1、April 2008DEUTSCHE NORM English price group 8No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.30!$NM6“1434219www
2、.din.deDDIN EN 934-1Admixtures for concrete, mortar and grout Part 1: Common requirementsEnglish version of DIN EN 934-1:2008-04Zusatzmittel fr Beton, Mrtel und Einpressmrtel Teil 1: Gemeinsame AnforderungenEnglische Fassung DIN EN 934-1:2008-04www.beuth.deDocument comprises 12 pagesDIN EN 934-1:200
3、8-04 2 National foreword This standard has been prepared by Technical Committee CEN/TC 104 “Concrete and related products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Techn
4、ical Committee NA 005-07-23 AA Betonzusatzmittel. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 934-1January 2008ICS 91.100.30English VersionAdmixtures for concrete, mortar and grout - Part 1: CommonrequirementsExigences communesZusatzmittel fr Beton, Mrtel und Einpressmrtel - Teil 1:Gemeinsame
5、AnforderungenThis European Standard was approved by CEN on 24 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliogr
6、aphical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a C
7、EN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Ita
8、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 B
9、russels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 934-1:2008: EAdjuvants pour bton, mortier et coulis - Partie 1:EN 934-1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and De
10、finitions .6 4 General requirements6 5 Corrosion behaviour .8 5.1 Testing and labelling .8 5.2 Test requirement8 6 Special requirements 8 Annex A (normative) Approved and declared lists for corrosion behaviour9 A.1 Approved list 9 A.2 Declared list10 DIN EN 934-1:2008-04 EN 934-1:2008 (E) 3 Foreword
11、 This document (EN 934-1:2008) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the l
12、atest by July 2008, and conflicting national standards shall be withdrawn at the latest by July 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such
13、 patent rights. This standard is part of the series EN 934 “Admixtures for concrete, mortar and grout”, which is comprised of the following additional parts: - Part 2 Concrete admixtures Definitions, requirements, conformity, marking and labelling - Part 3 Admixtures for masonry mortar Definitions,
14、requirements, conformity, marking and labelling - Part 4 Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling - Part 5 Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling - Part 6 Sampling, conformity
15、control and evaluation of conformity This draft European Standard is used with the standards of the EN 480 series which comprises the test methods for admixtures. This standard has been prepared under a mandate issued to CEN by the European Commission and the European Free Trade Association and supp
16、orts essential requirements of the Construction Products Directive. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia,
17、Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 934-1:2008-04 EN 934-1:2008 (E) 4 Introduction This European Standar
18、d covers the requirements that are common to all admixtures. The general requirements replace those which were previously included in EN 934 parts 2 to 5. They include the requirements for the effect on corrosion behaviour when admixtures are used in concrete, mortar or grout containing embedded met
19、al. The requirements for corrosion behaviour in this standard include an approved list and a declared list of active substances used in some admixtures. These lists are based on experience, which shows that the use of admixtures only containing substances on the approved list do not promote the corr
20、osion of embedded steel. Materials on the declared list are subject, in some countries, to national restrictions on their use for certain applications and should be declared on the CE mark. The specific requirements that characterise the performance of an admixture in a cementitous mix are detailed
21、in EN 934 parts 2 to 5. The special requirements are new and relate to specific uses of admixtures and/or their effect on the environment. It is anticipated that, in the future, special requirements will result from European legislation and, for example, will be applicable to admixtures used in conc
22、rete or mortar in contact with drinking water and to the release of dangerous regulated substances. DIN EN 934-1:2008-04 EN 934-1:2008 (E) 5 1 Scope This European Standard specifies the common requirements for all admixtures covered by EN 934-2, EN 934-3, EN 934-4 and EN 934-5, which contain the spe
23、cific requirements for each type of admixture. The requirements for corrosion behaviour are not applicable to chloride based admixtures. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited appl
24、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-2, Methods of testing cement - Part 2: Chemical analysis of cement EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements EN 206-1:2000, Co
25、ncrete - Part 1: Specification, performance, production and conformity EN 480-6, Admixtures for concrete, mortar and grout Test methods Part 6: Infrared analysis EN 480-8, Admixtures for concrete, mortar and grout Test methods Part 8: Determination of the conventional dry material content EN 480-10,
26、 Admixtures for concrete, mortar and grout Test methods Part 10: Determination of the water soluble chloride content EN 480-12, Admixtures for concrete, mortar and grout Test methods Part 12: Determination of the alkali content of admixtures EN 480-14, Admixtures for concrete, mortar and grout Test
27、methods Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test EN 934-2, Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labelling EN 934-3, Admixtures fo
28、r concrete, mortar and grout Part 3: Admixtures for masonry mortar Definitions, requirements, conformity, marking and labelling EN 934-4, Admixtures for concrete, mortar and grout Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling EN
29、934-5, Admixtures for concrete, mortar and grout Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling EN ISO 1158, Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998) ISO 758, Liquid chemical prod
30、ucts for industrial use Determination of density at 20degreesC ISO 4316, Surface active agents Determination of pH of aqueous solutions Potentiometric method DIN EN 934-1:2008-04 EN 934-1:2008 (E) 6 3 Terms and Definitions For the purposes of the document, the following terms and definitions apply.
31、3.1 common requirements requirements that apply to all admixtures within the scope of EN 934-2, EN 934-3, EN 934-4 and EN 934-5 3.2 general requirements requirements that characterise the admixture by physical and chemical measurements and that apply to all admixtures within the scope of EN 934-2, E
32、N 934-3, EN 934-4 and EN 934-5 3.3 specific requirements requirements detailed in EN 934-2, EN 934-3, EN 934-4 or EN 934-5, which characterise the performance of the admixture in a cementitious mix 3.4 special requirements requirements which apply to admixtures within the scope of EN 934-2, EN 934-3
33、, EN 934-4 and EN 934-5 in relation to their effect on the environment or when used for specific applications 3.5 approved list list of substances used as ingredients in admixtures that are accepted for use without the need for further testing in relation to the property stated in the list NOTE Appr
34、oved lists are specific to a requirement detailed in this standard. 3.6 declared list list of substances used as ingredients in admixtures that do not have to be tested in relation to the property stated in the list but have to be declared because, in some countries, they are subject to national res
35、trictions on their use for certain applications 4 General requirements All admixtures within the scope of EN 934-2, EN 934-3, EN 934-4 and EN 934-5 shall conform to the requirements of Table 1. DIN EN 934-1:2008-04 EN 934-1:2008 (E) 7 Table 1 General requirements Property Test method Requirements 1
36、HomogeneityaVisual Homogeneous when used. Segregation shall not exceed the limit stated by the manufacturer. 2 ColouraVisual Uniform and similar to the description declared by the manufacturer. 3 Effective componentaEN 480-6bInfra red spectra to show no significant change with respect to the effecti
37、ve component when compared to the reference spectrum provided by the manufacturer. 4 Absolute densitya (for liquid admixtures only) ISO 758cD 0,03 if D 1,10 kg/l D 0,02 if D 1,10 kg/lwhere D is manufacturers stated value of density. 5 Conventional dry material contentaEN 480-8d0,95T X 1,05T if T 20
38、% 0,90T X 1,10T if T 20 % T is manufacturers stated value % by mass; X is test result % by mass. 6 pH valuea(for liquid admixtures only) ISO 4316 Manufacturers stated value 1 or within manufacturers stated range. 7 Total chlorinea fEN ISO 1158gEither 0,10 % by masseor not above manufacturers stated
39、value. 8 Water soluble chlorideaEN 480-10 Either 0,10 % by masseor not above manufacturers stated value. 9 Alkali content (Na2O equivalent)aEN 480-12 Not above manufacturers stated maximum value in % by mass. 10 Corrosion behaviour EN 480-14 See clause 5. 11 Silicon dioxide SiO2contenta h iEN 196-2
40、(procedure 13) Not above manufacturers stated maximum value in % by mass. 0 aManufacturers stated values and characteristics shall be provided in writing to the user upon request. bIf the method in EN 480-6 is not suitable, the manufacturer shall specify a documented alternative test method. cISO 75
41、8 is the reference method. Another method may be used provided that it can show essentially the same results as the method in ISO 758. dIf the method in EN 480-8 is not suitable, the manufacturer shall specify a documented alternative test method. eWhere the chloride content is 0,10 % by mass the ad
42、mixture may be described as “chloride free”. fIf there is no significant difference between the total chlorine and the water soluble chloride content, only the water soluble chloride content should be determined in subsequent tests on the admixture involved. gThe procedure in EN ISO 1158 shall be mo
43、dified as follows: - Increase the sample size in method B to 0,1 g of dry admixture; - Use silver nitrate and ammonium thiocyanate solutions at 0,01 N. hThe silicon dioxide content is only required when silica (see A.1) is a constituent intended to exceed 5 % by mass of the admixture. I This require
44、ment does not apply to natural sand. DIN EN 934-1:2008-04 EN 934-1:2008 (E) 8 5 Corrosion behaviour 5.1 Testing and labelling No testing for corrosion behaviour is required for admixtures containing only substances on the approved list A.1 and declared list A.2. Admixtures containing any substances
45、not on the approved list A.1 or declared list A.2 shall be tested in accordance with EN 480-14 and meet the test requirement in 5.2. Admixtures containing substances on the declared list A.2 shall have the names of the substances declared on the label. NOTE For admixtures containing chloride and chl
46、orine the requirements of Table 1, rows 7 and 8 apply. 5.2 Test requirement When tested in accordance with EN 480-14 the calculated current density of each of three test mix specimens shall not exceed 10 A/cm2at any time between 1 h and 24 h. In addition there shall be a similar trend in the progres
47、sion of the current density vs. time curves for the control mix and the test mix. 6 Special requirements NOTE Special requirements are currently being drafted by an Expert Group of the European Commission responsible for Construction Products in contact with Drinking Water. The requirements for admi
48、xtures, which are sold into concrete for drinking water applications, will be added to this European standard by amendment when they become available. DIN EN 934-1:2008-04 EN 934-1:2008 (E) 9 Annex A (normative) Approved and declared lists for corrosion behaviour A.1 Approved list Acetates Melamine
49、formaldehyde sulfonate Alkanolamine Natural resins and salts thereof Anionic and cationic lattices Naphthalene formaldehyde sulfonate Aluminates Phosphonic acid and salts thereof Aluminium powder Phosphates Benzoates Poly acrylate (acrylic ester polymers) Borates Poly carboxylate polymers Carbonates Poly carboxylate ethers Citrates PolysaccharidesCellulose and cellulose ethers Poly ethers Ethoxylated amines Polyvinyls and their derivatives Fatty acids and fatty acid salts/esters Saccharose Fillers
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1