DIN EN 1591-2-2008 Flanges and their joints - Design rules for gasketed circular flange connections - Part 2 Gasket parameters English version of DIN EN 1591-2 2008-09《法兰及其接头 带衬垫的圆.pdf

1、September 2008DEUTSCHE NORM English price group 18No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.040.60!$QfD“14667

2、33www.din.deDDIN EN 1591-2Flanges and their joints Design rules for gasketed circular flange connections Part 2: Gasket parametersEnglish version of DIN EN 1591-2:2008-09Flansche und ihre Verbindungen Regeln fr die Auslegung von Flanschverbindungen mit runden Flanschen und Dichtung Teil 2: Dichtungs

3、kennwerteEnglische Fassung DIN EN 1591-2:2008-09SupersedesDIN V ENV 1591-2:2001-10www.beuth.deDocument comprises 50 pagesDIN EN 1591-2:2008-09 2 National foreword This standard has been prepared by Technical Committee CEN/TC 74 “Flanges and their joints” (Secretariat: DIN, Germany). The responsible

4、German body involved in its preparation was the Normenausschuss Rohrleitungen und Dampfkesselanlagen (Piping and Boiler Plant Standards Committee), Technical Committee NA 082-00-16 AA Flansche und ihre Verbindungen. Amendments This standard differs from DIN V ENV 1591-2:2001-10 as follows: The data

5、values given in this European Standard were all determined by the test methods given in EN 13555:2004. The data were obtained during the PERL Project1)during which the test methods of EN 13555 were assessed for practicability and repeatability. The materials selected for evaluation in the PERL Proje

6、ct were those suggested by the organisations taking part. Previous editions DIN V ENV 1591-2: 2001-10 DIN 2505: 1927-01, 1964-10 DIN 2506: 1927-01 DIN 2507: 1927-07 DIN V 2505: 1986-01 1)PERL, Pressure Equipment, Reduction of Leak rate: Gasket parameters measurement, RTD Project in the Framework of

7、the “Competitive QminLor QSminLfigures for 10 bar are marked by a dashed line; QminLor QSminLfigures for 80 bar are underlined; QminLor QSminLfigures for 160 bar are double underlined . DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 7 Table 2 Graphite filled spiral wound gasket with outer ring QminL, QSmi

8、nLfor 40 bar of helium, plus some data for other pressures, at ambient temperature. Code 3-3-100-1, 4,5 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 101- - - - - - - - 10010 30 35 3-3-100-1 - 10 10 10 10 10 10 10 10 10 10 11 10-149 37 57 3-3-100-1 - - 10 43 10 11 10 10 1

9、0 10 12 10-263 62 71 3-3-100-1 - - - 19 25 10 17 10 10 15 10-374 80 87 3-3-100-1 - - - 80 28 32 10 19 28 10-498 126 104 3-3-100-1 - - - - - 24 71 40 10-5- - - - - - - - 10-7- - - - - - - - 10-8- - - - - - - - 10-9- - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 8 Table 3 Graphite filled spir

10、al wound gasket with outer and inner ring QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code 3-4-104-1, 4,5 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 320 - QSminLMPa Material code 101- - - - - - - - 10010 10 10 3-4-104-1 10 10 10 10 10 10 - 10

11、10 10 10-116 32 20 3-4-104-1 - 10 10 10 10 10 - 10 10 10 10-225 48 45 3-4-104-1 - 10 10 10 10 10 - 10 10 10 10-342 81 83 3-4-104-1 - - 16 18 17 10 - 31 10 15 10-481 143 159 3-4-104-1 - - - - 62 35 - 157 26 51 10-5181 281 3-4-104-1 - - - - - - 83 19810-6314 3-4-104-1 - - - - - - 298 10-7- - - - - - -

12、 - 10-8- - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 9 Table 4 Low stress, graphite filled, spiral wound gasket with outer and inner rings QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code 3-5-102-1, 4,5 mm L mg/(sm) QminLMPa QAMPa 20 40

13、60 80 100 160 320 - QSminLMPa Material code 101- - - - - - - - - 10010 - 10 - - - - 10 - - - - 10 10-110 10 12 3-5-102-1 10 10 10 10 10 10 10 10 10 10-210 19 33 3-5-102-1 10 10 10 10 10 10 10 10 10 10-32970 174 3-5-102-1 - - - 10 20 10 14 26 168 10-4140 231 3-5-102-1 - - - - - 82 88 230 10-5154 290

14、3-5-102-1 - - - - - 101 123 288 10-6167 3-5-102-1 - - - - - - 157 10-7180 3-5-102-1 - - - - - - 192 10-8194 3-5-102-1 - - - - - - 258 DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 10 Table 5 PTFE filled spiral wound gasket with outer and inner rings QminL, QSminLfor 40 bar of helium , plus some data for

