DIN EN 686-2011 Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing German version EN 686 2011-07《弹性地板覆盖物 带花纹和不带花纹有泡沫材料背衬的油毡规格 德文版本EN 686-.pdf

1、July 2011 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97

2、.150!$s4“1802917www.din.deDDIN EN 686Resilient floor coverings Specification for plain and decorative linoleum on a foam backingEnglish translation of DIN EN 686:2011-07Elastische Bodenbelge Spezifikation fr Linoleum mit und ohne Muster mit SchaumrckenEnglische bersetzung von DIN EN 686:2011-07Revte

3、ments de sol rsilients Spcifications pour le linolum uni et dcoratif sur sous-couche de mousseTraduction anglaise de DIN EN 686:2011-07SupersedesDIN EN 686:1997-09www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.06.11 13DIN EN 686:2

4、011-07 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Kuns

5、tstoffe (Plastics Standards Committee), Working Committee NA 054-04-05 AA Bodenbelge. Amendments This standard differs from DIN EN 686:1997-09 as follows: a) normative references have been updated; b) in Table 2 “Classification”, class 22+ has been added; c) in Table 2, the level of use designations

6、 have been brought in line with DIN EN 685; d) the standard has been editorially revised. Previous editions DIN EN 686: 1997-09 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 686 April 2011 ICS 97.150 Supersedes EN 686:1997English Version Resilient floor coverings - Specification for plain a

7、nd decorative linoleum on a foam backing Revtements de sol rsilients - Spcifications pour le linolum uni et dcoratif sur sous-couche de mousse Elastische Bodenbelge - Spezifikation fr Linoleum mit und ohne Muster mit Schaumrcken This European Standard was approved by CEN on 10 March 2011. CEN member

8、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

9、 to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managemen

10、t Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

11、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any

12、 form and by any means reserved worldwide for CEN national Members. Ref. No. EN 686:2011: EEN 686:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .54 Identification .55 Requirements .55.1 General requirements 55.2 Classification requirements 86 Marking .9A

13、nnex A (informative) Optional properties 10Bibliography . 11DIN EN 686:2011-07 EN 686:2011 (E) 3 Foreword This document (EN 686:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This European Standard

14、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this

15、 document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 686:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are

16、bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spai

17、n, Sweden, Switzerland and the United Kingdom. DIN EN 686:2011-07 EN 686:2011 (E) 4 1 Scope This European Standard specifies the characteristics of plain and decorated linoleum on a foam backing as a compound floor covering, supplied in roll form. To encourage the consumer to make an informed choice

18、, this European Standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term linoleum is frequently incorrectly applied to a range of floor coverings

19、, often to those based on polyvinyl chloride or rubber. Such materials are not included in this standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, th

20、e latest edition of the referenced document (including any amendments) applies. EN 425, Resilient and laminate floor coverings Castor chair test EN 426, Resilient floor coverings Determination of width, length, straightness and flatness of sheet material EN 428, Resilient floor coverings Determinati

21、on of overall thickness EN 429, Resilient floor coverings Determination of the thickness of layers EN 430, Resilient floor coverings Determination of mass per unit area EN 431, Resilient floor coverings Determination of peel resistance EN 433, Resilient floor coverings Determination of residual inde

22、ntation after static loading EN 435, Resilient floor coverings Determination of flexibility EN 670, Resilient floor coverings Identification of linoleum and determination of cement content and ash residue EN 685, Resilient, textile and laminate floor coverings Classification EN ISO 105-B02, Textiles

23、 Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) DIN EN 686:2011-07 EN 686:2011 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 linoleum

24、cement binder in linoleum, consisting of a mixture of linseed oil and/or other vegetable drying oils, rosin and drying oil catalysts, which is converted to a semi-elastic mass by an oxidative curing process 3.2 linoleum product produced by calendering a homogeneous mixture of linoleum cement, cork a

25、nd/or wood flour, pigments and inorganic filler onto a fibrous backing; the product is then converted into its final form by an oxidative curing process. NOTE The only chemical cross-linking bondings in linoleum will be those which are formed during the oxidation process. 3.3 linoleum on a foam back

