DIN EN 295-4-2013 Vitrified clay pipe systems for drains and sewers - Part 4 Requirements for adaptors connectors and flexible couplings German version EN 295-4 2013《排水和污水用陶土管道系统 第.pdf

1、May 2013 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93

2、.030!%$*“2010761www.din.deDDIN EN 295-4Vitrified clay pipe systems for drains and sewers Part 4: Requirements for adaptors, connectors and flexible couplings;English version EN 295-4:2013,English translation of DIN EN 295-4:2013-05Steinzeugrohrsysteme fr Abwasserleitungen und -knale Teil 4: Anforder

3、ungen an bergangs- und Anschlussbauteile und flexible Kupplungen;Englische Fassung EN 295-4:2013,Englische bersetzung von DIN EN 295-4:2013-05Systmes de tuyaux en grs vitrifi pour les collecteurs dassainissement et lesbranchements Partie 4: Exigences applicables aux adaptateurs, raccords et assembla

4、ges souples;Version anglaise EN 295-4:2013,Traduction anglaise de DIN EN 295-4:2013-05Supersedes DIN EN 295-4:1995-05;together with DIN EN 295-1:2013-05, DIN EN 295-2:2013-05, DIN EN 295-5:2013-05, DIN EN 295-6:2013-05and DIN EN 295-7:2013-05 supersedes DIN EN 295-10:2005-05Supersedes: see belowwww.

5、beuth.deDocument comprises 33 pagesIn case of doubt, the German-language original shall be considered authoritative.04.13DIN EN 295-4:2013-05 2 A comma is used as the decimal marker. Start of application It should be noted that, in Germany, CE conformity marking of construction products will be perm

6、itted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant buildi

7、ng authority. National foreword This document (EN 295-4:2013) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering” (Secretariat: DIN, Germany). The preliminary work was done by Working Group WG 2 “Vitrified clay pipes”. The responsible German body involved in its preparation

8、 was the Normenausschuss Wasserwesen (Water Practice Standards Committee), Working Committee NA 119-05-07 AA Steinzeugrohre. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 3302-1 DIN ISO 3302-1 Amendments This standard differs from DIN EN

9、 295-4:1995-05 and DIN EN 295-10:2005-05 as follows: a) requirements for the reaction to fire have been added; b) Annex ZA has been added; c) the standard has been editorially revised and brought in line with the current rules of presentation. Previous editions DIN 1203 to DIN 1206: 1926-01 DIN 1230

10、: 1938-07, 1941-04, 1943-09 DIN 1230-1: 1957x-08, 1962-06, 1972-01, 1979-09, 1986-01, 1992-02 DIN 1230-2: 1958-02, 1962-07, 1972-01, 1979-09, 1986-01 DIN 1230-3: 1974-07, 1980-01 DIN 1230-4: 1975-12 DIN 1230-6: 1983-08, 1992-02 DIN EN 295-4: 1995-05 DIN EN 295-10: 2005-05 DIN EN 295-4:2013-05 3 Nati

11、onal Annex NA (informative) Bibliography DIN ISO 3302-1, Rubber Tolerances for products Part 1: Dimensional tolerances DIN EN 295-4:2013-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 295-4 February 2013 ICS 93.030 Supersedes EN 295-10:2005, EN 295-4:1995E

12、nglish Version Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings Systmes de tuyaux en grs vitrifi pour les collecteurs dassainissement et les branchements - Partie 4: Exigences applicables aux adaptateurs, raccords et assemblages

13、 souples Steinzeugrohrsysteme fr Abwasserleitungen und -knale -Teil 4: Anforderungen an bergangs- und Anschlussbauteile und flexible Kupplungen This European Standard was approved by CEN on 1 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

