DIN EN 54-30-2015 Fire detection and fire alarm systems - Part 30 Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors German versi.pdf

1、November 2015 English price group 30No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.220.20!%G7“2365720www.din.de

2、DIN EN 54-30Fire detection and fire alarm systems Part 30: Multi-sensor fire detectors Point detectors using a combination of carbon monoxide and heat sensors;English version EN 54-30:2015,English translation of DIN EN 54-30:2015-11Brandmeldeanlagen Teil 30: Mehrfachsensor-Brandmelder Punktfrmige Me

3、lder mit kombinierten CO- und Wrmesensoren;Englische Fassung EN 54-30:2015,Englische bersetzung von DIN EN 54-30:2015-11Systme de dtection et dalarme incendie Partie 30: Dtecteurs dincendie multicapteur Dtecteurs ponctuels utilisant une combinaison de capteurs de monoxide de carbone et de temprature

4、;Version anglaise EN 54-30:2015,Traduction anglaise de DIN EN 54-30:2015-11See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 99 pages 11 . 51 DIN EN 54-30:2015-11 2 A comma is use

5、d as the decimal marker. Start of application The start of application of this standard is 2015-11-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bun

6、desanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. National foreword This document (EN 54-30:2015) has been prepared by Technical Committe

7、e CEN/TC 72 “Fire detection and fire alarm systems” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was DIN-Normenausschuss Feuerwehrwesen (DIN Standards Committee Firefighting and Fire Protection), Working Group NA 031-02-01-08 AK Brandmelder Gruppe A of

8、Working Committee NA 031-02-01 AA Brandmelde- und Feueralarmanlagen. This European product standard specifies requirements, test methods and essential performance requirements for multi-sense point detectors for use in fire detection and alarm systems permanently installed in buildings and which con

9、tain a minimum of one carbon monoxide sensor and one heat sensor in their casings. Their overall performance is the result of the combination of sensors that detect various fire phenomena. The system requirements and technical application rules for fire detection and fire alarm systems complying wit

10、h this standard are specified in DIN 14675 and DIN VDE 0833-2 (VDE 0833-2). It should be noted that, in Germany, smoke detection and the corresponding activation of fire protection dampers are to meet the requirements for building inspectorate approval by the Deutsches Institut fr Bautechnik (DIBt)

11、(German Building Institute). National Annex NA (informative) Bibliography DIN 14675, Fire detection and fire alarm systems Design and operation DIN VDE 0833-2 (VDE 0833-2), Alarm systems for fire, intrusion and hold up Part 2: Requirements for fire alarm systems Regulation (EU) No. 305/2011 of the E

12、uropea n Parliamen t an d o f th e Council of 9 Mar ch 20 11 laying downharmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 54-30 April 2015 ICS 13.220.20 English Version Fire detection and f

13、ire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors Systme de dtection et dalarme incendie - Partie 30: Dtecteurs dincendie multicapteur - Dtecteurs ponctuels utilisant une combinaison de capteurs de monoxide de carbone e

14、t de temprature Brandmeldeanlagen - Teil 30: Mehrfachsensor-Brandmelder - Punktfrmige Melder mit kombinierten CO-und Wrmesensoren This European Standard was approved by CEN on 25 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions fo

15、r giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in thre

16、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bod

17、ies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

18、pain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldw

19、ide for CEN national Members. Ref. No. EN 54-30:2015 EEN 54-30:2015 (E) 2 Contents Page Foreword 6 Introduction .8 1 Scope 9 2 Normative references 9 3 Terms, definitions and abbreviations . 10 3.1 Terms and definitions 10 3.2 Abbreviations 10 4 Requirements 10 4.1 General . 10 4.2 Nominal activatio

20、n conditions/sensitivity 10 4.2.1 Individual alarm indication 10 4.2.2 Rate sensitive CO response 11 4.2.3 Response to slowly developing fires 11 4.2.4 Repeatability of CO response 11 4.2.5 Directional dependence of CO response . 11 4.2.6 Directional dependence of heat response . 11 4.2.7 Lower limi

21、t of heat response . 11 4.2.8 Reproducibility of CO response 11 4.2.9 Reproducibility of heat response 11 4.2.10 Air movement 11 4.3 Operational reliability . 12 4.3.1 Connection of ancillary devices 12 4.3.2 Monitoring of detachable detectors 12 4.3.3 Manufacturers adjustments 12 4.3.4 On-site adju