15、other pressures, at ambient temperature. Code G03, 5,1 mm L mg/(sm) QminLMPa QAMPa 60 120 180 240 300 480 - QSminLMPa Material code 101- - - - - - - - 100- - - - - - - - 10-130 58 G03 30 30 30 30 30 30 30 10-239 74 G03 - 30 30 30 30 30 30 10-352 90 G03 - 30 30 30 30 30 30 10-469 105 G03 - 43 30 30 3

16、0 30 30 10-5101 125 G03 - - 30 30 30 30 30 10-6149 166 G03 - - 97 47 48 35 34 10-7353 428 G03 - - - - - 132 372 10-8- - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 11 Table 6 Corrugated metal core with graphite facing QminL, QSminLfor 40 bar of helium , plus some data for other pressures, a

17、t ambient temperature. Code 7-01-104-1, 3,2 mm Code K04, 2,3 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 320 - QSminLMPa Material code 101- - - - - - - - - 100- - - - - - - - - 10-110 7-01-104-1 10 10 10 10 10 10 10 10 K04 - - - - - - - 10-211 7-01-104-1 10 10 10 10 10 10 17 11 K04 10 10 10 10 1

18、0 10 - 10-317 10 20 7-01-104-1 10 10 10 10 10 10 - 10 24 10 10 22 K04 10 10 10 10 10 10 10 - 10-421 75 30 7-01-104-1 - 33 13 17 27 24 - 20 32 10 14 28 K04 - 10 10 10 10 11 10 10 10-545 104 40 7-01-104-1 - 18 27 46 36 - 28 37 33 41 35 K04 - 25 10 10 10 20 10 10-652 165 95 7-01-104-1 - - 32 36 66 68 -

19、 35 116 74 84 68 K04 - - - 10 10 10 - 10-757 295 152 7-01-104-1 - - - 73 86 159 - 95 165 243 100 80 K04 - - - - 44 10 - 10-8306 7-01-104-1 - - - - - - 305 DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 12 Table 7 Metal jacketed gasket with graphite filler QminL, QSminLfor 40 bar of helium , plus some data

20、 for other pressures, at ambient temperature. Code 6-4-103-1, 3,2 mm No sealing data for H02 L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 320 - QSminLMPa Material code 10134 6-4-103-1 - 10 10 10 10 10 10 20 10055 63 120 6-4-103-1 - - 26 23 21 10 10 20 10-196 187 6-4-103-1 - - - - - 56 14 20 10-2171

21、287 6-4-103-1 - - - - - - 35 40 10-3253 6-4-103-1 - - - - - - 133 10-4- - - - - - - - - 10-5- - - - - - - - - 10-6- - - - - - - - - 10-7- - - - - - - - - 10-8- - - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 13 Table 8 Graphite covered metal jacketed gasket with graphite filler and outer ri

22、ng QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code 5-5-103-1, 4,5 mm Code H01, 4,8 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 320 - QSminLMPa Material code 101- - - - - - - - - 100- - - - - - - - - 10-1- 13 28 5-5-103-1 10 10 10 10 10 10 - 20

23、 10 10 10-214 32 73 5-5-103-1 10 10 10 10 10 10 - 32 10 10 10-310 H01 10 10 10 10 10 10 - 60 69 5-5-103-1 - - - 33 25 24 22 34 10-410 15 H01 10 10 10 10 10 10 - 218 5-5-103-1 - - - - - - 131 10-514 23 H01 - 10 10 10 10 10 - 10-620 33 H01 - 15 10 10 10 10 10 - 10-731 60 H01 - - - 38 32 14 28 - 10-850

24、 - - - - - - - 127 - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 14 Table 9 Graphite sheet with multiple thin metal insertions QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code A01, 2,1 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Mate

25、rial code 101- - - - - - - - 100- - - - - - - - 10-110 A01 10 10 10 10 10 10 10-210 30 A01 - 10 10 10 10 10 10-338 72 A01 - - - 37 17 10 10-483 120 A01 - - - - - 10 38 10-5123 157 A01 - - - - - 52 150 10-6- - - - - - - - 10-7- - - - - - - - 10-8- - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E

26、) 15 Table 10 Graphite sheet with tanged stainless steel core QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code 1-5-101-1, 2 mm Code E02, 2,1 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 101- - - - - - - - 10010 1-5-101-

27、1 10 10 10 10 10 10 10-110 10 E02 10 10 10 10 10 10 10 15 27 1-5-101-1 10 10 10 10 10 10 10 10-228 47 E02 - - 11 10 10 10 23 41 60 1-5-101-1 - - 10 10 10 10 10 10-362 88 E02 - - - - 36 10 49 84 96 1-5-101-1 - - - - 39 10 12 10-494 122 E02 - - - - - 10 29 93 139 1-5-101-1 - - - - - 16 95 10-5124 149

