1、Oktober 2007DEUTSCHE NORM Normenausschuss Luft- und Raumfahrt (NL) im DINPreisgruppe 12DIN Deutsches Institut fr Normung e.V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e.V., Berlin, gestattet.ICS 49.025.10!,z6*“9871907www.din.deDDIN EN
2、 4470Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 Berlinwww.beuth.deGesamtumfang 14 SeitenLuft- und Raumfahrt Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen Lsungsgeglht und ausgehrtet Schmiedestcke a oder D 150 mm Rm 1
3、200 MPa; Deutsche und Englische Fassung EN 4470:2007 Aerospace series Steel FE-PM1505 (X1CrNiMoAITi12-9-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation hardened Forgings a or D 150 mm Rm 1 200 MPa; German and English version EN 4470:2007 Srie arospatia
4、le Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) labor sous vide par induction et refondu llectrode consommable Mis en solution et vieilli Pices forges et pices matrices a ou D 150 mm Rm 1 200 MPa; Version allemande et anglaise EN 4470:2007 DIN EN 4470:2007-10 2 Nationales Vorwort Die Europische Vereinigung
5、der Hersteller von Luft- und Raumfahrtgert (ASD-STAN) ist vom Europischen Komitee fr Normung (CEN) fr zustndig erklrt worden, Europische Normen (EN) fr das Gebiet der Luft- und Raumfahrt auszuarbeiten. Durch die Vereinbarung vom 3. Oktober 1986 wurde ASD Assoziierte Organisation (ASB) des CEN. Die v
6、orliegende Norm EN 4470:2007 wurde von ASD-STAN, Fachbereich Metallische Werkstoffe, unter Mitwirkung deutscher Experten des Normenausschusses Luft- und Raumfahrt erarbeitet. Entsprechend Beschluss 57/9 des Technischen Ausschusses des Beirats des Normenausschusses Luft- und Raumfahrt (NL) im DIN Deu
7、tsches Institut fr Normung e. V. sind die europischen Luft- und Raumfahrt-Normungsergebnisse zweisprachig, in Deutsch und Englisch, in das Deutsche Normenwerk zu berfhren. Aus diesem Grund wurde der Deutschen Fassung dieser EN-Norm die Englische Fassung hinzugefgt. EUROPISCHE NORM EUROPEAN STANDARD
8、NORME EUROPENNE Juli 2007 ICS 49.025.10 Deutsche Fassung Luft- und Raumfahrt Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen Lsungsgeglht und ausgehrtet Schmiedestcke a oder D 150 mm Rm 1 200 MPa Aerospace series Steel FE-PM1505 (X1
9、CrNiMoAlTi12-9-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Forgings a or D 150 mm Rm 1 200 MPa Srie arospatiale Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) labor sous vide par induction et refondu llectrode consommable Mis en solution et vieilli P
10、ices forges et pices matrices a ou D 150 mm Rm 1 200 MPa Diese Europische Norm wurde vom CEN am 15. Februar 2007 angenommen. Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschftsordnung zu erfllen, in der die Bedingungen festgelegt sind, unter denendieser Europischen Norm ohne jede nderung der
11、Status einer nationalen Norm zu geben ist. Auf dem letzten Stand befindliche Listen dieser nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum oder bei jedem CEN-Mitglied auf Anfrage erhltlich. Diese Europische Norm besteht in drei offiziellen Fassungen (Deutsch, Engli
12、sch, Franzsisch). Eine Fassung in einer anderen Sprache,die von einem CEN-Mitglied in eigener Verantwortung durch bersetzung in seine Landessprache gemacht und dem Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen. CEN-Mitglieder sind die nationalen Norm
13、ungsinstitute von Belgien, Bulgarien, Dnemark, Deutschland, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Lettland, Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, sterreich, Polen, Portugal,Rumnien, Schweden, der Schweiz, der Slowakei, Slowenien, Spanien, der Tschechi
14、schen Republik, Ungarn, dem Vereinigten Knigreich und Zypern. Management-Zentrum: rue de Stassart, 36 B-1050 Brssel 2007 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. Nr. EN 4470:2007 DEN 4470 EUROP
