DIN EN 998-2-2017 Specification for mortar for masonry - Part 2 Masonry mortar German version EN 998-2 2016《砌筑砂浆规范 第2部分 砌筑砂浆 德文版本EN 998-2-2016》.pdf

1、February 2017 English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.10!%an|“2627589www.din.d

2、eDIN EN 998-2Specification for mortar for masonry Part 2: Masonry mortar;English version EN 9982:2016,English translation of DIN EN 998-2:2017-02Festlegungen fr Mrtel im Mauerwerksbau Teil 2: Mauermrtel;Englische Fassung EN 9982:2016,Englische bersetzung von DIN EN 998-2:2017-02Dfinitions et spcific

3、ations des mortiers pour maonnerie Partie 2: Mortiers de montage des lments de maonnerie;Version anglaise EN 9982:2016,Traduction anglaise de DIN EN 998-2:2017-02SupersedesDIN EN 9982:201012See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language o

4、riginal shall be considered authoritative.Document comprises 30 pages 02.17 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2017-02-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted onc

5、e this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building author

6、ity. The standard which this document replaces, DIN EN 998-2:2010-12, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This

7、 document (EN 998-2:2016) has been prepared by Technical Committee CEN/TC 125 “Masonry” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-06-0

8、3 AA Mauermrtel (SpA zu CEN/TC 125/WG 2). Amendments This standard differs from DIN EN 998-2:2010-12 as follows: a) the new regulatory (CPR) terminology has been implemented where relevant; b) subclause 5.4.2.2 regarding “Flexural bond strength” (derived from a Finnish query) has been added; c) the

9、paragraph regarding “Assessment and Verification of the Constancy of Performance (AVCP)” has been modified; d) a new explanatory note has been added to the tabulated values in Annex C; e) a new annex with indicative frequencies on testing for factory production control (informative) has been added;

10、f) Annex ZA (informative) has been revised; g) some minor editorial changes have been made. Previous editions DIN 1053: 1937x-02, 1952-12, 1962-11 DIN 1053-1: 1974-11, 1990-02, 1996-11 DIN 18557: 1982-05, 1997-11 DIN EN 998-2: 2003-09, 2010-12 DIN EN 998-2:2017-02 EUROPEAN STANDARD NORME EUROPENNE E

11、UROPISCHE NORM EN 998-2 November 2016 ICS 91.100.10 Supersedes EN 998-2:2010English Version Specification for mortar for masonry - Part 2: Masonry mortar Dfinitions et spcifications des mortiers pour maonnerie - Partie 2: Mortiers de montage des lments de maonnerie Festlegungen fr Mrtel im Mauerwerk

12、sbau - Teil 2: Mauermrtel This European Standard was approved by CEN on 9 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

13、and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th

14、e responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos

15、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN

16、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 998-2:2016 EEN 998-2:2016 (E) 2 Contents Page European foreword .

17、 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 8 4 Materials 10 5 Product characteristics 10 5.1 General . 10 5.2 Characteristics of fresh mortar . 11 5.2.1 Workable life . 11 5.2.2 Chloride content . 11 5.2.3 Air content 11 5.3 Proportion of constituents 11 5.4 Chara

18、cteristics of hardened mortar 11 5.4.1 Compressive strength . 11 5.4.2 Bond strength 12 5.4.3 Water absorption . 13 5.4.4 Water vapour permeability 13 5.4.5 Density (dry hardened mortar) 13 5.4.6 Thermal conductivity . 13 5.4.7 Durability 13 5.4.8 Reaction to fire 13 5.4.9 Dangerous substances 13 5.

19、5 Additional requirements for thin layer mortars 14 5.5.1 General . 14 5.5.2 Aggregates 14 5.5.3 Correction time . 14 5.6 Mixing of mortar on site 14 6 Designation of masonry mortar 14 7 Marking and labelling . 15 8 Assessment and verification of constancy of performance (AVCP) . 15 8.1 General . 15

20、 8.2 Product-type determination 15 8.2.1 General . 15 8.2.2 Sampling 16 8.2.3 Reference test 16 8.2.4 Repeating of product-type determination 16 8.2.5 Recording 16 8.2.6 Application of test methods 16 8.3 Factory Production Control, FPC 16 8.3.1 General . 16 8.3.2 Process control 16 DIN EN 998-2:201

21、7-02 EN 998-2:2016 (E) 3 8.3.3 Finished product conformity 17 8.3.4 Statistical techniques 17 8.3.5 Traceability marking and stock control of products 17 8.3.6 Non-conforming products . 18 Annex A (normative) Sampling for product-type determination and independent testing of consignments . 19 A.1 Ge

22、neral . 19 A.2 Sampling procedure 19 Annex B (informative) Use of masonry units and masonry mortar 20 Annex C (normative) Characteristic initial shear strength of designed masonry mortars. 22 Annex D (informative) Indicative test frequencies for Factory Production Control (FPC) . 23 Annex ZA (inform

23、ative) Relationship of this European Standard with Regulation (EU) No.305/2011 25 ZA.1 Scope and relevant characteristics 25 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 26 ZA.3 Assignment of AVCP tasks . 26 Bibliography . 28 DIN EN 998-2:2017-02 EN 998-2:2016 (E) 4