28、E02 - - - - - 33 117 135 200 1-5-101-1 - - - - - 130 - 10-6151 - - - - - - - 125 - 10-7- - - - - - - - 10-8- - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 16 Table 11 Serrated metal core (Kammprofile) with graphite facing QminL, QSminLfor 40 bar of helium , plus some data for other pressures,

29、 at ambient temperature. Code 2-5-104-1, 4 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 320 - QSminLMPa Material code 101- - 29 2-5-104-1 - - - - - - - 10 - 100- 10 37 2-5-104-1 - 10 - 10 - 10 - 10 - 10 - 10 10 - 10 10-110 33 50 2-5-104-1 10 10 30 10 17 10 14 10 10 10 10 23 10 10 10-212 45 62 2-5

30、-104-1 12 16 18 32 14 24 13 23 17 10 43 10 20 10-328 53 69 2-5-104-1 - 27 29 46 22 35 20 33 24 32 62 18 30 10-447 60 76 2-5-104-1 - - 46 31 50 31 46 34 42 82 32 55 10-559 71 101 2-5-104-1 - - - 46 66 43 70 48 59 101 77 97 10-671 83 126 2-5-104-1 - - - 64 73 86 73 76 121 123 125 10-7111 110 138 2-5-1

31、04-1 - - - - - 108 149 141 170 154 10-8138 - 160 2-5-104-1 - - - - - 139 - 160 255 10-9308 2-5-104-1 - - - - - - 316 10-10- - - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 17 Table 12 Modified PTFE QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperatur

32、e. Code 1-10-102-1, 2 mm Code 1-10-100-1, 2 mm Code G02, 2,0 mm Code D01, 2,0 mm Code A02, 2,0 mm Code K02, 2,0 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 101- - - - - - - - 10010 - 1-10-102-1 10 10 10 10 10 10 10 10 - - 10 1-10-100-1 10 10 10 10 10-112 12 19 1-10-102-

33、1 10 10 10 10 10 10 10 10 10 - - 10 10 1-10-100-1 10 10 10 10 10 - - 10 10 G02 10 10 10 10 10 10 10 D01 10 10 10 10 10 10 10 A02 10 10 10 10 10 10 10-217 16 26 1-10-102-1 11 10 10 10 10 10 10 10 10 - - 10 12 22 1-10-100-1 10 10 10 10 10 10 10 10 10 - - 11 25 G02 - 10 10 10 10 10 10 25 D01 - 10 10 10

34、 10 10 11 A02 - 10 10 10 10 10 10-326 21 33 1-10-102-1 - 10 10 10 10 10 10 10 - - 12 17 30 1-10-100-1 10 10 10 10 10 10 10 10 10 - - 27 52 G02 - - 33 13 10 10 22 30 D01 - 10 10 10 10 10 10 15 A02 10 10 10 10 10 10 10 - K02 DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 18 Table 12 (continued) L mg/(sm) Qm

35、inLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 10-438 31 39 1-10-102-1 - 17 10 10 10 10 10 10 - - 17 42 37 1-10-100-1 10 - 10 10 10 10 10 10 - - 58 83 G02 - - - - 27 10 31 36 D01 - 15 10 10 10 10 12 20 A02 14 10 10 10 10 10 13 10 K02 10 10 10 10 10 10 10 10-562 41 1-10-102-1 - - 11 43 10

36、 - - 50 - 1-10-100-1 - - 25 - 10 - - - 94 160 G02 10 - 40 54 D01 - - 33 16 10 10 10 20 58 A02 - - 50 10 11 10 10 17 27 K02 - 16 13 11 10 13 10 10-667 1-10-102-1 - - - 64 - - 40 92 K02 - - - - 83 31 65 10-7- - - - - - - - 10-8- - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 19 Table 13 Non-as

37、bestos, fibre based sheet QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature, Code 1-9-101-1, 2 mm Code G01, 2 mm Code E01, 2,1 mm Code D02, 1,9 mm Code B01, 2 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 10110 1-9-101-1 10 10

38、10 10 10 10 10012 10 1-9-101-1 10 10 10 10 10 10 10 10 10 10 10 10 10-110 10 G01 10 10 10 10 10 10 10 10 E01 10 10 10 10 10 10 10 10 D02 10 10 10 10 10 10 10 10 B01 10 10 10 10 10 10 10 20 22 1-9-101-1 - 10 10 10 10 10 10 10 10 10 10 10 10-222 24 G01 - 10 10 10 10 10 12 48 E01 - - 15 10 10 10 40 64

