DIN EN 1624-1999 Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens G.pdf

1、DEUTSCHE NORM October 1999 Burning behaviour of industrial and technical textiles Procedure to determine the flame spread of vertically oriented specimens Enalish version of DIN EN 1624 DIN EN 1624 - ICs 13.220.40; 59.080.30 Textilien und textile Erzeugnisse - Brennverhalten industrieller und techni

2、scher Textilien - Verfahren zur Bestimmung der Flammenausbreitung vertikal angeordneter Meproben European Standard EN 1624 : 1999 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 248. The responsible German body invo

3、lved in its preparation was the Normenausschu Materialprfung (Mate- rials Testing Standards Committee), Technical Committee Brennverhalten von Textilien. EN comprises 5 pages. No pari of this standard may be reproduced without the prior permission of Ref. No. DIN EN 1624 : 1999-1 V Deutsches Institu

4、t fr Normung e. V., Berlin. uth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen). . . English price group 05 Sales No 1105 04 O0 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1624 August 1999 ICs 13.220.40; 59.080.30 English version Textiles and t

5、extile products Procedure to determine the flame spread of vertically oriented specimens Burning behaviour of industrial and technical textiles Textiles et produits textiles - Com- portement au feu des textiles indu- striels et techniques - Mthode de dtermination de la propagation de la flamme des p

6、rouvettes orientes verticalement Textilien und textile Erzeugnisse - Brennverhalten industrieller und tech- nischer Textilien - Verfahren zur Be- stimmung der Flammenausbreitung vertikal angeordneter Meproben This European Standard was approved by CEN on 1998-01 -1 6. CEN members are bound to comply

7、 with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secret

8、ariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officia

9、l versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. CEN European Committee for Standar

10、dization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, 8-1050 Brussels O 1999. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN 1624 : 1999 E Page 2 EN 1624 : 1999 Foreword

11、This European Standard has been prepared by Technical Committee CEN/TC 248 “Textiles andiextile products:.e-secretaria of .which js held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Feb

12、ruary 2000, and conflicting national standards shall be withdrawn at the latest by February 2000. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark

13、, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 3 EN 1624 : 1999 1 Scope This European Standard specifies a procedure to determine the flame spread of vertically oriented specimens of indu

14、strial and technical textiles, when tested according to EN IS0 6941. 2 Normative references This European Standard incorporates, by dated or undated references, provisions from other publications. -These rtormative references are cited at the appropriate places in the text and the publications are l

15、isted hereafter. For dated references, subsequent amendments or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publications referred to applies. EN IS0 6941 : 1995 Textile

16、fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (IS0 6941 :1984, including Amendment : 1992) 3 Definitions For the purposes of this European Standard the following definitions apply. 3.1 flaming debris: debris is considered to be flaming if, when

17、 separated from the specimen during the test procedure, it is able to ignite the filter paper. 3.2 industrial and technical textiles: any textile which can be used for industrial or technical purposes. NOTE: The definition does not include textiles for general purposes such as curtains, drapes, prot

18、ective clothing, upholstery or bedding. 4 Pretreatment Cleansing may influence the burning behaviour of some industrial and technical textiles by removing non durable finishes or by changing the structure of the material. For the relevant pretreatment procedure, reference should be made to: a) the p

19、roduct performance standard; b) the manufacturers recommended procedure; or c) a procedure agreed between the involved parties. Page 4 EN 1624 : 1999 5 Test specimens Test specimens shall be taken so as to be representative of the submitted material; the number and size of the test specimens require

20、d shall be in accordance with EN IS0 6941. Unless otherwise specified, the test specimen shall not contain any features of construction such as seams, pleats etc. 6 Conditioning Condition the test specimen and the filter paper for at least 24 h in the standard atmosphere of (2012)“C and (65t5)% r.h.

21、 7 Procedure 7.1 Flame spread shall be tested according to EN IS0 6941 using commercial grade propane gas. 7.2 For evaluation of flaming debris, position horizontally, below the test specimen, at a distance of (50 k 10) mm from the lower edge of the specimen, a piece of at least 150 mm x 100 mm of a

22、 filter paper with the following characteristics : - Area specific mass (80 k 20) g/m2, thickness (0,20 f 0,05) mm, content of alpha cellulose 95 %. If the burner could touch the filter paper, a suitable slot shall be cut in each piece of filter paper used. 8 Test report The test report shall includ

23、e the following information : a) reference to this detailed procedure, .e. EN 1624 :1999 ; b) identification of the textile; c) the cleansing procedure if used or a statement that the material is not intended to be cleansed; d) date of test; e) techniques used to attach textiles which cannot be supp

24、orted on the pins; Page 5 EN 1624 : 1999 f) orientation of the burner for igniting the test specimen (face or bottom edge); g) the following times in seconds, for the length and width directions and for each face tested; 1) the flame spread times measured according to 8.9a) and c) of EN IS0 6941:199

25、5; 2) if sixspecimens-are tested, -the mean from the results for all specimens that burn to the respective marker thread and the number of values averaged. Do not report a mean of less than three values: h) the number of specimens that fail to ignite; i) the number of specimens which ignite but fail to burn to the first marker thread; j) the result of the evaluation of flaming debris.