22、stment of behaviour . 12 4.3.5 Software-controlled detectors . 12 4.3.6 Long-term stability 13 4.4 Tolerance to supply voltage Variation in supply parameters 14 4.5 Performance parameters under fire conditions Fire sensitivity . 14 4.6 Durability of nominal activation/sensitivity . 14 4.6.1 Temperat

23、ure resistance . 14 4.6.2 Humidity resistance 14 4.6.3 Corrosion resistance SO2corrosion (endurance) 14 4.6.4 Shock and vibration resistance . 15 4.6.5 Electrical stability EMC, immunity (operational) . 15 4.6.6 Resistance to chemical agents . 15 5 Test and evaluation methods 15 5.1 General . 15 5.1

24、.1 Atmospheric conditions for tests . 15 5.1.2 Operating conditions for tests 16 5.1.3 Mounting arrangements . 16 5.1.4 Tolerances . 16 5.1.5 Measurement of CO response value. 16 5.1.6 Measurement of heat response value 17 5.1.7 Provision for tests 17 5.1.8 Test schedule 18 5.2 Nominal activation co

25、nditions/sensitivity 19 DIN EN 54-30:2015-11 EN 54-30:2015 (E) 3 5.2.1 Individual alarm indication . 19 5.2.2 Rate sensitive CO response . 19 5.2.3 Response to slowly developing fire 19 5.2.4 Repeatability of CO response 20 5.2.5 Directional dependence of CO response 20 5.2.6 Directional dependence

26、of heat response 21 5.2.7 Lower limit of heat response 21 5.2.8 Reproducibility of CO response 22 5.2.9 Reproducibility of heat response 22 5.2.10 Air movement . 23 5.3 Operational reliability 23 5.3.1 Connection of ancillary devices 23 5.3.2 Monitoring of detachable detectors 23 5.3.3 Manufacturers

27、 adjustments . 23 5.3.4 On-site adjustment of behaviour . 23 5.3.5 Software controlled devices . 23 5.3.6 Long-term stability (operational) . 24 5.4 Tolerance to supply voltage Variations in supply parameters 24 5.4.1 Object 24 5.4.2 Test procedure . 24 5.4.3 Requirements . 24 5.5 Performance parame

28、ters under fire conditions Fire sensitivity 25 5.5.1 Object 25 5.5.2 Principle . 25 5.5.3 Test procedure . 25 5.5.4 Requirements . 27 5.6 Durability 27 5.6.1 Temperature resistance 27 5.6.2 Humidity resistance 30 5.6.3 Corrosion resistance Sulphur dioxide SO2corrosion (endurance). 34 5.6.4 Shock and

29、 vibration resistance . 35 5.6.5 Electrical stability EMC, immunity (operational) . 39 5.6.6 Resistance to chemical agents 41 6 Assessment and verification of constancy of performance (AVCP) . 43 6.1 General . 43 6.2 Type testing . 43 6.2.1 General . 43 6.2.2 Test samples, testing and compliance cri

30、teria 44 6.2.3 Test reports 44 6.3 Factory production control (FPC) 44 6.3.1 General . 44 6.3.2 Requirements . 45 6.3.3 Product specific requirements . 47 6.3.4 Initial inspection of factory and FPC . 48 6.3.5 Continuous surveillance of FPC 48 6.3.6 Procedure for modifications 49 6.3.7 One-off produ

31、cts, pre-production products, (e.g. prototypes) and products produced in very low quantities 49 7 Classification . 50 8 Marking, labelling and packaging 50 Annex A (normative) Gas test chamber for CO response value and cross-sensitivity to chemical agents . 51 A.1 General . 51 A.2 Gas test chamber s

32、pecification . 51 DIN EN 54-30:2015-11 EN 54-30:2015 (E) 4 Annex B (normative) Fire test room . 52 B.1 General . 52 B.2 Fire test room specification . 52 Annex C (normative) Measuring instruments for smoke and CO . 55 C.1 General . 55 C.2 CO measuring instrument 55 C.3 Obscuration meter 55 C.4 Measu