39、D02 - - - 14 10 10 15 25 B01 - 10 10 10 10 10 16 35 43 1-9-101-1 - 10 10 10 10 10 10 10 10 10 10 10-340 54 G01 - - 19 10 10 10 56 86 E01 - - - - 22 10 77 92 D02 - - - - 34 10 13 32 42 B01 - - 10 10 10 10 33 57 69 1-9-101-1 - - 20 19 15 10 10 10 10 DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 20 Table 13

40、 (continued) L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 10-466 68 G01 - - - 19 10 10 10 84 108 E01 - - - - - 10 15 100 111 D02 - - - - - 17 32 47 54 B01 - - 19 10 10 10 60 81 95 1-9-101-1 - - - 40 33 38 17 19 10-5100 83 G01 - - - - 29 12 14 107 130 E01 - - - - - 18 39 116

41、 134 D02 - - - - - 44 111 60 75 B01 - - - 34 20 10 19 85 112 130 1-9-101-1 - - - - - 33 37 10-6130 111 G01 - - - - - 79 108 129 - E01 52 - 144 - D02 140 - 98 113 B01 92 109 108 151 1-9-101-1 - - - - - 125 10-7- - - - - - - - 10-8 - - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 21 Table 14 P

42、roprietary type of graphite faced Kammprofile with secondary metal to metal seal QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code F01, 4,1 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 320 - QSminLMPa Material code 101- - - - - - - - - 100- - - -

43、 - - - - - 10-1- - - - - - - - - 10-2- - - - - - - - - 10-3- - - - - - - - - 10-4- - - - - - - - - 10-5- - - - - - - - - 10-6- - - - - - - - - 10-734 F01 - - 34 - - - - 10-841 F01 - - 34 - - - - 10-947 F01 - - 34 - - - - 10-1054 F01 - - 45 - - - - 10-1161 F01 - - - - - - - DIN EN 1591-2:2008-09 EN 1

44、591-2:2008 (E) 22 Table 15 Proprietary PTFE/graphite gasket with metal eyelet QminL, QSminLfor 40 bar of helium , plus some data for other pressures, at ambient temperature. Code K01, 1,9 mm L mg/(sm) QminLMPa QAMPa 20 40 60 80 100 160 - QSminLMPa Material code 101- - - - - - - - 100- - - - - - - -

45、10-1- - - - - - - - 10-2- - - - - - - - 10-3- - - - - - - - 10-410 10 K01 10 10 10 10 10 10 10-514 15 K01 - - 37 22 19 10 12 10-628 107 K01 - - - - - 18 56 10-7106 K01 - - - - - 83 10-8- - - - - - - - DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 23 4.3 Qsmaxand PQRQsmaxis the maximum surface pressure th

46、at may be imposed on the gasket at the indicated temperature without collapse or compressive failure of the gasket. PQRis a factor to allow for the effect on the imposed load of the relaxation of the gasket between the completion of bolt up and after long term experience of the service temperature.

47、Table 16 Qsmaxand PQR(EN 13555 based data) Temperature C QSmaxPQR(Qi) for connection stiffness, Qiin MPa, of 500 kN/mm Material code, initial gasket thickness Non-asbestos fibre based sheet 120 1,0 (120) G01, 2,0 mm 120 1,0 (120) E01, 2,1mm 120 1,0 (120) D02, 1,9 mm 120 1,0 (120) B01, 2,0 mm Ambient

48、 150 0,98 (150) 1-9-101-1, 2 mm 175 120 0,9 (120) G01, 2,0 mm 120 0,8 (120) E01, 2,1 mm 80 0,7 (80) D02, 1,9 mm 80 0,8 (80) B01, 2,0 mm 200 60 0,81 (60) 1-9-101-1, 2 mm 250 120 0,9 (120) G01, 2,0 mm 100 0,8 (100) E01, 2,1 mm 80 0,5 (80) D02, 1,9 mm 80 0,6 (80) B01, 2,0 mm 50 0,77 (50) 1-9-101-1, 2 m

49、m Modified PTFE sheet Ambient 60 0,9 (60) 1-10-102-1, 2 mm 50 0,84 (50) 1-10-100-1, 2 mm 120 1,0 (120) G02, 2,0 mm 80 0,9 (80) D01, 2,0 mm 120 0,9 (120) A02, 2,0 mm 40 0,9 (40) K02, 2,0 mm 150 120 1,0 (120) G02, 2,0 mm 40 0,6 (40) D01, 2,0 mm 120 0,6 (120) A02, 2,0 mm 40 0,5 (40) K02, 2,0 mm DIN EN 1591-2:2008-09 EN 1591-2:2008 (E) 24 Table 16 (continued) Temperature C Qsma