DIN EN 741-2011 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials German version EN 741 2000.pdf

1、June 2011 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 5

2、3.040.30!$rC“1792532www.din.deDDIN EN 741Continuous handling equipment and systems Safety requirements for systems and their components for pneumatichandling of bulk materials (includes Amendment A1:2010)English translation of DIN EN 741:2011-06Stetigfrderer und Systeme Sicherheitsanforderungen an S

3、ysteme und ihre Komponenten zur pneumatischenFrderung von Schttgut (enthlt nderung A1:2010)Englische bersetzung von DIN EN 741:2011-06Equipements et systmes de manutention continue Prescriptions de scurit pour les systmes et leurs composants pour la manutentionpneumatique des produits en vrac (Amend

4、ement A1:2010 inclus)Traduction anglaise de DIN EN 741:2011-06SupersedesDIN EN 741:2000-03www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.3805.11 DIN EN 741:2011-06 A comma is used as the decimal marker. Start of application The st

5、art of application of this standard is 1 June 2011. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 148 “Continuous handling equipment and systems Safety” (Secretariat: AFNOR, France). The responsible German body involved in

6、 its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-22-31 AA Stetigfrderer of Section Frdertechnik. Representatives of manufacturers and users of continuous handling equipment, and of the employers liability insurance associati

7、ons contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serve

8、s to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Mac

9、hinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Sta

10、ndards with the same number, there are no national standards available. Amendments This standard differs from DIN EN 741:2000-03 as follows: a) the standard has been revised and brought in line with the new Machinery Directive 2006/42/EC; b) Annex ZA (informative) “Relationship between this European

11、 Standard and the Essential Requirements of the EU Directive 2006/42/EC” has been modified in accordance with the new Machinery Directive 2006/42/EC. Previous editions DIN EN 741: 2000-03 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 741:2000+A1 December 2010 ICS 53.040.30 Supersedes EN 741

12、:2000English Version Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials Equipements et systmes de manutention continue Prescriptions de scurit pour les systmes et leurs composants pour la manutention pneumatique des

13、 produits en vrac Stetigfrderer und Systeme Sicherheitsanforderungen an Systeme und ihre Komponenten zur pneumatischen Frderung von SchttgutThis European Standard was approved by CEN on 1 July 1999 and includes Amendment 1 approved by CEN on 16 November 2010. CEN members are bound to comply with the

14、 CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management

15、 Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status a

16、s the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Roma

17、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved

18、worldwide for CEN national Members. Ref. No. EN 741:2000+A1:2010: EEN 741:2000+A1:2010 (E) Contents Foreword 3Introduction . 41 Scope 52 Normative references 53 Terms and definitions . 64 List of hazards 205 Safety requirements and/or safety measures . 206 Verification of safety requirements and/or

19、measures 247 Information for use 26Annex A (normative) List of hazards according to !EN ISO 12100-1“ in comparison with annex I of the “Machinery Directive“. 31Annex B (informative) Bibliography 33Annex C (informative) Fire or explosion hazard 34Annex ZA (informative) !Relationship between this Euro

20、pean Standard and the Essential Requirements of the EU Directive 2006/42/EC“ 35DIN EN 741:2011-06 Page2EN 741:2000+A1:2010 (E) Foreword This document (EN 741:2000+A1:2010) has been prepared by Technical Committee CEN/TC 148 “Continuous handling equipment and systems - Safety“, the secretariat of whi

21、ch is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibil

22、ity that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-11-16. This document supersedes EN 741:2000. The start and f

23、inish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship wi

24、th EU Directive(s), see informative Annex ZA, which is an integral part of this standard. This standard forms part of a series of five standards the titles of which are given below: EN 617, !Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bu

25、lk materials in silos, bunkers, bins and hoppers“ EN 618, !Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors“ EN 619, !Continuous handling equipment and systems Safety and EMC requirements for equ

26、ipment for mechanical handling of unit loads“ EN 620, !Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials“ EN 741, Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of b