33、ring ionization chamber (MIC) 55 Annex D (informative) Establishing exposure levels of chemical agents 56 D.1 General . 56 D.2 Establishing concentration of chemical agents for test gases 1 to 9 of 5.23 56 D.3 Verification of test chamber leakage 56 D.4 Establishing concentration of ozone 56 Annex E

34、 (normative) Heat tunnel for heat response value 58 E.1 General . 58 E.2 Heat tunnel specification . 58 Annex F (normative) Smouldering (pyrolysis) wood fire (TF2) . 59 F.1 General . 59 F.2 Fuel . 59 F.3 Hotplate 59 F.4 Arrangement 59 F.5 Heating rate . 59 F.6 End-of-test condition 59 F.7 Test valid

35、ity criteria 60 Annex G (normative) Glowing smouldering cotton fire (TF3) . 64 G.1 Introduction . 64 G.2 Fuel . 64 G.3 Arrangement 64 G.4 Ignition . 65 G.5 End-of-test condition 66 G.6 Test validity criteria 66 Annex H (normative) Open plastics (polyurethane) fire (TF4) . 70 H.1 Introduction . 70 H.

36、2 Fuel . 70 H.3 Conditioning 70 H.4 Arrangement 70 H.5 Ignition . 70 H.6 Method of ignition . 70 H.7 End-of-test condition 70 H.8 Test validity criteria 71 Annex I (normative) Liquid (heptane) fire (TF5) 74 I.1 Introduction . 74 I.2 Fuel . 74 I.3 Arrangement 74 I.4 Ignition . 74 I.5 End-of-test cond

37、ition 74 I.6 Test validity criteria 74 Annex J (informative) Information concerning the construction of the gas test chamber 78 J.1 General . 78 J.2 Construction of the gas test chamber 78 Annex K (informative) Construction of the heat tunnel 80 K.1 General . 80 DIN EN 54-30:2015-11 EN 54-30:2015 (E

38、) 5 K.2 Construction of the heat tunnel . 80 Annex L (informative) Apparatus for impact test. 84 L.1 General . 84 L.2 Impact apparatus construction 84 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 87 Bibliography 97 DIN

39、EN 54-30:2015-11 EN 54-30:2015 (E) 6 Foreword This document (EN 54-30:2015) has been prepared by Technical Committee CEN/TC 72 “Fire detection and fire alarm systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publicat

40、ion of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by April 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall

41、 not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) 305/2011. For relationship with EU Regulatio

42、ns see informative Annex ZA, which is an integral part of this document. EN 54, Fire detection and fire alarm systems, consists of the following parts: Part 1: Introduction; Part 2: Control and indicating equipment; Part 3: Fire alarm devices Sounders; Part 4: Power supply equipment; Part 5: Heat de

43、tectors Point detectors; Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization; Part 10: Flame detectors Point detectors; Part 11: Manual call points; Part 12: Smoke detectors Line detectors using an optical light beam; Part 13: Compatibility assessment of sy

44、stem components; Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance CEN Technical Specification; Part 16: Voice alarm control and indicating equipment; Part 17: Short circuit isolators; Part 18: Input/output devices; Part 20: Aspirating smoke detectors; Part 2

45、1: Alarm transmission and fault warning routing equipment; Part 22: Resettable line-type heat detectors currently at acceptance stage; Part 23: Fire alarm devices Visual alarms devices; DIN EN 54-30:2015-11 EN 54-30:2015(E)7 Part 24: Components of voice alarm systems Loudspeakers; Part 25: Component

46、s using radio links; Part 26: Carbon monoxide detectors Point detectors; Part 27: Duct smoke detectors; Part 28: Non-resettable line type heat detectors currently at drafting stage; Part 29: Multi-sensor fire detectors Point detectors using a combination of smoke and heat sensors; Part 30: Multi-sen

47、sor fire detectors Point detectors using a combination of carbon monoxide and heat sensors the present document; Part 31: Multi-sensor fire detectors Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors; Part 32: Planning, design, installation, commissioning, use

48、 and maintenance of voice alarm systems currently at acceptance stage. NOTE This list includes standards that are in preparation and other standards may be added. For current status of published standards refer to www.cen.eu. According to the CEN-CENELEC Internal Regulations, the national standards

49、organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo