DIN EN 1993-1-7 NA-2010 National Annex - Nationally determined parameters - Eurocode 3 Design of steel Structures - Part 1-7 Plated structures subject to out of plane loading《国家附录 .pdf

1、December 2010 Translation by DIN-Sprachendienst.English price group 4No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 91.010.30; 91.080.10!$lJ“1735939www.din.deDDIN EN 1993-1-7/NANational Annex Nationally determined parameters Eurocode 3: Design of steel structures Part 1-7: Plated structures subject to out of plane loadingEnglish translation of DIN EN 1993-1-7/NA:2010-12Nationaler Anhang National festgelegte Par

3、ameter Eurocode 3: Bemessung und Konstruktion von Stahlbauten Teil 1-7: PlattenfrmigeBauteile mit QuerbelastungEnglische bersetzung von DIN EN 1993-1-7/NA:2010-12Annexe Nationale Paramtres dtermins au plan national Eurocode 3: Calcul des structures en acier Partie 1-7: Rsistance et stabilit des stru

4、ctures en plaques planescharges hors de leur planTraduction anglaise de DIN EN 1993-1-7/NA:2010-12www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2 02.12 DIN EN 1993-1-7/NA:2010-12 2 Foreword This document has been prepared by Work

5、ing Committee NA 005-08-16 AA Tragwerksbemessung of the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee). This document is the National Annex to DIN EN 1993-1-7:2010-12, Eurocode 3: Design of steel structures Part 1-7: Plated structures subject to out of plane loading. E

6、uropean Standard EN 1993-1-7 allows national safety parameters, referred to as Nationally Determined Parameters (NDPs), to be specified for a number of points. The NDPs cover alternative verification methods, the provision of individual values and the selection of classes from designated classificat

7、ion systems. The relevant parts of the text are identified in the European Standard by references to the possibility of national choice and are listed in Clause NA.2.1. This National Annex is an integral part of DIN EN 1993-1-7:2010-12. NA.1 Scope This National Annex contains national provisions rel

8、ating to supplementary rules for the design of stiffened or unstiffened plates as part of plated structures (e.g. silos and tanks) subjected to out-of-plane loading, which are to be taken into consideration when applying DIN EN 1993-1-7:2010-12 in Germany. This National Annex is only valid in conjun

9、ction with DIN EN 1993-1-7:2010-12. NA.2 National provisions for the application of DIN EN 1993-1-7:2010-12 NA.2.1 General DIN EN 1993-1-7:2010-12 refers to the option of choosing Nationally Determined Parameters (NDPs) at the following places in the text. 6.3.2(4) NA.2.2 National provisions In the following, the clauses are numbered as in DIN EN 1993-1-7:2010-12. NDP re 6.3.2(4) The recommendation applies.