14、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard

15、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national

16、 standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki

17、a, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worl

18、dwide for CEN national Members. Ref. No. EN 295-4:2013: EEN 295-4:2013 (E) 2 Contents Page Foreword . 4 1 Scope 5 2 Normative references . 5 3 Terms and definitions 6 4 Symbols and abbreviations . 6 5 Requirements for adaptors, connectors and flexible couplings 6 5.1 Materials, manufacture, water ab

19、sorption and appearance . 6 5.1.1 Vitrified clay 6 5.1.2 Rubber sealing materials . 6 5.1.3 Polyurethane sealing materials . 7 5.1.4 Other materials . 7 5.1.5 Manufacture 7 5.2 Internal diameter 7 5.3 Length . 7 5.4 Angles . 7 5.5 Squareness of ends and joint interchangeability . 7 5.6 Bond strength

20、 of adhesive for fixing fired vitrified clay parts together . 7 5.7 Tightness 7 5.8 Chemical resistance . 7 5.8.1 Vitrified clay 7 5.8.2 Other materials . 8 5.9 Requirements for joint assemblies 8 5.9.1 Vitrified clay pipeline systems . 8 5.9.2 Vitrified clay pipelines to other materials 8 5.9.3 Met

21、al banded flexible couplings and adaptors . 8 5.9.4 Connectors, insertable fittings and sealing rings . 8 5.9.5 Heatshrinkable sleeves 8 6 Common requirements for adaptors, connectors and flexible couplings . 8 6.1 Reaction to fire . 8 6.2 Durability 9 6.3 Dangerous substances 9 7 Designation 9 8 Ma

22、rking . 10 9 Evaluation of conformity 10 9.1 General . 10 9.2 Initial type testing . 10 9.3 Factory production control (FPC) 10 Annex A (normative) Metal banded flexible couplings and adaptors 11 A.1 General . 11 A.2 Types of metal banded flexible couplings and adaptors 11 A.2.1 Type 1 couplings (wi

23、thout shear bands) . 11 A.2.2 Type 2 couplings (with shear bands) 11 A.2.3 Metal banded adaptors 12 A.2.4 Bushes 12 A.3 Requirements . 12 A.3.1 Materials . 12 A.3.2 Dimensions and tolerances . 13 A.3.3 Performance requirements 14 DIN EN 295-4:2013-05 EN 295-4:2013 (E) 3 A.3.4 Testing 14 Annex B (nor

24、mative) Connectors, insertable fittings and sealing rings 16 B.1 General . 16 B.2 Connectors . 16 B.3 Insertable fittings . 16 B.4 Sealing rings for cut pipes . 17 B.5 Performance requirements 17 Annex C (normative) Heatshrinkable sleeves 18 C.1 General . 18 C.2 Materials and manufacture 18 C.3 Dime

25、nsions . 19 C.4 Performance requirements 19 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 20 ZA.1 Scope and relevant characteristics . 20 ZA.2 Procedures for the attestation of conformity of adaptors, connectors and fle

26、xible couplings 24 ZA.2.1 System of attestation of conformity 24 ZA.2.2 EC declaration of conformity . 25 ZA.3 CE marking and labelling . 26 ZA.3.1 General . 26 ZA.3.2 CE marking on the product 26 ZA.3.3 CE marking on the accompanying documents . 27 Bibliography 29 DIN EN 295-4:2013-05 EN 295-4:2013

27、 (E) 4 Foreword This document (EN 295-4:2013) has been prepared by Technical Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

28、at the latest by August 2013, and conflicting national standards shall be withdrawn at the latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any

29、 or all such patent rights. This document supersedes EN 295-4:1995 and together with EN 295-1:2013, EN 295-2:2013, EN 295-5:2013, EN 295-6:2013 and EN 295-7:2013 it supersedes EN 295-10:2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Fre

30、e Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main changes with respect to the previous version are listed below: reaction to fire added; Annex ZA added. Th

31、e standard series EN 295 “Vitrified clay pipe systems for drains and sewers“ consists of the following parts: Part 1: Requirements for pipes, fittings and joints Part 2: Evaluation of conformity and sampling Part 3: Test methods Part 4: Requirements for adaptors, connectors and flexible couplings (t