27、ulk materials !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

28、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 741:2011-06 3EN 741:2000+A1:2010 (E) Introduction This European standard is a type C standard as defin

29、ed in !EN ISO 12100-1“. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for systems and components that have been designed and built accordin

30、g to the provisions of this type C standard. While producing this standard it was assumed that: - only trained persons operate the machine; - parts without specific requirements are: a) designed in accordance with the usual engineering practice and calculation codes, including all failures modes; b)

31、 of sound mechanical and electrical construction; c) made of materials with adequate strength and of suitable quality; d) made of materials free of defects; - harmful materials, such as asbestos are not used as part of the system and components; - components and system are kept in good repair and wo

32、rking order, so that the required characteristics remain despite wear; - by design of the load bearing elements, a safe operation of the system and components is assured for loading ranging from zero to 100 % of the rated possibilities and during the tests; - the ambient air temperature is maintaine

33、d between - 15 C and + 40 C; - the relative humidity is kept between limits which do not impede the safe working of the system and components; - the components (see clause 3.4) are not exposed to external vibration; !deleted text“ - a negotiation takes place between the user / installer and the manu

34、facturer concerning the particular conditions for the use and places of use of the machinery; - the working area is adequately lit; - the places of installation allow a safe use of the system; - safety data sheets on the bulk materials to be conveyed are provided by the user / installer and are part

35、 of the design criteria. EN 617, EN 618 and EN 620 may need to be considered for a complete continuous handling system (machine). DIN EN 741:2011-06 4EN 741:2000+A1:2010 (E) 1 Scope 1.1 This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and co

36、mponents as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s). 1.2 This European standard deals with the technical requirements to minimise the hazards listed in c

37、lause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to !EN ISO 12100-1“. and the safety require

38、ments and/or measures are specified in the same order as they are given in Annex A. 1.3 This standard applies to design, on site assembly, and commissioning stages. 1.4 This standard applies also to the built-in actuators and parts of the systems, which control the components. 1.5 Exclusions This st

39、andard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e.g.: ship, unloaders, .). This standard does not take into account the risks of burns and scalds by the radiation of heat sources or

40、by contact with hot gases. This standard does not take into account the risk generated by ionising materials used in measuring equipment (e.g. level indicators). This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosi

41、ve gases, . This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials. The safety requirements for the transportation including loading and unloading of the components are not covered by this standard. This standard

42、 does not apply to pneumatic conveying systems used underground, for mining and in public areas. This European standard does not establish the additional requirements for: freezer applications, high temperatures, corrosive environments, strong magnetic fields, potentially explosive atmospheres, radi

43、oactive environment, operation on ships and earthquake effects, hazards during decommissioning. !This standard does not specify the requirements for hazards due to noise.“ 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated ref

44、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !deleted text“ EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ EN 953:1997, Safety of machiner

45、y Guards General requirements for the design and construction of fixed and movable guards EN 1037:1995, Safety of machinery Prevention of unexpected start-up DIN EN 741:2011-06 5EN 741:2000+A1:2010 (E) EN 1050:1996, Safety of machinery Risk assessment EN 1070: 1998, Safety of machinery Terminology E

46、N 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1127-1:1997, Safety of machinery Fire and explosions Part 1: Explosion prevention and protection !deleted text“ EN 50014:1992, Electrical apparatus for potentially explosive atmosphere

47、s General requirements EN 50082-2:1995, Electromagnetic compatibility Generic immunity standard Part 2: Industrial environment !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified)“ EN 60529:1991, Degrees of protection provid

48、ed by enclosures (code IP) EN 61310-2:1995, Safety of machinery Indication, marking and actuation Part 2: Requirements for marking EN 1672-2:1997, Food processing machinery Basic concepts Part 2: Hygiene requirements CENELEC R044-001:1999, Guidance and recommendations for the avoidance of hazards due to static electricity !EN ISO 12100-1, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodol