1、March 2015 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、23.020.30!%A*p“2300777www.din.deDDIN EN 764-4Pressure equipment Part 4: Establishment of technical delivery conditions for metallicmaterials;English version EN 764-4:2014,English translation of DIN EN 764-4:2015-03Druckgerte Teil 4: Erstellung von technischen Lieferbedingungen fr metallische Werksto
3、ffe;Englische Fassung EN 764-4:2014,Englische bersetzung von DIN EN 764-4:2015-03Equipements sous pression Partie 4: Etablissement des conditions techniques de livraison des matriaux mtalliques;Version anglaise EN 764-4:2014,Traduction anglaise de DIN EN 764-4:2015-03SupersedesDIN EN 764-4:2003-01ww
4、w.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 43 pages 02.15 DIN EN 764-4:2015-03 2 A comma is used as the decimal marker. National foreword This document (EN 764-4:2014) has been prepared by Technical Committee CEN/TC 54 “Unfired press
5、ure vessels” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the DIN-Normenausschuss Chemischer Apparatebau (DIN Standards Committee Process Engineering), Working Committee NA 012-00-05 AA Unbefeuerte Druckbehlter. Amendments This standard differs from
6、 DIN EN 764-4:2003-01 as follows: a) the standard has been completely revised; b) normative references have been updated; c) the terminology has been changed; established materials and new materials have been deleted; d) Subclauses A.1 to A.3 have been deleted; Subclause A.4 has been transferred to
7、EN 764-5:2014; e) a number of subclauses have been completely revised: B.3.4, B.3.10, B.3.12 and Annex F. Annex E has been deleted. Annex F is now Annex E and a new Annex F has been added; f) Subclauses B.3.1 and C.3.1: the number of casts for a single producer has been increased to 5. New: for one
8、material a group of producers can perform tests, then each test on three casts. Previous editions DIN EN 764-4: 2003-01 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 764-4 December 2014 ICS 23.020.30 Supersedes EN 764-4:2002English Version Pressure equipment - Part 4: Establishment of technic
9、al delivery conditions for metallic materials Equipements sous pression - Partie 4: Etablissement des conditions techniques de livraison des matriaux mtalliques Druckgerte - Teil 4: Erstellung von technischen Lieferbedingungen fr metallische Werkstoffe This European Standard was approved by CEN on 8
10、 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
11、be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to
12、 the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
13、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management
14、 Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 764-4:2014 EEN 764-4:2014 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions, symbols and abbrev
15、iations . 6 3.1 Terms and definitions . 6 3.2 Symbols and abbreviations 6 4 Types of technical delivery conditions . 8 4.1 Harmonized European Standards for material for pressure equipment 8 4.2 European Approvals for Materials for pressure equipment (EAMs) 8 4.3 Particular Material Appraisals for p
16、ressure equipment (PMAs) . 8 5 Content of technical delivery conditions for materials for pressure equipment 9 5.1 General 9 5.2 Requirements . 9 5.3 Testing and inspection 11 5.4 Marking . 12 Annex A (normative) Procedures for the establishment of European Approvals for pressure equipment Materials
17、 (EAM) . 13 A.1 General 13 A.2 European Approvals for Materials . 13 A.3 Requirements for the establishment of an EAM . 13 A.4 Title scheme and structure of an EAM 14 Annex B (normative) Appraisal schedule for ferritic and martensitic steels 16 B.1 General 16 B.2 Test procedures . 16 B.3 Required te
18、sting. 17 B.4 Subsequent testing 21 B.5 Collective tests . 22 Annex C (normative) Appraisal schedule for austenitic and austenitic-ferritic steels . 24 C.1 General 24 C.2 Test procedures . 24 C.3 Basic testing . 25 C.4 Sampling . 27 C.5 Extent of testing . 27 Annex D (normative) Appraisal schedule f
19、or cast steels. 28 D.1 General 28 D.2 Test procedures . 28 D.3 Basic testing . 29 D.4 Sampling . 31 D.5 Extent of testing . 31 Annex E (normative) Test programme for welded specimen after stress relief procedure 33 E.1 Test programme . 33 E.2 Position of specimen . 33 Annex F (informative) Example f
20、or Particular Material Appraisal (PMA) for steel . 35 Annex G (informative) History of EN 764-4 . 38 DINEN 764-4:2015-03EN 764-4:2014(E)3Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC on Pressure Equipment . 39 Bibliography
21、40 DIN EN 764-4:2015-03 EN 764-4:2014 (E) 4 Foreword This document (EN 764-4:2014) has been prepared by Technical Committee CEN/TC 54 “Unfired pressure vessels”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of
22、 an identical text or by endorsement, at the latest by June 2015 and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be hel
23、d responsible for identifying any or all such patent rights. This document supersedes EN 764-4:2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship
24、with EU Directive 97/23/EC (PED), see informative Annex ZA, which is an integral part of this document. Regarding the most significant technical changes that have been implemented in this new edition of EN 764-4, see Annex G. EN 764, Pressure equipment, consists of the following parts: Part 1: Termi
25、nology - Pressure, temperature, volume, nominal size; Part 2: Quantities, symbols and units; Part 3: Definition of parties involved; Part 4: Establishment of technical delivery conditions for metallic materials (the present document); Part 5: Inspection documentation of metallic materials and compli
26、ance with the material specification; Part 6: Structure and content of operating instructions Technical Report CEN/TR 764-6; Part 7: Safety systems for unfired pressure equipment; Part 8: Proof test Technical Specification prCEN/TS 764-8, currently under development. According to the CEN-CENELEC Int