32、he present document) Part 5: Requirements for perforated pipes and fittings Part 6: Requirements for components of manholes and inspection chambers Part 7: Requirements for pipes and joints for pipe jacking According to the CEN/CENELEC Internal Regulations, the national standards organisations of th

33、e following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl

34、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 295-4:2013-05 EN 295-4:2013 (E) 5 1 Scope This European Standard specifies requirements for adaptors and connectors made from vitrified clay and/or other suitable materials

35、for use with vitrified clay pipes and fittings for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. Adaptors and connectors include ins

36、ertable fittings, sealing rings for cut pipes and heat-shrinkable sleeves. This standard also applies for metal banded flexible couplings and adaptors and specifies requirements for rubber, polyurethane, stainless steel and other components used for them. NOTE 1 The specifiers/purchasers can select

37、adaptors, connectors and flexible couplings according to their requirements. NOTE 2 Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively. 2 Normative references The following d

38、ocuments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 295-1:2013, Vitrifi

39、ed clay pipe systems for drains and sewers Part 1: Requirements for pipes, fittings and joints EN 295-2:2013, Vitrified clay pipe systems for drains and sewers Part 2: Evaluation of conformity and sampling EN 295-3:2012, Vitrified clay pipe systems for drains and sewers Part 3: Test methods EN 295-5

40、:2013, Vitrified clay pipe systems for drains and sewers Part 5: Requirements for perforated pipes and fittings EN 295-6:2013, Vitrified clay pipes systems for drain and sewers Part 6: Requirements for components of manholes and inspection chambers EN 295-7:2013, Vitrified clay pipe systems for drai

41、ns and sewers Part 7: Requirements for pipes and joints for pipe jacking EN 681-1, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber EN 681-4, Elastomeric seals Materials requirements for pipe joint seals used in water and

42、 drainage applications Part 4: Cast polyurethane sealing elements EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 10088-2:2005, Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purp

43、oses EN ISO 527-1, Plastics Determination of tensile properties Part 1: General principles (ISO 527-1)EN ISO 527-2, Plastics Determination of tensile properties Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2) DIN EN 295-4:2013-05 EN 295-4:2013 (E) 6 EN ISO 868, Plastics and e

44、bonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868) EN ISO 1183-1, Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1) EN ISO 9445-1:2010, Continuously c

45、old-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) ISO 3302-1:1996, Rubber Tolerances for products Part 1: Dimensional tolerances ISO 4587, Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies3 Term

46、s and definitions For the purposes of this document, the following terms and definitions apply. 3.1 adaptors special items, made from vitrified clay and/or other suitable materials, to join together vitrified clay pipes and fittings of different jointing systems or to join them to items of other pip

47、eline materials 3.2 connectors any special item made from vitrified clay and/or other suitable materials for making connections to existing pipe systems, manholes, inspection chambers and building works 3.3 metal banded flexible couplings and adaptors rubber sleeves, with or without rubber bushes or

48、 shear bands, with adjustable stainless steel tension bands by which they are secured to the pipe ends 4 Symbols and abbreviations d1 pipe inside diameter (mm) d3 spigot outside diameter (mm) d4internal diameter of socket or fairing (mm) l2manufacturers stated outside barrel length (mm) OD outside d

49、iameter 5 Requirements for adaptors, connectors and flexible couplings 5.1 Materials, manufacture, water absorption and appearance 5.1.1 Vitrified clay For material, manufacture, water absorption and appearance, all vitrified clay elements of adaptors and connectors shall comply with EN 295-1:2013, 5.1. 5.1.2 Rubber sealing materials Rubber sealing materials shall comply with EN 681-1. DIN EN 295-4:2013-05 EN 295-4:2013 (E) 7 5.1.3 Polyurethane sealing materials Polyurethane sealing