DIN EN 617-2011 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos bunkers bins and hoppers German.pdf

1、June 2011 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 5

2、3.040.10!$s,_“1800960www.din.deDDIN EN 617Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulkmaterials in silos, bunkers, bins and hoppers (includes AmendmentA1:2010)English translation of DIN EN 617:2011-06Stetigfrderer und Systeme Sicherh

3、eits- und EMV-Anforderungen an Einrichtungen fr die Lagerung von Schttgternin Silos, Bunkern, Vorratsbehltern und Trichtern (enthlt nderung A1:2010)Englische bersetzung von DIN EN 617:2011-06Equipements et systmes de manutention continue Prescriptions de scurit et de CEM pour les quipements de stock

4、age des produits envrac en silos, soutes, rservoirs et trmies (Amendement A1:2010 inclus)Traduction anglaise de DIN EN 617:2011-06SupersedesDIN EN 617:2002-05www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.4805.11 DIN EN 617:2011-0

5、6 A comma is used as the decimal marker. Start of application The start of application of this standard is 1 June 2011. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 148 “Continuous handling equipment and systems Safety” (

6、Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-22-31 AA Stetigfrderer of Section Frdertechnik. Representatives of manufacturers and users of continuous ha

7、ndling equipment, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first plac

8、ed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying

9、this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Wh

10、ere the International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available, except for the following: IEC 60364-7-706 DIN VDE 0100-706 (VDE 0100-706) Amendments This standard differs from DIN EN 617:2002-05 as follows: a) the standard h

11、as been revised and brought in line with the new Machinery Directive 2006/42/EC; b) Annex ZA (informative) “Coverage of Essential Requirements of EU Directives” has been updated with regard to EU Directive 2004/108/EC; c) Annex ZB (informative) “Relationship between this European Standard and the Es

12、sential Requirements of EU Directive 2006/42/EC” has been updated. Previous editions DIN EN 617: 2002-05 2 DIN EN 617:2011-06 National Annex NA (informative) Bibliography DIN VDE 0100-706 (VDE 0100-706), Low-voltage electrical installations Part 7-706: Requirements for special installations or locat

13、ions Conducting locations with restricted movement 3 DIN EN 617:2011-06 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 617:2001+A1 December 2010 ICS 53.040.10 Supersedes EN 617:2001English Version Continuous handling equipment and systems - Safety and EMC req

14、uirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers Equipements et systmes de manutention continue - Prescriptions de scurit et de CEM pour les quipements de stockage des produits en vrac en silos, soutes, rservoirs et trmies Stetigfrderer und Systeme -

15、Sicherheits- und EMV-Anforderungen an Einrichtungen fr die Lagerung von Schttgtern in Silos, Bunkern, Vorratsbehltern und Trichtern This European Standard was approved by CEN on 4 June 2001 and includes Amendment 1 approved by CEN on 9 November 2010. CEN members are bound to comply with the CEN/CENE

16、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre o

17、r to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the off

18、icial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sl

19、ovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwi

20、de for CEN national Members. Ref. No. EN 617:2001+A1:2010: EEN 617:2001+A1:2010 (E) 2 Contents Foreword . 3Introduction . 41 Scope . 52 Normative references 63 Terms and definitions 84 Hazards 95 Safety and EMC requirements and/ or measures . 106 Verification of safety and EMC requirements and /or m

21、easures . 257 Information for use . 28Annex A (normative) !List of hazards“ . 33Annex B (informative) Further Documents and Remarks 37Annex C (informative) Safety signs mentioned in 7.2.3 . 38Annex D (informative) Fire or explosion hazard 39Annex ZA (informative) !Coverage of Essential Requirements

22、of EU Directives“ 41Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of the EU Directive 2006/42/EC“ 42Bibliography 44DIN EN 617:2011-06 Page EN 617:2001+A1:2010 (E) 3 Foreword This document (EN 617:2001+A1:2010) has been prepared by Technical Commit

23、tee CEN/TC 148 “Continuous handling equipment and systems - Safety“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national

