DIN EN 438-5-2016 en 8755 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5 Classification and specifications for .pdf

1、June 2016 English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 83.140.20!%Vux“2518285www.din.deDIN

2、EN 438-5High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (usually called laminates) Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates;English version EN 438-5:2016,English translation

3、 of DIN EN 438-5:2016-06Dekorative Hochdruck-Schichtpressstoffplatten (HPL) Platten auf Basis hrtbarer Harze (Schichtpressstoffe) Teil 5: Klassifizierung und Spezifikationen fr Schichtpressstoffe fr Fubden mit einer Dicke kleiner als 2 mm, vorgesehen zum Verkleben auf ein Trgermaterial;Englische Fas

4、sung EN 438-5:2016,Englische bersetzung von DIN EN 438-5:2016-06Stratifis dcoratifs haute pression (HPL) Plaques base de rsines thermodurcissables (communment appeles stratifs) Partie 5: Classification et spcifications des stratifis pour revtement de sols dpaisseur infrieure 2 mm destins tre colls s

5、ur des supports;Version anglaise EN 438-5:2016,Traduction anglaise de DIN EN 438-5:2016-06SupersedesDIN EN 438-5:2005-04www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 12 pages 06.16i2 A comma is used

6、as the decimal marker. National foreword This document (EN 438-5:2016) has been prepared by Technical Committee CEN/TC 249 “Plastics” (Secretariat: NBN, Belgium). The responsible German body involved in its preparation was DIN-Normenausschuss Kunststoffe (DIN Standards Committee Plastics), Working C

7、ommittee NA 054-04-01 AA Dekorative Schichtstoffe und Mineral-werkstoffe. Amendments This standard differs from DIN EN 438-5:2005-04 as follows: a) new terms and definitions have been included and existing terms and definitions have been amended; b) the normative reference to the classification syst

8、em has been changed from EN 685 to EN ISO 10874; c) in Table 1, the range of levels of use has been extended to include “very heavy commercial”; d) Subclause 5.2.3 “Surface finish” has been clarified as regards the gloss value; e) in Table 2 “Dimensional tolerance requirements”, amendments have been

9、 made to properties and requirements; f) Tables 3 “General requirements” and 4 “Supplemental properties and test methods” have been amended and supplemented; g) Subclause 5.4.2 “Notes on requirements for reaction to fire” has been supplemented; h) a new Subclause 5.5 “Supplemental properties” has be

10、en included; i) Annex A “Addendum relating to electrostatic properties” has been deleted; j) the standard has been editorially revised. Previous editions DIN 16926: 1960-09, 1968-07, 1975-05, 1986-01, 1987-10 DIN 53799: 1960-09, 1968-07, 1975-05, 1986-01 DIN 68751: 1964-07, 1968-07, 1976-03, 1987-11

11、 DIN EN 438-1: 1992-02, 1992-12 DIN EN 438-2: 1992-02 DIN EN 438-5: 2005-04 DIN EN 438-5:2016-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 438-5 February 2016 ICS 83.140.20 Supersedes EN 438-5:2005English Version High-pressure decorative laminates (HPL) - Sheets based on thermosetting res

12、ins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates Stratifis dcoratifs haute pression (HPL) - Plaques base de rsines thermodurcissables (communment appeles stratifis) - Partie 5: C

13、lassification et spcifications des stratifis pour revtement de sols dpaisseur infrieure 2 mm destins tre colls sur des supports Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis hrtbarer Harze (Schichtpressstoffe) -Teil 5: Klassifizierung und Spezifikationen fr Schichtpressstof

14、fe fr Fubden mit einer Dicke kleiner 2 mm, vorgesehen zum Verkleben auf ein Trgermaterial This European Standard was approved by CEN on 13 December 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta

15、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, G

16、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croa

17、tia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUn

18、ited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E

19、N 438-5:2016 EEN 438-5:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions, symbols and abbreviations 5 3.1 Terms and definitions 5 3.2 Symbols . 5 4 Classification system 5 5 Requirements . 6 5.1 Compliance . 6 5.2 Inspection requirements 6 5.2.

20、1 General 6 5.2.2 Colour and pattern . 6 5.2.3 Surface finish 6 5.2.4 Reverse side 7 5.2.5 Visual inspection . 7 5.3 Dimensional tolerance requirements . 7 5.4 Test requirements . 8 5.4.1 General requirements . 8 5.4.2 Notes on requirements for reaction to fire . 10 5.5 Supplemental properties . 10

21、DIN EN 438-5:2016-06 EN 438-5:2016 (E) 3 European foreword This document (EN 438-5:2016) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an ident

22、ical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held re

23、sponsible for identifying any or all such patent rights. This document supersedes EN 438-5:2005. EN 438, High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (usually called laminates), consists of the following parts: Part 1: Introduction and general information Part 2: Det

24、ermination of properties Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater Part 5: Classification and specifications for flooring gra

25、de laminates less than 2 mm thick intended for bonding to supporting substrates Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes Part 8: C

26、lassification and specifications for design laminates Part 9: Classification and specifications for alternative core laminates According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Be

27、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit

28、zerland, Turkey and the United Kingdom. DIN EN 438-5:2016-06 EN 438-5:2016 (E) 4 1 Scope This European Standard applies to six classes of flooring grade laminates less than 2 mm thick produced by using a high pressure process, intended for bonding to supporting substrates, to produce HPL flooring el

29、ements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329. High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properti

30、es and are easy to clean and maintain. The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product. This European Standard applies only to decorative lam

31、inates as defined in Clause 3. EN 438-2 specifies the methods of test relevant to this European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition

32、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 316, Wood fibre boards Definition, classification and symbols EN 438-2:2016, High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (usually called lami

33、nates) Part 2: Determination of properties EN 12721, Furniture Assessment of surface resistance to wet heat EN 13329, Laminate floor coverings Elements with a surface layer based on aminoplastic thermosetting resins Specifications, requirements and test methods EN 13501-1, Fire classification of con

34、struction products and building elements Part 1: Classification using data from reaction to fire tests EN 13722, Furniture Assessment of the surface gloss EN 16094, Laminate floor coverings Test method for the determination of micro-scratch resistance EN 61340-4-1, Electrostatics Part 4-1: Standard

35、test methods for specific applications Electrical resistance of floor coverings and installed floors (IEC 61340-4-1) EN ISO 1183-1, Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1) EN ISO 9239-1

36、, Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1) EN ISO 10874, Resilient, textile and laminate floor coverings Classification (ISO 10874) EN ISO 11664-2, Colorimetry Part 2: CIE standard illuminants (ISO 11664-2) EN ISO 11

37、925-2, Reaction to fire tests - Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) DIN EN 438-5:2016-06 EN 438-5:2016 (E) 5 3 Terms and definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, th

38、e following terms and definitions apply. 3.1.1 high-pressure decorative laminate(s) HPL sheet(s) consisting of decorative surface layer(s) and core layers bonded together by an high pressure process Note 1 to entry: Typical values for the high pressure process are a temperature of 120 C and a pressu

39、re of 5 MPa. 3.1.2 surface layer upper decorative layer consisting in one or more sheets of fibrous material (usually paper) impregnated with aminoplastic thermosetting resins (usually melamine based resins) Note 1 to entry: The surface layer(s) on one side, having decorative colours or designs, are

40、 impregnated typically with melamine based resins and may contain special surface additives to improve abrasion resistance. Note 2 to entry: The back of the sheet(s) is made suitable for adhesive bonding to a substrate. 3.1.3 core layer fibrous material (usually paper) impregnated with thermosetting

41、 resins (usually phenolic based resins) 3.2 Symbols For the purpose of this document, the following symbol applies. t nominal thickness 4 Classification system The classification system makes reference to EN ISO 10874 (level of use) in combination with the abrasion class (AC) given by a numerical ra

42、ting of 1 to 6 defining the level of abrasion resistance, 6 being the highest and 1 the lowest performance. Table 1 shows how the six abrasion classes of flooring grade laminate relate to level of use and some examples of typical applications. Flooring grade laminates are specified according to abra

43、sion class e.g. HPL/EN 438-5/AC1. DIN EN 438-5:2016-06 EN 438-5:2016 (E) 6 Table 1 Classification system and typical applications EN ISO 10874 classification Level of use Description Examples of applications Abrasion class 21 Moderate domestic Residential areas with low or intermittent use Bedrooms

44、AC1 22 General domestic Residential areas with medium use Living rooms, entrance halls AC2 23 Heavy domestic Residential areas with intense use Living rooms, entrance halls AC3 31 Moderate commercial Commercial areas with low or intermittent use Hotel rooms, small offices, hotels boutiques 32 Genera

45、l commercial Commercial areas with medium use Classrooms, small offices, hotel boutiques AC4 33 Heavy commercial Commercial areas with heavy use Corridors, department stores, schools, multipurpose halls, open plan offices AC5 34 Very heavy commercial Commercial areas with very heavy use Airports, mu

46、lti-purpose halls, counter halls, department stores AC6 5 Requirements 5.1 Compliance Laminates classified in Table 1 shall meet all appropriate requirements specified in 5.2, 5.3, and 5.4. This applies to both full-size sheets and cut-to-size panels. 5.2 Inspection requirements 5.2.1 General Inspec

47、tion shall be carried out in accordance with EN 438-2:2016, Clause 4 at a distance of 1,5 m. 5.2.2 Colour and pattern When inspected in daylight or D65 standard illuminant, as specified in EN ISO 11664-2, and also under tungsten filament lightning illuminant A as specified in EN ISO 11664-2, a sligh

48、t difference between the corresponding colour reference sample held by the supplier and the specimen under test is acceptable. NOTE Where colour and surface finish are critical, it is advised that sheets be checked for colour and surface-finish compatibility before fabrication or installation. 5.2.3

49、 Surface finish When inspected at different viewing angles, there shall be no significant difference between the corresponding surface-finish reference sample held by the supplier and the specimen under test. The maximum permitted deviations for the gloss value determined according to EN 13722 are: Gloss surface 70 GU maximum deviation 15 GU Semi Gloss surface 30 70 GU maximum deviation 10 GU DIN EN 438-5:2016-06 EN 438-5:2016 (E) 7 Semi Matt surface 1