26、ing product formed by laminating linoleum on to a foam layer 4 Identification Linoleum shall be identified by its ability to be disintegrated in 0,5 mol/l potassium hydroxide/methanol solution and by the determination of cement content and ash residue. The minimum amount of linoleum cement shall be

27、30 % when tested in accordance with EN 670. The maximum amount of inorganic filler (ash residue) shall be 50 % when tested in accordance with EN 670. 5 Requirements 5.1 General requirements All classes of linoleum on foam backing shall comply with the appropriate general requirements specified in Ta

28、ble 1, when tested in accordance with the methods given therein. DIN EN 686:2011-07 EN 686:2011 (E) 6 Table 1 General requirements Property Requirement Test method Rolls length m width mm Not less than the nominal values EN 426 Overall thickness mm average individual values Nominal value 0,20 Nomina

29、l value 0,25 EN 428 Thickness of linoleum mm average individual values Nominal value 0,15 Nominal value 0,20 EN 429 Thickness of fibrous backing average mm 0,80 Thickness of foam backing mm average Nominal value 0,10 Mass per unit area g/m2average nominal value 10 % EN 430 Residual indentation after

30、 static loading mmaverage 0,30 EN 433 Flexibility Thickness Mandrel of linoleum diameter (nominal) 2,0 mm 30 mm 2,5 mm 40 mm Shall show no signs of cracking when bent around the appropriate mandrel EN 435 Method A DIN EN 686:2011-07 EN 686:2011 (E) 7 Table 1 (continued) Property Requirement Test met

31、hod Colour fastness to artificial light 6 minimum EN ISO 105-B02 Method 31)Effect of a castor chair No damage shall be apparent. EN 425 Peel resistance between foam backing and fibrous backing average N/50mm 10 EN 431 1)Before comparing the test piece, expose the reference sample together with the B

32、lue Wool cloth to the xenon arc lamp, until a contrast is produced on Blue Wool Reference 2 equal to the contrast illustrated by Grey Scale 3. This step is necessary to remove the inherent stove yellowing of linoleum before the stable colouration is achieved. DIN EN 686:2011-07 EN 686:2011 (E) 8 5.2

33、 Classification requirements The classification scheme for resilient floor coverings is described in EN 685. The requirements for floor coverings described in this standard sold as a compound floor covering, in accordance with this scheme, are related to the nominal thickness of the linoleum, as sho

34、wn in Table 2. Table 2 Classification Class Symbol Level of use Nominal thickness of the linoleum, mm 21 domestic moderate 2,0 22 domestic general 22+ domestic general 23 domestic heavy 31 commercial moderate 2,0 32 commercial general 33 commercial heavy 2,5 41 light industrial moderate 2,0 DIN EN 6

35、86:2011-07 EN 686:2011 (E) 9 6 Marking Floor coverings of plain and decorative linoleum on a foam backing and/or their packaging shall bear the following marking: a) number and date of this European Standard, i.e. EN 686:2011; b) manufacturers or suppliers identification; c) product name; d) colour/

36、pattern, and batch and roll number; e) classes/symbols appropriate for the product; f) type of foam backing; g) length, width and thickness of rolls. DIN EN 686:2011-07 EN 686:2011 (E) 10 Annex A (informative) Optional properties Where the following properties are required for specific applications,

37、 the floor covering should be tested in accordance with the appropriate methods. electrical resistance (see EN 1081); electrostatic propensity (see EN 1815); effect of stains (see EN 423); cigarette resistance (see EN 1399): In general use, a linoleum floor covering, depending on the colour and/or p

38、attern, is expected to have the following rating when tested in accordance with EN 1399: Method A, stubbed cigarettes; rating 4 or higher Method B, burning cigarettes; rating 3 or higher sound insulation (see EN ISO 10140-3 and EN ISO 717-2). DIN EN 686:2011-07 EN 686:2011 (E) 11 Bibliography 1 EN 4

39、23, Resilient floor coverings Determination of resistance to staining 2 EN 1081, Resilient floor coverings Determination of electrical resistance 3 EN 1399, Resilient floor coverings Determination of resistance to stubbed and burning cigarettes 4 EN 1815, Resilient and textile floor coverings Assess

40、ment of static electrical propensity 5 EN ISO 10140-3, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (ISO 10140-3:2010) 6 EN ISO 717-2, Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 717-2:1996) DIN EN 686:2011-07