24、European foreword This document (EN 998-2:2016) has been prepared by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This document supersedes EN 998-2:2010. This European Standard shall be given the status of a national standard, either by publication of an identic

25、al text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by August 2018. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports basic requirements fo

26、r construction works of the EU Construction Products Regulation (Regulation (EU) No 305/2011). It also takes into account the general rules for reinforced and unreinforced masonry in Eurocode 6. For relationship with EU Regulation, see informative Annex ZA, which is an integral part of this document

27、. The most significant changes compared to the previous edition include: a) implementation of new regulatory (CPR) terminology where relevant; b) new subclause 5.4.2.2 on Flexural bond strength (deriving from Finnish legal query); c) revised clauses on Assessment and verification of constancy of per

28、formance (AVCP); d) new explanatory note added to tabulated values in Annex C; e) new annex with indicative frequencies on testing for factory production control (informative); f) revised Annex ZA (informative); g) some minor editorial changes. No changes to existing technical classes and/or thresho

29、ld levels have been made. EN 998, Specification for mortar for masonry consists of: Part 1: Rendering and plastering mortar; Part 2: Masonry mortar. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be h

30、eld responsible for identifying any or all such patent rights. DIN EN 998-2:2017-02 EN 998-2:2016 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croati

31、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

32、 United Kingdom. DIN EN 998-2:2017-02 EN 998-2:2016 (E) 6 Introduction The characteristics required of a mortar are related to its use. They are considered in two groups, namely those relating to the fresh, unhardened mortar and those to the hardened mortar. DIN EN 998-2:2017-02 EN 998-2:2016 (E) 7

33、1 Scope This European Standard specifies requirements for factory-made masonry mortars (bedding, jointing and pointing) for use in masonry walls, columns and partitions (e.g. facing and rendered masonry, load bearing or non-load bearing masonry structures for buildings and civil engineering works).

34、This European Standard defines for fresh mortar the performance related to workable life, chloride content, air content, density and correction time (for thin-layer mortar only). For hardened mortar it defines, e.g. performance related to compressive strength, bond strength, density measured accordi

35、ng to the corresponding test methods contained in separate European Standards. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is in

36、cluded. This European Standard covers masonry mortars defined in Clause 3 with the exception of site made mortar. However, this European Standard or part of this European Standard may be used in conjunction with codes of application and national specifications covering site made mortar. 2 Normative

37、references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appli

38、es. EN 771 (all parts), Specification for masonry units EN 1015-1, Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) EN 1015-2, Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars EN

39、1015-7, Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar EN 1015-9, Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar EN 1015-10, Methods of test for mortar for masonry - Part 10: Determina

40、tion of dry bulk density of hardened mortar EN 1015-11, Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar EN 1015-17, Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mort

41、ars EN 1015-18, Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar EN 1052-3, Methods of test for masonry - Part 3: Determination of initial shear strength EN 1052-5, Methods of test for masonry - Part 5: Determi

42、nation of bond strength by the bond wrench method DIN EN 998-2:2017-02 EN 998-2:2016 (E) 8 EN 1745:2012, Masonry and masonry products - Methods for determining thermal properties EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using test data fro

43、m reaction to fire tests 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 masonry mortar mix of one or more inorganic binders, aggregates, water, and sometimes additions and/or admixtures for bedding, jointing and pointing of masonry 3.2 fresh

44、 masonry mortar mortar completely mixed and ready for use 3.3 Type of masonry mortar, defined according to concept 3.3.1 designed masonry mortar mortar whose composition and manufacturing method is chosen by the producer in order to achieve specified properties (performance concept) 3.3.2 prescribed

45、 masonry mortar mortar made in predetermined proportions, the properties of which are assumed from the stated proportion of the constituents (recipe concept) 3.4 Type of masonry mortar, defined according to properties and/or use 3.4.1 general purpose masonry mortar (G) masonry mortar without special

46、 characteristics 3.4.2 thin layer masonry mortar (T) designed masonry mortar with a maximum aggregate size less than or equal to a prescribed figure (see 5.5.2) 3.4.3 lightweight masonry mortar (L) designed masonry mortar with a dry hardened density below a prescribed figure (see 5.4.5) DIN EN 998-2

47、:2017-02 EN 998-2:2016 (E) 9 3.5 Type of masonry mortar, defined according to the mode of manufacture 3.5.1 factory-made masonry mortar mortar batched and mixed in a factory Note 1 to entry: It can be “dry mortar“ which is ready-mixed, only requiring the addition of water or “wet mortar“ which is su

48、pplied ready for use. 3.5.2 semi-finished factory made masonry mortar mortar described in either 3.5.2.1 or 3.5.2.2 3.5.2.1 pre-batched masonry mortar mortar whose constituents are wholly batched in a factory, supplied to the building site and mixed there according to the manufacturers specification

49、 and conditions 3.5.2.2 premixed lime-sand- masonry mortar mortar whose constituents are wholly batched and mixed in a factory, supplied to the building site where further constituents specified or provided by the factory are added (e.g. cement) 3.5.3 site-made masonry mortar mortar composed of individual constituents batched and mixed on the building site 3.6 binder material used to hold solid particles together in a coherent mass, e.g. cement, building lime 3.7 agg