24、standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendm

25、ent 1, approved by CEN on 2010-11-09. This document supersedes EN 617:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Tra

26、de Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this standard. !deleted text“ This !standard“ forms part of a series of five !standards“ the titles of which are given below:

27、EN 617, Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers !EN 618“, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk material

28、s except fixed belt conveyors !EN 619“, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads EN 620, Continuous handling equipment and systems Safety and EMC requirements for fixed belt con-veyors for bulk material EN 741, Continuo

29、us handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Stand

30、ard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United King

31、dom. DIN EN 617:2011-06 EN 617:2001+A1:2010 (E) 4 Introduction This European Standard is a type C standard as stated in EN 1070. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard. While producing this standard it was assumed that: only co

32、mpetent persons operate the system; components without specific requirements are: a) designed in accordance with the usual engineering practice and calculation codes, including all failure modes (see also Bibliography and annex B); b) of sound mechanical and electrical construction; c) made of mater

33、ials with adequate strength and of suitable quality; d) made of materials free of defects. harmful materials, such as asbestos are not used as part of the machine; components are kept in good repair and working order, so that required characteristics remain despite wear; by design of the load bearin

34、g elements, a safe operation of the system is assured for loading ranging from zero to 100 % of the rated possibilities and during the tests; to ensure the correct function of the equipment the ambient temperature is maintained between -5 C to + 50 C; negotiation occurred between the manufacturer1)a

35、nd the user concerning particular conditions for the use and places of use for the machinery related to health and safety; the place of installation allows a safe use of the machine. 1) “manufacturer” within the European Union is to be understood as intended in the Machinery Directive. DIN EN 617:20

36、11-06 EN 617:2001+A1:2010 (E) 5 1 Scope This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their

37、 built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. The following parts are dealt with in this standard (see Figure 1

38、): Key A Bulk material to be stored B Storage space limited by the silo structure C Charging D Discharging E Associated and additional equipment (e.g. flow aid devices, instrumentation, local control systems) F Working and traffic area Figure 1 Parts of a storage equipment NOTE Silos are made of dif

39、ferent materials e.g. concrete, steel, aluminium, spun rayon, wood. Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e.g. low or high temperatures out

40、of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be stored included their flow the nature of which could lead to a dangerous situation. This standard does not cover requirements for: movable, non permanent storage equipm

41、ent such as road vehicles, rail wagons, containers for bulk materials, ships and barges; blow tanks and pressure vessels as used in pneumatic conveying systems; stockpiles and flat storage; storage equipment for non bulk materials (liquid, gas, slurries, sludge, silage); dismantling and transport of

42、 storage equipments; procedure for entering the silo and behaviour of persons inside the silo; DIN EN 617:2011-06 EN 617:2001+A1:2010 (E) 6 storage equipments for underground mining; !noise.“ This European Standard deals with the technical requirements for electromagnetic compatibility (EMC). 2 Norm

43、ative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ EN 131, Ladders Terms, types,

44、functional sizes !deleted text“ EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of the parts of the human body EN 418:1992, Safety of machinery Emergency stop equipment, functio

45、nal aspects Principles for design EN 547-1:1996, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required for openings for whole body access into machinery EN 547-3, Safety of machinery Human body measurements Part 3: Anthropometric data !deleted text“ E

46、N 574, Safety of machinery Two- hand control devices Functional aspects Principles for design !EN 618“, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk material except fixed belt conveyors EN 620, Continuous handling equipment and s

47、ystems Safety and EMC requirements for fixed belt conveyors for bulk material EN 626-1, Safety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 741, Continuous handling equipment and systems

48、Safety requirements for systems and their components for pneumatic handling of bulk material EN 795, Protection against falls from a height Anchor devices Requirements and testing EN 811:1996, Safety of machinery Safety distances to prevent danger zone being reached by the lower limbs EN 842, Safety

49、 of machinery Visual danger signals General requirements, design and testing EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety related parts of control systems Part 1: General principles for design EN 1037:1995, Safety of machinery Prevention of unexpected start- up EN 1088:1