DIN EN 822-2013 Thermal insulating products for building applications - Determination of length and width German version EN 822 2013《建筑物用隔热产品 长度和宽度测定 德文版本EN 822-2013》.pdf

1、May 2013 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.

2、100.60!%$*|“2010789www.din.deDDIN EN 822Thermal insulating products for building applications Determination of length and width;English version EN 822:2013,English translation of DIN EN 822:2013-05Wrmedmmstoffe fr das Bauwesen Bestimmung der Lnge und Breite;Englische Fassung EN 822:2013,Englische be

3、rsetzung von DIN EN 822:2013-05Produits isolants thermiques destins aux applications du btiment Dtermination de la longueur et de la largeur;Version anglaise EN 822:2013,Traduction anglaise de DIN EN 822:2013-05SupersedesDIN EN 822:1994-11www.beuth.deDocument comprises 10 pagesIn case of doubt, the

4、German-language original shall be considered authoritative.04.13 DIN EN 822:2013-05 2 A comma is used as the decimal marker. National foreword This document (EN 822:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany) The re

5、sponsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-60 AA Wrmedmmstoffe. Amendments This standard differs from DIN EN 822:1994-11 as follows: a) the standard has been editorially revised.

6、 Previous editions DIN 1101: 1938-09, 1952x-01, 1960-10, 1970-04, 1980-03, 1989-11 DIN 18165: 1957-08, 1963-03 DIN 18164: 1963-01, 1966-08 DIN 1104-1: 1970-04, 1980-03 DIN 18164-1: 1972-12, 1979-06, 1991-12, 1992-08 DIN 18165-1: 1975-01, 1987-03, 1991-07 DIN 52275-1: 1977-01 DIN 18161-1: 1976-12 DIN

7、 18174: 1981-01 DIN EN 822: 1994-11 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 822 March 2013 ICS 91.100.60 Supersedes EN 822:1994English Version Thermal insulating products for building applications - Determination of length and width Produits isolants thermiques destins aux applications

8、du btiment - Dtermination de la longueur et de la largeur Wrmedmmstoffe fr das Bauwesen - Bestimmung der Lnge und Breite This European Standard was approved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

9、 this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offici

10、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of A

11、ustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw

12、eden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national

13、 Members. Ref. No. EN 822:2013: E2 Contents Page Foreword . 3 1 Scope 5 2 Normative references . 5 3 Terms and definitions 5 4 Principle 5 5 Apparatus . 5 6 Test specimens 5 7 Procedure . 6 8 Calculation and expression of results 7 9 Accuracy of measurement . 7 10 Test report 7 DIN EN 822:2013-05 EN

14、 822:2013 (E) 3 Foreword This document (EN 822:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical

15、 text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held

16、responsible for identifying any or all such patent rights. This document supersedes EN 822:1994. The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test method

17、s for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative p

18、rovisions of the Member States relating to construction products (89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building but it may also be used in other areas where it is relevant. This European test standard is one

19、of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications Determination of length and width EN

20、 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products

21、 for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laborator

22、y conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under speci

23、fied compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep DIN EN 822:2013-05 EN 822:2013 (E) 4 EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to fa

24、ces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building a

25、pplications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long-term water absorption by immers

26、ion EN 12088, Thermal insulating products for building applications Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determinatio

27、n of shear behaviour EN 12091, Thermal insulating products for building applications Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium under specified temperature and humidity conditions EN 12430, Thermal insu

28、lating products for building applications Determination of behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 13793, Thermal insulating products for building applications Determination of beh

29、aviour under cyclic loading EN 13820, Thermal insulating materials for building applications Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Bel

30、gium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, T

31、urkey and the United Kingdom. DIN EN 822:2013-05 EN 822:2013 (E) 5 1 Scope This European Standard specifies the equipment and procedures for determining the length and width of full-size products. It is applicable to thermal insulating products. 2 Normative references This European Standard contains

32、 no normative references. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 length l longer linear dimension of the major surface of the test specimen 3.2 width b shorter linear dimension of the major surface of the test specimen, measured at r

33、ight angles to the length 4 Principle A test specimen is placed on a flat surface and direct linear measurement is made with a metal rule or a metal tape. 5 Apparatus 5.1 A flat surface. 5.2 Metal rule or metal tape, graduated in millimetres and permitting reading to an accuracy of 0,5 mm. Any test

34、equipment which provides the same result with at least the same accuracy may be used. 6 Test specimens 6.1 Dimensions of test specimens The test specimen shall be the full-size product. 6.2 Number of test specimens The number of test specimens shall be as specified in the relevant product standard.

35、In the absence of a product standard, the number of test specimens may be agreed between parties. 6.3 Conditioning of test specimens The test specimens shall be stored for at least 6 h at (23 5) C. In cases of dispute, they shall be stored at (23 2) C and (50 5) % relative humidity for the time spec

36、ified in the relevant product standard. DIN EN 822:2013-05 EN 822:2013 (E) 6 7 Procedure 7.1 Test conditions The test shall be carried out at (23 5) C. In cases of dispute, it shall be carried out at (23 2) C and (50 5) % relative humidity. 7.2 Test procedure Lay the test specimen carefully on a fla

37、t surface. For test specimens with both dimensions less than or equal to 1,5 m, take one measurement of length, l, and one measurement of width, b, at the positions shown in Figure 1. For test specimens greater than 1,5 m in length, make one additional width measurement for each extra metre of lengt

38、h, up to a maximum of five measurements, with the measurements equally spaced as shown in Figure 2. For test specimens greater than 1,5 m in width, make one additional length measurement for each extra metre of width, with the measurements equally spaced. All lengths and widths shall be read to the

39、nearest millimetre. Key l length b width Figure 1 Positions for measuring length and width of a test specimen, where both l and b 1,5 mDIN EN 822:2013-05 EN 822:2013 (E) 7 Key b mean value of all measured values of width Figure 2 Positions for measuring length and width of a test specimen, where l 4

40、,5 m and b 1,5 m 8 Calculation and expression of results The length and width shall be expressed in millimetres, to the nearest millimetre, as the mean value for each test specimen. For products 3 m in length or greater, the length value shall be rounded to the nearest 5 mm. 9 Accuracy of measuremen

41、t NOTE It has not been possible to include a statement of the accuracy of the method in this edition of the standard, but it is intended to include such a statement when the standard is next revised. 10 Test report The test report shall include the following information: a) reference to this Europea

42、n Standard; b) product identification: 1) product name, factory, manufacturer or supplier; 2) production code number; 3) type of product; 4) packaging; 5) the form in which the product arrived at the laboratory; 6) other information as appropriate, e.g. nominal thickness, nominal density; c) test pr

43、ocedure: 1) pre-test history and sampling (e.g. who sampled and place of sampling); DIN EN 822:2013-05 EN 822:2013 (E) 8 2) conditioning; 3) deviations from Clauses 6 and 7, if any; 4) date of test; 5) general information relating to the test; 6) any occurrences which may have affected the results. Information about the apparatus and identity of the technician should be available in the laboratory, but it need not be recorded in the report; d) results: all individual values and the mean value for each dimension. DIN EN 822:2013-05 EN 822:2013 (E)