DIN EN 508-1-2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel aluminium or stainless steel sheet - Part 1 Steel German version EN 50.pdf

1、August 2014Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.060.20!%:;9“2232422www.din.deDDIN EN 508-1Roofing and cladding products from metal sheet Specification for self-supporting of steel, aluminium or stainless steelsheet Part 1: Steel;English version EN 508-1:2014,English translation of DIN EN 508-1:2014-08Dachdeckungs- und Wandbekleidungsprodukte a

3、us Metallblech Spezifikation fr selbsttragende Dachdeckungsprodukte aus Stahlblech, Aluminiumblechoder nichtrostendem Stahlblech Teil 1: Stahl;Englische Fassung EN 508-1:2014,Englische bersetzung von DIN EN 508-1:2014-08Produits de couverture et de bardage en tle mtallique Spcification pour les prod

4、uits autoportants en tles dacier, daluminium ou dacierinoxydable Partie 1: Acier;Version anglaise EN 508-1:2014,Traduction anglaise de DIN EN 508-1:2014-08SupersedesDIN EN 508-1:2009-07 andDIN EN 508-1 Corrigendum 1:2009-11www.beuth.deIn case of doubt, the German-language original shall be considere

5、d authoritative.Document comprises 47 pages07.14 DIN EN 508-1:2014-08 2 A comma is used as the decimal marker. National foreword This document (EN 508-1:2014) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinuous laying and products for wall cladding” (Secreta

6、riat: NBN, Belgium). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-02-06 AA Dachdeckungs-produkte aus Metallblech (SpA zu CEN/TC 128/SC 7). Amendments This standard differs f

7、rom DIN EN 508-1:2009-07 and DIN EN 508-1 Corrigendum 1:2009-11 as follows: a) the standard has been completely revised; b) Clause 1 “Scope” has been rendered more precise; c) Annex C “Metallic coatings” and Annex D “Dimensional tolerances” have been extensively revised; d) the former Annex E “Test

8、methods for concentrated load” has been deleted. Previous editions DIN EN 508-1: 2000-12, 2009-07 DIN EN 508-1 Corrigendum 1: 2009-11 EN 508-1 May 2014 ICS 91.060.20 Supersedes EN 508-1:2008English Version Roofing and cladding products from metal sheet - Specification for self-supporting of steel, a

9、luminium or stainless steel sheet - Part 1: Steel Produits de couverture et de bardage en tle mtallique - Spcification pour les produits autoportants en tles dacier, daluminium ou dacier inoxydable - Partie 1: Acier Dachdeckungs- und Wandbekleidungsprodukte aus Metallblech - Spezifikation fr selbstt

10、ragende Dachdeckungsprodukte aus Stahlblech, Aluminiumblech oder nichtrostendem Stahlblech - Teil 1: Stahl This European Standard was approved by CEN on 1 March 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta

11、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Engli

12、sh, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, B

13、ulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

14、 Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 508-1:2014 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROP

15、ISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 508-1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols and abbreviations .7 3.1 General 7 3.2 Materials .7 3.3 Profile definitions.8 3.4 Product geometry . 1

16、0 3.5 Symbols and abbreviations . 13 4 Requirements 14 4.1 General . 14 4.2 Materials 14 4.2.1 Materials for roll formed and brake pressed profiles 14 4.2.2 Materials for tiles 15 4.2.3 Nominal metallic coating . 15 4.2.4 Organic coatings. 15 4.3 Products 16 4.3.1 Mechanical resistance 16 4.3.2 Calc

17、ulation and test of mechanical resistance 16 4.3.3 Dimensions 17 4.3.4 Dimensional tolerances for the profiled sheets 17 4.3.5 Safety in case of fire . 17 5 Test methods . 18 5.1 Material properties 18 5.2 Mechanical properties 18 6 Designation . 18 7 Marking, labelling and packaging . 18 7.1 Markin

