356, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410:2011, Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate glass products - Par

36、t 1: Definitions and general physical and mechanical properties EN 572-2, Glass in building - Basic soda lime silicate glass products - Part 2: Float glass EN 673, Glass in building - Determination of thermal transmittance (U value) - Calculation method EN 12600, Glass in building - Pendulum test -

37、Impact test method and classification for flat glass EN 12898, Glass in building - Determination of the emissivity EN 50147-1, Anechoic chambers - Part 1: Shield attenuation measurement EN ISO 4892-1, Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1)

38、EN ISO 4892-2, Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2) EN ISO 8510-2, Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2) ISO 16933, Glass in building Explosion-resistant security

39、 glazing Test and classification for arena air-blast loading DIN EN 15752-1:2014-10 EN 15752-1:2014(E)8 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 adhesive backed polymeric film one or more layers of polymeric film with an adhesive on on

40、e external face Note 1 to entry: It may also incorporate one or more of the following: colouring, UV absorbers, UV inhibitors, metal layer(s), metal alloy layer(s), metal oxide layer(s), ceramic layer(s), scratch or abrasion resistant surface coating, release liner. Note 2 to entry: The individual l

41、ayers of polymeric film substrate are laminated together to form the final film. 3.2 external film adhesive backed polymeric film designed for installation to glass surfaces that are oriented to the exterior 3.3 internal film adhesive backed polymeric film designed for installation to glass surfaces

42、 that are oriented to the interior 3.4 solar control film adhesive backed polymeric film designed to modify the total solar energy transmittance of a glass substrate, which may include modification of one or more of the following: direct solar transmittance, e, direct solar reflectance, e, direct so

43、lar absorptance, e, visible light transmittance, V, ultra-violet transmittance, UV3.5 safety film adhesive backed polymeric film designed so that, when applied to a glass substrate, the final product can be classified in accordance with EN 12600 to at least 3(B)3 Note 1 to entry: Adhesive backed pol

44、ymeric film designed as a safety film may also be a security film. In this case, the term adhesive backed polymeric safety / security film may be used. 3.6 security film adhesive backed polymeric film designed so that, when applied to a glass substrate, the final product can be classified in accorda

45、nce with one or more of the following: EN 356, EN 1063, EN 13541 and ISO 16933 Note 1 to entry: Adhesive backed polymeric film designed as a security film may also be a safety film. In this case, the term adhesive backed polymeric safety / security film may be used. 3.7 decorative film adhesive back

46、ed polymeric film designed to alter the appearance of a glass substrate 3.8 anti-graffiti film a sacrificial adhesive backed polymeric film designed so that, when applied to a glass substrate, scratching, etching, painting, writing or similar defacing actions of glass surfaces Is reduced 3.9 ultra v

47、iolet reducing films adhesive backed polymeric film designed so that, when applied to a glass substrate, the Ultra Violet transmittance determined in accordance with EN 410 is 0,0010 DIN EN 15752-1:2014-10 EN 15752-1:2014 (E) 9 3.10 lower emissivity film adhesive backed polymeric film designed so th

48、at, when applied to a glass substrate, the normal emissivity, n, of a glass surface is 0,39, when determined in accordance with EN 12898 Note 1 to entry: Adhesive backed polymeric films are available with normal emissivity similar to that of modern low E glass coatings, e.g. n= 0,04. 3.11 privacy film adhesive backed polymeric film designed so that, when applied to a glass substrate, vision through the glass is reduced 3.12 radio frequency interrupter (RFI) / electro-magnetic frequency (EMF) shielding film adhesive ba