DIN EN 1991-1-5 NA-2010 National Annex - Nationally determined parameters - Eurocode 1 Actions on structures - Part 1-5 General actions - Thermal actions《国家附录 国家制定参数 欧洲规范1 结构作用 第1-.pdf

1、December 2010 Translation by DIN-Sprachendienst.English price group 5No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 91.010.30!$laY“1736254www.din.deDDIN EN 1991-1-5/NANational Annex Nationally determined parameters Eurocode 1: Actions on structures English translation of DIN EN 1991-1-5/NA:2010-12Nationaler Anhang National festgelegte Parameter Eurocode 1: Einwirkungen auf Tragwerke Englische bersetzung von DIN

3、 EN 1991-1-5/NA:2010-12Annexe Nationale Paramtres dtermins au plan national Eurocode 1: Actions sur les structures Traduction anglaise de DIN EN 1991-1-5/NA:2010-12SupersedesDIN EN 1991-1-5/NA:2010-07;together with supersedesDIN 1055-7:2002-11, withdrawn2010-07www.beuth.deDocument comprises 5 pagesI

4、n case of doubt, the German-language original shall be considered authoritative.Part 1-5: General actions Thermal actionsTeil 1-5: Allgemeine Einwirkungen TemperatureinwirkungenDIN EN 1991-1-5:2010-12Partie 1-5: Actions gnrales Actions thermiques02.12 DIN EN 1991-1-5/NA:2010-12 2 Foreword This docum

5、ent has been prepared by Working Committee NA 005-51-02 AA Einwirkungen auf Bauten (Sp CEN/TC 250/SC 1) of the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee). This document is the National Annex to DIN EN 1991-1-5: 2010-12, Eurocode 1: Actions on structures Part 1-5: G

6、eneral actions Thermal actions. European Standard DIN EN 1991-1-5:2010-12 allows national safety parameters, referred to as Nationally Determined Parameters (NDP), to be specified for a number of points. The NDPs cover alternative verification methods, the provision of individual values and the sele

7、ction of classes from designated classification systems. The relevant parts of the text are identified in the European Standard by references to the possibility of national choice and are listed in Clause NA.2.1. This National Annex is an integral part of DIN EN 1991-1-5:2010-12. DIN EN 1991-1-5:201

8、0-12 and this National Annex, DIN EN 1991-1-5/NA:2010-12, supersede DIN 1055-7:2002-11. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. Amendments Th

9、is document differs from DIN 1055-7:2002-11 as follows: a) additional provisions from DIN 1055-7 have been incorporated which are to be taken into account when applying DIN EN 1991-1-5:2010-12 nationally. This document differs from DIN EN 1991-1-5/NA:2010-07 as follows: b) supersedure notes have bee

10、n amended; c) date of publication of DIN EN 1991-1-5 has been changed. Previous editions DIN 1055-7: 2002-11 DIN EN 1991-1-5/NA: 2010-07 DIN EN 1991-1-5/NA:2010-12 3 NA.1 Scope This National Annex contains national provisions relating to the determination of thermal actions on buildings, bridges and

11、 other structures, including individual components, that are to be taken into consideration when applying DIN EN 1991-1-5:2010-12 in Germany. This National Annex is only valid in conjunction with DIN EN 1991-1-5:2010-12. NA.2 National provisions for application of DIN EN 1991-1-5:2010-12 NA.2.1 Gene

12、ral DIN EN 1991-1-5:2010-12 refers to the option of choosing Nationally Determined Parameters (NDPs) in the following places in the text: 5.3(2) (Tables 5.1, 5.2 and 5.3) 6.1.1(1) 6.1.2(2) 6.1.3.1(4), 6.1.3.2(1), 6.1.3.3(3) 6.1.4(3), 6.1.4.1(1), 6.1.4.2(1), 6.1.4.3(1), 6.1.4.4(1) 6.1.5(1) 6.1.6(1) 6

13、.2.1(1)P 6.2.2(1) 6.2.2(2) 7.2.1(1), 7.5(3), 7.5(4) A.1(1), A.1(3), A.2(2) B(1) (Tables B.1, B.2 and B.3) NA.2.2 National provisions NOTE In the following, clauses are numbered as in DIN EN 1991-1-5:2010-12. NDP re 5.3(2) (Tables 5.1, 5.2 and 5.3) The minimum shade air temperature Tminis 24 C and th

14、e maximum shade air temperature Tmaxis +37 C. The recommended values for T1up to T9have been adopted. NDP re 6.1.1(1) The recommended values apply. NDP re 6.1.2(2) Approach 1 is to be applied. DIN EN 1991-1-5/NA:2010-12 4 NDP re 6.1.3.1(4) The recommended values apply. NDP re 6.1.3.2(1) The minimum

15、shade air temperature Tminis 24 C and the maximum shade air temperature Tmaxis +37 C. NDP re 6.1.3.3(3) The recommended values for TN apply. In Table C.1,Tis changed or added for the following materials: Stainless steel 18 106/C Structural steel, wrought or cast iron 10 106/C Concrete, limestone agg

16、regate 9 106/C NDP re 6.1.4(3) No further national provision is applicable. NDP re 6.1.4.1(1) The recommended values apply. NDP re 6.1.4.2(1) The recommended values apply. NDP re 6.1.4.3(1) The recommended values apply. NDP re 6.1.4.4(1) The linear temperature difference shall generally be zero. NDP

17、 re 6.1.5(1) The recommended values apply. NDP re 6.1.6(1) The value for the difference in the uniform temperature component should be 15 K. NDP re 6.2.1(1)P No procedure is given. NDP re 6.2.2(1) The recommended values apply. DIN EN 1991-1-5/NA:2010-12 5 NDP re 6.2.2(2) The recommended values apply

18、. NDP re 7.2.1(1) The minimum shade air temperature Tminis 24 C and the maximum air shade temperature Tmaxis +37 C. NDP re 7.5(3) The recommended values apply. NDP re 7.5(4) The recommended values apply. NDP re A.1(1) (NOTE 1) The minimum air shade temperature Tminis 24 C and the maximum air shade t

19、emperature Tmaxis +37 C. NDP re A.1(1) (NOTE 2) The recommended values apply. NDP re A.1(3) The recommended values apply. NDP re A.2(2) The recommended values apply. NDP re Annex B The application of Annex B (normative) is obligatory in Germany. NDP re B(1) (Tables B.1, B.2 and B.3) The recommended values apply. NDP re Annex C The application of Annex C (normative) is obligatory in Germany.