18、g and labelling . 18 7.2 Packaging and special ordering conditions 19 7.3 Transport, storage and handling . 19 Annex A (informative) Aluminium coated steel sheet (type A) . 20 A.1 General . 20 A.2 Specification for roof covering or cladding products . 20 A.2.1 Steel grades . 20 A.2.2 Coating mass 20

19、 A.2.3 Dimensional tolerances . 20 Annex B (normative) Multilayer coated steel sheet . 21 B.1 General . 21 B.2 Substrate material. 21 B.3 Specific requirements 21 B.3.1 Minimum nominal values of thickness . 21 B.3.2 Bituminous coating specification . 21 B.3.3 Durability . 22 DIN EN 508-1:2014-08EN 5

20、08-1:2014 (E) 3 B.4 Freedom from defects . 22 Annex C (informative) Metallic coatings . 23 Annex D (normative) Dimensional tolerances . 26 D.1 Tolerances for trapezoidal sheets . 26 D.1.1 General . 26 D.1.2 Depth of profile 26 D.1.3 Depth of stiffeners . 27 D.1.4 Pitch 28 D.1.5 Widths of crown and v

21、alley 29 D.1.6 Cover width 30 D.1.7 Radius of bends . 31 D.1.8 Deviation from straightness . 31 D.1.9 Deviation from squareness 32 D.1.10 Length . 33 D.1.11 Deviation of side lap 34 D.1.12 Curve radius and angles . 35 D.2 Tolerances for sinusoidal profiles . 35 D.3 Tolerances on tiles 35 D.3.1 Gener

22、al . 35 D.3.2 Depth of tile 36 D.3.3 Web angular displacement (Figure D.13) 37 D.3.4 Pitch 37 D.3.5 Width of crown and valley (Figure D.15) . 38 D.3.6 Cover width 38 D.3.7 Radius of bends . 39 D.3.8 Deviation from straightness . 39 D.3.9 Deviation from squareness 40 D.3.10 Length . 40 D.3.11 Contrac

23、tion or bulging 40 D.4 Methods for measuring profiles . 41 D.4.1 General . 41 D.4.2 Depth of profile 41 D.4.3 Depth of stiffeners . 42 D.4.4 Pitch 42 D.4.5 Width of crown and valley 43 D.4.6 Cover width 43 D.4.7 Radius of bends . 43 D.4.8 Straightness . 43 D.4.9 Squareness 43 D.4.10 Length . 44 D.4.

24、11 Side laps . 44 Bibliography 45 DIN EN 508-1:2014-08EN 508-1:2014 (E) 4 Foreword This document (EN 508-1:2014) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinuous laying and products for wall cladding”, the secretariat of which is held by NBN. This Europea

25、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014 and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the eleme

26、nts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 508-1:2008. EN 508 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium

27、or stainless steel sheet consists of the following parts: Part 1: Steel Part 2: Aluminium Part 3: Stainless steel According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgar

28、ia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turk

29、ey and the United Kingdom. DIN EN 508-1:2014-08EN 508-1:2014 (E) 5 Introduction Figure 1 indicates the position of this European Standard in the CEN framework of standards concerning roofing products of metal. Figure 1 Framework of standards In this European Standard, the performance of the product

30、has been defined in terms of calculation and a number of type tests. The performance of a roof constructed with these products depends not only on the properties of the product as required by this European Standard, but also on the design, construction and performance of the roof as a whole in relat

31、ion to the environment and conditions of use. DIN EN 508-1:2014-08EN 508-1:2014 (E) 6 1 Scope This part of EN 508 specifies requirements for self-supporting roofing, covering, wall cladding, lining, liner trays and tiles products for discontinuous laying made from metallic coated steel sheet with or

32、 without additional organic coatings. Sheets intended to be used with insulation and membranes are also covered. This European Standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the produc

33、ts can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable

34、 them to meet all normal service conditions. This European Standard applies to all discontinuously laid self-supporting external profiled sheets for roofing covering, wall cladding, lining and liner trays with the exception of tiles with a surface area less than 1 m2and produced by stamping. These p

