DIN EN 1995-2-2010 Eurocode 5 Design of timber structures - Part 2 Bridges German version EN 1995-2 2004《欧洲法规5 木材结构设计 第2部分 桥梁 德文版本EN 1995-2-2004》.pdf

1、December 2010 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 91.010.30; 91.080.20!$llq“1737378www.din.deDDIN EN 1995-2Eurocode 5: Design of timber structures Part 2: BridgesEnglish translation of DIN EN 1995-2:2010-12Eurocode 5: Bemessung und Konstruktion von Holzbauten Teil 2: BrckenEnglische bersetzung von DIN EN 1995-2:2010-12Eurocode 5: Conception et c

3、alcul des structures en bois Partie 2: PontsTraduction anglaise de DIN EN 1995-2:2010-12SupersedesDIN EN 1995-2:2006-02;partially supersedesDIN 1074:2006-09www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.310 .11 2DIN EN 1995-2:2010

4、-12 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 250 “Structural Eurocodes” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Eng

5、ineering Standards Committee), Working Committee NA 005-04-01 AA Holzbau. EN 1995-2:2004 was approved by CEN on 26 August 2004. This European Standard is part of a series of standards dealing with structural design (Eurocodes) which are intended to be used as a “package”. In Guidance Paper L on the

6、application and use of Eurocodes, issued by the EU Commission, reference is made to transitional periods for the introduction of the Eurocodes in the Member states. The transitional periods are given in the Foreword of this standard. In Germany, this standard is to be applied in conjunction with the

7、 National Annex. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. Amendments This standard differs from DIN V ENV 1995-2:1999-08 as follows

8、: a) the prestandard status has been changed to that of a full standard; b) the comments received from the national member bodies of CEN have been taken into account and the standard has been completely revised; c) the terminology of DIN 1074 2006-09 has been largely adopted Compared with DIN EN 199

9、5-2:2006-02 and DIN 1074:2006-09, the following corrections have been made: a) the standard has been based on European design rules; b) superseding notes have been corrected; c) the standard has been editorially revised. Previous editions DIN 1074: 1930-08, 1941x-08, 1991-05, 2006-09 DIN V ENV 1995-

10、2: 1999-08 DIN EN 1995-2: 2006-02 :EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1995-2 November 2004 ICS 91.010.30; 91.080.20; 93.040 Supersedes ENV 1995-2:1997English version Eurocode 5: Design of timber structures Part 2: Bridges Eurocode 5: Conception et calcul des structures en bois Part

11、ie 2: Ponts Eurocode 5: Bemessung und Konstruktion von Holzbauten Teil 2: Brcken This European Standard was approved by CEN on 26 August 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a na

12、tional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in

13、any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Fin

14、land, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F

15、R NORMUNG Management Centre: Avenue Marni 17, B-10 0 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1995-2:2004: Ex 0Contents Foreword 3 Section 1 General 6 1.1 Scope 6 1.1.1 Scope of EN 1990 6 1.1.2 Scope of EN 1995

16、-2 6 1.2 Normative references 6 1.3 Assumptions 7 1.4 Distinction between principles and application rules 7 1.5 Definitions 7 1.5.1 General 7 1.5.2 Additional terms and definitions used in this present standard 7 1.6 Symbols used in EN 1995-2 9 Section 2 Basis of design 11 2.1 Basic requirements 11

17、 2.2 Principles of limit state design 11 2.3 Basic variables 11 2.3.1 Actions and environmental influences 11 2.4 Verification by the partial factor method 11 2.4.1 Design value of material property 11 Section 3 Material properties 13 Section 4 Durability 14 4.1 Timber 14 4.2 Resistance to corrosion

18、 14 4.3 Protection of timber decks from water by sealing 14 Section 5 Basis of structural analysis 15 5.1 Laminated deck plates 15 5.1.1 General 15 5.1.2 Concentrated vertical loads 15 5.1.3 Simplified analysis 16 5.2 Composite members 17 5.3 Timber-concrete composite members 17 Section 6 Ultimate l

19、imit states 18 6.1 Deck plates 18 6.1.1 System strength 18 6.1.2 Stress-laminated deck plates 19 6.2 Fatigue 21 Section 7 Serviceability limit states 22 7.1 General 22 7.2 Limiting values for deflections 22 7.3 Vibrations 22 7.3.1 Vibrations caused by pedestrians 22 7.3.2 Vibrations caused by wind 2

20、2 Section 8 Connections 23 8.1 General 23 8.2 Timber-concrete connections in composite beams 23 8.2.1 Laterally loaded dowel-type fasteners 23 8.2.2 Grooved connections 23 Section 9 Structural detailing and control 24 Annex A (informative) Fatigue verification 25 A.1 General 25 A.2 Fatigue loading 2

21、5 A.3 Fatigue verification 26 Annex B (informative) Vibrations caused by pedestrians 28 B.1 General 28 B.2 Vertical vibrations 28 B.3 Horizontal vibrations 28 DIN EN 1995-2:2010-12 EN 1995-2:2004 (E) 2 Foreword This European Standard EN 1995-2 has been prepared by Technical Committee CEN/TC250 “Stru

22、ctural Eurocodes”, the Secretariat of which is held by BSI. This European Standard shall be given the status of a National Standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by March 2

23、010. This European Standard supersedes ENV 1995-2:1997. CEN/TC250 is responsible for all Structural Eurocodes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, C

24、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemburg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Background of the Eurocode programme In 1975, the Commis

25、sion of the European Community decided on an action programme in the field of construction, based on article 95 of the Treaty. The objective of the programme was the elimination of technical obstacles to trade and the harmonisation of technical specifications. Within this action programme, the Commi

26、ssion took the initiative to establish a set of harmonised technical rules for the design of construction works which, in a first stage, would serve as an alternative to the national rules in force in the Member States and, ultimately, would replace them. For fifteen years, the Commission, with the

27、help of a Steering Committee with Representatives of Member States, conducted the development of the Eurocodes programme, which led to the first generation of European codes in the 1980s. In 1989, the Commission and the Member States of the EU and EFTA decided, on the basis of an agreement1between t

28、he Commission and CEN, to transfer the preparation and the publication of the Eurocodes to CEN through a series of Mandates, in order to provide them with a future status of European Standard (EN). This links de facto the Eurocodes with the provisions of all the Councils Directives and/or Commission

29、s Decisions dealing with European standards (e.g. the Council Directive 89/106/EEC on construction products CPD and Council Directives 93/37/EEC, 92/50/EEC and 89/440/EEC on public works and services and equivalent EFTA Directives initiated in pursuit of setting up the internal market). The Structur

30、al Eurocode programme comprises the following standards, generally consisting of a number of Parts: EN 1990:2002 Eurocode: Basis of Structural Design EN 1991 Eurocode 1: Actions on structures EN 1992 Eurocode 2: Design of concrete structures EN 1993 Eurocode 3: Design of steel structures EN 1994 Eur

31、ocode 4: Design of composite steel and concrete structures EN 1995 Eurocode 5: Design of timber structures EN 1996 Eurocode 6: Design of masonry structures EN 1997 Eurocode 7: Geotechnical design 1Agreement between the Commission of the European Communities and the European Committee for Standardisa

32、tion (CEN) concerning the work on EUROCODES for the design of building and civil engineering works (BC/CEN/03/89). DIN EN 1995-2:2010-12 EN 1995-2:2004 (E) 3 EN 1998 Eurocode 8: Design of structures for earthquake resistance EN 1999 Eurocode 9: Design of aluminium structures Eurocode standards recog

33、nise the responsibility of regulatory authorities in each Member State and have safeguarded their right to determine values related to regulatory safety matters at national level where these continue to vary from State to State. Status and field of application of Eurocodes The Member States of the E