27、ernal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
28、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DINEN 764-4:2015-03EN 764-4:2014(E)5 1 Scope This European Standard specifies the requirements, under the regime of the
29、 EU Directive 97/23/EC on Pressure Equipment (PED), for the establishment of the technical delivery conditions in the form of: harmonized European Standards for material; European Approval for Materials (EAM); Particular Material Appraisal (PMA) for metallic materials for pressure equipment in all p
30、roduct forms. Welding consumables are not covered by this standard. This European Standard was developed predominantly on the basis of steel, nickel and nickel-based materials. However, application to other materials is not restricted but should consider specific aspects relevant to the material con
31、cerned. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including a
32、ny amendments) applies. EN 764-1:2004, Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size EN 764-2:2012, Pressure equipment - Part 2: Quantities, symbols and units EN 10028 (all parts), Flat products made of steels for pressure purposes EN 10164, Steel products wi
33、th improved deformation properties perpendicular to the surface of the product - Technical delivery conditions EN 10204, Metallic products - Types of inspection documents EN 10213, Steel castings for pressure purposes EN 10216 (all parts), Seamless steel tubes for pressure purposes - Technical deliv
34、ery conditions EN 10217 (all parts), Welded steel tubes for pressure purposes - Technical delivery conditions EN 10222 (all parts), Steel forgings for pressure purposes EN 10272, Stainless steel bars for pressure purposes EN 10273, Hot rolled weldable steel bars for pressure purposes with specified
35、elevated temperature properties EN 10314, Method for the derivation of minimum values of proof strength of steel at elevated temperatures EN ISO 148-1, Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1) EN ISO 204, Metallic materials - Uniaxial creep testing in tensio
36、n - Method of test (ISO 204) EN ISO 6892-1:2009, Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1) DIN EN 764-4:2015-03 EN 764-4:2014(E)6 EN ISO 10052, Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound -
37、 Survey method (ISO 10052) EN ISO 15607, Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607) CR ISO 15608:2000, Welding - Guidelines for a metallic material grouping system (ISO/TR 15608:2000) EN ISO 15614-1, Specification and qualification of wel
38、ding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1) 3 Terms and definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and de
39、finitions apply. 3.1.1 European Approval for Materials EAM technical document defining the characteristics of materials intended for repeated use in the manufacture of pressure equipment which are not covered by any harmonized standard Note 1 to entry: See Article 11 of the EU Directive 97/23/EC on
40、Pressure Equipment (PED) and see also the PED Guideline 7/26. 3.2 Symbols and abbreviations For the purposes of this standard, the symbols and abbreviations of EN 764-1:2004, EN 764-2:2012 and the following in Table 1 and Table 2 apply. DINEN 764-4:2015-03EN 764-4:2014(E)7 Table 1 Symbols and units
41、Symbols Characteristic Units b width mm e thickness mm h max. permissible reinforcement of weld mm T temperature C TDdesign temperature C A elongation after fracture % C constant D diameter mm E modulus of elasticity MPa G shear modulus MPa HV Vickers hardness KV2Charpy V-notch impact energy J Loori
42、ginal gauge length mm P pressure bar PLMparameter according to Larson-Miller Reyield strength MPa ReHupper yield strength MPa ReLlower yield strength MPa Rmtensile strength MPa Rcm/t/Tcreep rupture strength for t hours at T C MPa Rm/Ttensile strength at temperature T MPa Rp0,2/T0,2 % proof strength
43、at temperature T MPa Rp0,20,2 % proof strength MPa Rp1,01,0 % proof strength MPa Rp1,0/T1,0 % proof strength at temperature T MPa Sooriginal cross sectional area mm2t time h linear expansion coefficient K 1 strain % V Poissons ratio DINEN 764-4:2015-03EN 764-4:2014(E)8 Table 2 Abbreviations Abbrevia
44、tion Description EAM European Approval for Materials EC European Commission PED Pressure Equipment Directive PMA Particular Material Appraisal OJEU Official Journal of the European Union 4 Types of technical delivery conditions 4.1 Harmonized European Standards for material for pressure equipment Ha
45、rmonized European material standards under the regime of the PED define the technical requirements for materials frequently used in pressure equipment in Europe. It is within the remit of the responsible technical committee for materials to check at each occasion of the revision work whether related
46、 material grades covered by an EAM are used to an extent that justifies the incorporation of the grade into the relevant harmonized European material Standard. 4.2 European Approvals for Materials for pressure equipment (EAMs) A European approval for materials means a technical document defining the
47、 characteristics of materials intended for repeated use in the manufacture of pressure equipment, the type of which is not covered by any harmonized European material standard. According to Guiding Principles for the contents of EAM drafts, agreed by the Member States of the European Union and the E
48、uropean Commission, it shall i.a. describe material properties in a concise, complete and correct manner. The ways and means undertaken to achieve an EAM and a data sheet containing at least the applicable elements is given in Annex A. An EAM shall not be issued for: a) a grade of material listed in a current or former national material standard that has a specification covered by a harmonized European material standard; b) a grade of material which is previously included in a European national materia
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1