35、rofiled sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. This European Standard does not cover products for structural purposes, i.e. it does cover products used in constructions of Class III (a

36、ccording to EN 1993-1-3), it does not cover products used in constructions of Classes I and II (according to EN 1993-1-3) intended to contribute to the global or partial stability of the building structure by providing racking resistance or resistance to permanent static loads (excluding self-weight

37、 of the metal sheet). No requirements for supporting construction, design of roof, cladding, lining, tile system and execution of connections and flashings are included. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispens

38、able for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10143, Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape EN 10169:2010+A1:

39、2012, Continuously organic coated (coil coated) steel flat products - Technical delivery conditions EN 10346, Continuously hot-dip coated steel flat products - Technical delivery conditions EN 14782, Self-supporting metal sheet for roofing, external cladding and internal lining - Product specificati

40、on and requirements EN ISO 6270-1, Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1) EN ISO 6988, Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988) EN ISO 9227, Corrosion tests in

41、 artificial atmospheres - Salt spray tests (ISO 9227) DIN EN 508-1:2014-08EN 508-1:2014 (E) 7 3 Terms, definitions, symbols and abbreviations For the purposes of this document, the terms and definitions given in EN 10169:2010+A1:2012 and the following apply. 3.1 General 3.1.1 self-supporting product

42、 product which will, by virtue of its material and shape, support all applied loadings (e.g. snow, wind, foot traffic, insulation, membrane) and transmit these loadings to spaced structural supports 3.2 Materials 3.2.1 hot-dip zinc coated steel sheet (type Z) product obtained by continuously hot-dip

43、 zinc coating cold reduced strips of either low carbon steel for cold forming or steel of structural quality Note 1 to entry: For steel of structural quality, see EN 10346. 3.2.2 hot-dip 5 % Al-Zn coated steel sheet (type ZA) product obtained by continuously hot-dip coating cold reduced strips of lo

44、w carbon steel for cold forming or steel of structural quality on a production line using an alloy consisting of zinc and approximately 5 % aluminium (nominal percentage by mass) Note 1 to entry: For steel of structural quality, see EN 10346. 3.2.3 hot-dip 55 % Al-Zn coated steel sheet (type AZ) pro

45、duct obtained by continuously hot-dip coating cold reduced strips of low carbon steel for cold forming or steel of structural quality on a production line using an alloy consisting of: 55 % aluminium (nominal percentage by mass); 1,6 % silicon (nominal percentage by mass); and the balance zinc Note

46、1 to entry: For steel of structural quality, see EN 10346. 3.2.4 hot-dip aluminium coated steel sheet (type A) product obtained by continuously hot-dip aluminium coating cold reduced strips of low carbon steel for cold forming steel or steel of structural quality on a production line Note 1 to entry

47、: See Annex A. 3.2.5 organic coated steel sheet product obtained by factory application of paint by roller or spray processes, or factory application of laminated organic film, on substrates of type Z, type ZA, type AZ or type A coated steel sheet Note 1 to entry: EN 10169 refers to this type of coa

48、ted steel. DIN EN 508-1:2014-08EN 508-1:2014 (E) 8 3.2.6 multilayer coated steel sheet product obtained by continuously coating on both sides hot-dip zinc coated cold reduced strips of low carbon steel for cold forming or steel of structural quality with one or multiple applications of thermoplastic

49、 asphalt compounds (minimum thickness 1,5 mm) and subsequent lamination of a metal foil with or without decorative painting Note 1 to entry: See Annex B. 3.3 Profile definitions 3.3.1 trapezoidal profiled sheet self-supporting sheet which is designed to allow it to be side and end lapped, the crowns of which may be rounded and, in addition, the crowns, webs and valleys may be stiffened Note 1 to entry: See Figures 2 to 5. Figure 2 Part of typical trapezoidal profi