15、ISCHES KOMITEE FR NORMUNGEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEN 4470:2007 (D) 2 Vorwort Dieses Dokument (EN 4470:2007) wurde vom Verband der Europischen Luft-, Raumfahrt- und Verteidigungs-industrie Normung (ASD-STAN) erstellt. Nachdem Umfragen und Abstimmungen entspr
16、echend den Regeln dieses Verbandes durchgefhrt wurden, hat diese Norm die Zustimmung der nationalen Verbnde und offiziellen Behrden der Mitgliedslnder der ASD erhalten, bevor sie CEN vorgelegt wurde. Diese Europische Norm muss den Status einer nationalen Norm erhalten, entweder durch Verffentlichung
17、 eines identischen Textes oder durch Anerkennung bis Januar 2008, und etwaige entgegenstehende nationale Normen mssen bis Januar 2008 zurckgezogen werden. Es wird auf die Mglichkeit hingewiesen, dass einige Texte dieses Dokuments Patentrechte berhren knnen, ohne dass diese vorstehend identifiziert w
18、urden. CEN und/oder CENELEC sind nicht dafr verantwortlich, einige oder alle diesbezglichen Patentrechte zu identifizieren. Entsprechend der CEN/CENELEC-Geschftsordnung sind die nationalen Normungsinstitute der folgenden Lnder gehalten, diese Europische Norm zu bernehmen: Belgien, Bulgarien, Dnemark
19、, Deutschland, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Lettland, Litauen, Luxemburg, Malta, Niederlande, Norwegen, sterreich, Polen, Portugal, Rumnien, Schweden, Schweiz, Slowakei, Slowenien, Spanien, Tschechische Repu-blik, Ungarn, Vereinigtes Knigreich und Zypern. EN
20、4470:2007 (D) 3 Einleitung Diese Norm gehrt zu der Reihe von EN-Normen ber metallische Werkstoffe fr Anwendungen in der Luft- und Raumfahrt. Die allgemeine Gliederung dieser Normenreihe ist in EN 4258 beschrieben. Diese Norm wurde in bereinstimmung mit EN 4500-5 erstellt. 1 Anwendungsbereich Diese N
21、orm legt die Anforderungen an Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen Lsungsgeglht und ausgehrtet Schmiedestcke a oder D 150 mm Rm 1 200 MPa fr Anwendungen in der Luft- und Raumfahrt fest. 2 Normative Verweisungen Die folgen
22、den zitierten Dokumente sind fr die Anwendung dieses Dokuments erforderlich. Bei datierten Verwei-sungen gilt nur die in Bezug genommene Ausgabe. Bei undatierten Verweisungen gilt die letzte Ausgabe des in Bezug genommenen Dokuments (einschlielich aller nderungen). EN 4258, Luft- und Raumfahrt Metal
23、lische Werkstoffe Allgemeine Gliederung der Normung Verknpfung der Arten von EN-Normen und ihre Anwendung EN 4346, Luft- und Raumfahrt Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) Schmiedezustand Schmiedevor-material a oder D 300 mm1)EN 4500-5, Luft- und Raumfahrt Metallische Werkstoffe Regeln fr die Abfass
24、ung und Gestaltung von Werk-stoffnormen Teil 5: Besondere Regeln fr Sthle1)EN 4700-6, Luft- und Raumfahrt Stahl und hochwarmfeste Legierungen Umgeformte Erzeugnisse Techni-sche Lieferbedingungen Teil 6: Vorproduktion und Produktion Schmiedestcke2)1) Verffentlicht als ASD-Vornorm zum Zeitpunkt der He
25、rausgabe dieser Norm. 2) In Vorbereitung zum Zeitpunkt der Herausgabe dieser Norm. EN 4470:2007 (D) 4 1 Werkstoffbezeichnung Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) Element C Si Mn P S Cr Mo Ni Al Ti N2Fe min. 11,50 1,85 8,50 0,60 0,28 2 Chemische Zusammensetzung % max. 0,015 0,10 0,10 0,010 0,005 12,5
26、0 2,15 9,50 0,80 0,37 0,010Basis3 Erschmelzungsart vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umge-schmolzen 4.1 Form Schmiedestcke 4.2 Fertigungsart 4.3 Mabereich(e) mm a oder D 150 5 Technische Lieferbedingungen EN 4700-6 Lieferzustand lsungsgeglht lsungsgeglht und ausgehrtet
27、 6.1 Wrmebehandlung 820 C 860 C in l, an Luft oder in Wasser abgeschreckt + abkhlen auf 20 C 820 C 860 C in l, an Luft oder in Wasser abgeschreckt + abkhlen auf 20 C + 540 C 560 C/ t 4 h/an Luft abgekhlt 6.2 Kode fr Lieferzustand W U Verwendungszustand lsungsgeglht und ausgehrtet Lieferzustand 7 Wrm
28、ebehandlung Lieferzustand + 540 C 560 C/t 4 h/ an Luft abgekhlt Eigenschaften 8.1 Entnahme(n) siehe EN 4700-6 8.2 Probe(n) siehe EN 4700-6 8.3 Wrmebehandlung Lieferzustand Verwendungszustand 9 Mae mm a oder D 150 a oder D 150a75 a oder D 150 10 Dicke der Plattierschicht auf jeder Flche % 11 Probenri
29、chtung L T 12 Temperatur C RT RT13 Dehngrenze Rp0,2 MPa 1 100 1 100 14 Zugfestigkeit Rm MPa 1 200 1 200 15 Bruchdehnung A % 12 10 16 T Bruchein-schnrung Z % 50 45 17 Hrte 363 HB 360 HB 360 HB 18 Scherfestigkeit Rc MPa 19 Biegeversuch k 20 Kerbschlagarbeit KV 90 J; Kerbrichtung T + KV 30 J; bei 40 C;
30、 Kerbrichtung T KV 90 J; Kerbrichtung L+ KV 30 J; bei 40 C;Kerbrichtung L 21 Temperatur C 22 Beanspruchungsdauer h 23 Kriech- beanspruchung aMPa 24 Bleibende Dehnung a % 25 Zeitstand- beanspruchung RMPa 26 C Bruchdehnung A % 27 Bemerkungen (siehe Zeile 98) a EN 4470:2007 (D) 5 siehe EN 4700-6 34 Kor
31、ngre 7 G 6 44 uere Fehler siehe EN 4700-6 siehe EN 4700-6 61 Innere Fehler 7 Klasse 5 82 Gleichmigkeit des Loses siehe EN 4700-6 95 Prfung der Kennzeichnung siehe EN 4700-6 96 Maprfung siehe EN 4700-6 98 Bemerkungen a75 mm a oder D 150 mm darf in L- oder T-Richtung geprft werden. 99 Typische Anwendu
32、ng EN 4470:2007 (D) 6 100 Produktqualifikation Das Qualifikationsprogramm ist zwischen Hersteller und Kufer zu vereinbaren. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4470 July 2007 ICS 49.025.10 English Version Aerospace series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum induction melted
33、and consumable electrode remelted Solution treated and precipitation treated Forgings a or D 150 mm RmSrie arospatiale Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) labor sous vide par induction et refondu llectrode consommable Mis en solution et vieilli Pices forges et pices matrices a ou D 150 mm Rm 1 200
34、MPa Luft- und Raumfahrt Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen Lsungsgeglht und ausgehrtet Schmiedestcke a oder D 150 mm Rm 1 200 MPa This European Standard was approved by CEN on 15 February 2007. CEN members are bound to
35、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central
36、Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the o
37、fficialversions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, S
38、lovenia, Spain, Sweden, Switzerland and United Kingdom. Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4470:2007:EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE N
39、ORMALISATIONEUROPISCHES KOMITEE FR NORMUNG 1 200 MPa EN 4470:2007 (E) 2 Foreword This document (EN 4470:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Assoc
40、iation, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme
41、nt, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifyi
42、ng any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
43、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4470:2007 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aer
44、ospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum induction melted and consumable electrode reme
45、lted Solution treated and precipitation treated Forgings a or D 150 mm Rm 1 200 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referenc
46、es, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use. EN 4346, Aerospace series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum inductio
47、n melted and consumable electrode remelted Softened Forging stock a or D 300 mm. 1)EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules for steels. 1)EN 4700-6, Aerospace series Steel and heat resisting alloys Wrought product
48、s Technical specification Part 6: Pre-production and production forgings. 2)1) Published as ASD Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard. EN 4470:2007 (E) 4 1 Material designation Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Element C Si Mn P S Cr Mo Ni Al
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1