34、U and EFTA recognise that Eurocodes serve as reference documents for the following purposes: as a means to prove compliance of building and civil engineering works with the essential requirements of Council Directive 89/106/EEC, particularly Essential Requirement N1 Mechanical resistance and stabili

35、ty and Essential Requirement N2 Safety in case of fire; as a basis for specifying contracts for construction works and related engineering services ; as a framework for drawing up harmonised technical specifications for construction products (ENs and ETAs) The Eurocodes, as far as they concern the c

36、onstruction works themselves, have a direct relationship with the Interpretative Documents2referred to in Article 12 of the CPD, although they are of a different nature from harmonised product standards3. Therefore, technical aspects arising from the Eurocodes work need to be adequately considered b

37、y CEN Technical Committees and/or EOTA Working Groups working on product standards with a view to achieving full compatibility of these technical specifications with the Eurocodes. The Eurocode standards provide common structural design rules for everyday use for the design of whole structures and c

38、omponent products of both a traditional and an innovative nature. Unusual forms of construction or design conditions are not specifically covered and additional expert consideration will be required by the designer in such cases. National Standards implementing Eurocodes The National Standards imple

39、menting Eurocodes will comprise the full text of the Eurocode (including any annexes), as published by CEN, which may be preceded by a National title page and National foreword, and may be followed by a National annex. The National annex may only contain information on those parameters which are lef

40、t open in the Eurocode for national choice, known as Nationally Determined Parameters, to be used for the design of buildings and civil engineering works to be constructed in the country concerned, i.e.: values and/or classes where alternatives are given in the Eurocode; values to be used where a sy

41、mbol only is given in the Eurocode; country specific data (geographical, climatic, etc.), e.g. snow map; the procedure to be used where alternative procedures are given in the Eurocode; 2According to Art. 3.3 of the CPD, the essential requirements (ERs) shall be given concrete form in interpretative

42、 documents for the creation of the necessary links between the essential requirements and the mandates for harmonised ENs and ETAGs/ETAs. 3According to Art. 12 of the CPD the interpretative documents shall : give concrete form to the essential requirements by harmonising the terminology and the tech

43、nical bases and indicating classes or levels for each requirement where necessary ; indicate methods of correlating these classes or levels of requirement with the technical specifications, e.g. methods of calculation and of proof, technical rules for project design, etc. ; serve as a reference for

44、the establishment of harmonised standards and guidelines for European technical approvals. The Eurocodes, de facto, play a similar role in the field of the ER 1 and a part of ER 2. DIN EN 1995-2:2010-12 EN 1995-2:2004 (E) 4 decisions on the application of informative annexes; references to non-contr

45、adictory complementary information to assist the user to apply the Eurocode. Links between Eurocodes and harmonised technical specifications (ENs and ETAs) for products There is a need for consistency between the harmonised technical specifications for construction products and the technical rules f

46、or works4. Furthermore, all the information accompanying the CE Marking of the construction products which refer to Eurocodes shall clearly mention which Nationally Determined Parameters have been taken into account. Additional information specific to EN 1995-2 EN 1995 describes the Principles and r

47、equirements for safety, serviceability and durability of timber bridges. It is based on the limit state concept used in conjunction with a partial factor method. For the design of new structures, EN 1995-2 is intended to be used, for direct application, together with EN 1995-1-1 and EN1990:2002 and

48、relevant Parts of EN 1991. Numerical values for partial factors and other reliability parameters are recommended as basic values that provide an acceptable level of reliability. They have been selected assuming that an appropriate level of workmanship and of quality management applies. When EN 1995-

49、2 is used as a base document by other CEN/TCs the same values need to be taken. National annex for EN 1995-2 This standard gives alternative procedures, values and recommendations with notes indicating where national choices may have to be made. Therefore the National Standard implementing EN 1995-2 should have a National annex containing all Nationally Determined Parameters to be used for the design of bridges to be constructed in the relevant country. National choice is allowed in EN 1995-2 through clauses: 2.3.1.2(1) Load-duration a