DIN EN 15947-3-2016 Pyrotechnic articles - Fireworks Categories F1 F2 and F3 - Part 3 Minimum labelling requirements German version EN 15947-3 2015《烟火条款 F1类 F2类和F3类烟火 第3部分 最小标签要求 德.pdf

1、February 2016 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71.100.30!%LS?“2414828www.din.d

2、eDIN EN 15947-3Pyrotechnic articles Fireworks, Categories F1, F2, and F3 Part 3: Minimum labelling requirements;English version EN 15947-3:2015,English translation of DIN EN 15947-3:2016-02Pyrotechnische Gegenstnde Feuerwerkskrper, Kategorien F1, F2 und F3 Teil 3: Mindestanforderungen an die Kennzei

3、chnung;Englische Fassung EN 15947-3:2015,Englische bersetzung von DIN EN 15947-3:2016-02Articles pyrotechniques Artifices de divertissement, Catgories F1, F2 et F3 Partie 3: tiquetage minimal;Version anglaise EN 15947-3:2015,Traduction anglaise de DIN EN 15947-3:2016-02SupersedesDIN EN 15947-3:2010-

4、12www.beuth.deDocument comprises 33 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.03.16 DIN EN 15947-3:2016-02 2 A comma is used as the decimal marker. National foreword This document (EN 15947-3:2015) has been prepared by Te

5、chnical Committee CEN/TC 212 “Pyrotechnic articles” (Secretariat: NEN, Netherlands). The responsible German body involved in its preparation was DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-08-81 AA Pyrotechnische Gegenstnde. The Committee

6、would like to bring attention to the fact that the following legal provisions should be observed when applying DIN EN 15947-3 in Germany: null Gesetz ber explosionsgefhrliche Stoffe (Sprengstoffgesetz SprengG) (German Explosives Act) of 10 September 2002 (BGBl. I p. 3518), as amended by Article 626,

7、 Paragraph 4 of the Act of 31 August 2015 (BGBI. I, p. 1474) null Erste Verordnung zum Sprengstoffgesetz (1. SprengV) (First Ordinance on the Explosives Act) of 31 January 1991 (BGBl. I, p. 169), as amended by Article 290 of the Act of 31 August 2015 (BGBI. I, p. 1474)*). Amendments This standard di

8、ffers from DIN EN 15947-3:2010-12 as follows: a) a distinction has been made between the firework types “battery” and “battery requiring external support” as well as between “combination” and “combination requiring external support”, and specific requirements for these types have been specified; b)

9、type “compound firework” has been added and the specific requirements for this type have been specified; c) the standard has been editorially revised. Previous editions DIN EN 14035-3: 2004-11 DIN EN 14035-4: 2003-09 DIN EN 14035-4 Corrigendum 1: 2005-07 DIN EN 14035-5: 2006-05 DIN EN 14035-6: 2004-

10、11 DIN EN 14035-7: 2004-11 DIN EN 14035-8: 2004-11 DIN EN 14035-9: 2004-11 DIN EN 14035-10: 2004-11 *) Registered in the DITR database of DIN Software GmbH, obtainable from: Beuth Verlag GmbH, 10772 Berlin. DIN EN 15947-3:2016-02 3 DIN EN 14035-12: 2003-09 DIN EN 14035-12 Corrigendum 1: 2005-07 DIN

11、EN 14035-13: 2004-11 DIN EN 14035-15: 2003-09 DIN EN 14035-15 Corrigendum 1: 2005-07 DIN EN 14035-17: 2004-11 DIN EN 14035-18: 2005-03 DIN EN 14035-19: 2003-09 DIN EN 14035-19 Corrigendum 1: 2006-08 DIN EN 14035-20: 2005-06 DIN EN 14035-21: 2006-01 DIN EN 14035-22: 2004-11 DIN EN 14035-23: 2003-09 D

12、IN EN 14035-23 Corrigendum 1: 2005-07 DIN EN 14035-24: 2004-11 DIN EN 14035-25: 2006-01 DIN EN 14035-27: 2003-09 DIN EN 14035-27 Corrigendum 1: 2005-07 DIN EN 14035-28: 2004-11 DIN EN 14035-29: 2004-11 DIN EN 14035-31: 2006-01 DIN EN 14035-33: 2006-01 DIN EN 14035-34: 2003-09 DIN EN 14035-34 Corrige

13、ndum 1: 2005-07 DIN EN 14035-35: 2005-02 DIN EN 14035-36: 2004-11 DIN EN 14035-38: 2006-05 DIN EN 15947-3: 2010-12 DIN EN 15947-3:2016-02 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15947-3 December 2015 ICS 71.100.30 Supersedes EN 15947-3:2010English Vers

14、ion Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 -Part 3: Minimum labelling requirements Articles pyrotechniques - Artifices de divertissement, Catgories F1, F2 et F3 - Partie 3: tiquetage minimalPyrotechnische Gegenstnde - Feuerwerkskrper, Kategorien F1, F2 und F3 - Teil 3: Mindestan

15、forderungen an die Kennzeichnung This European Standard was approved by CEN on 26 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to

16、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat

17、ion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,

18、Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO

19、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15947-3:2015 EEN 15947-3:2015 (E) 2 Contents Page Eur

20、opean foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Minimum labelling requirements . 4 4.1 General and specific labelling requirements 4 4.1.1 General labelling requirements . 4 4.1.2 Specific labelling requirement for batteries, batteries requiring external support,

21、combinations and combinations requiring external support 5 4.1.3 Specific labelling requirements for compound fireworks . 5 4.2 Type of firework, category, CE marking and registration number . 5 4.3 Minimum age limits 6 4.4 Net explosive content 6 4.5 Year of production 6 4.6 Safety information 6 4.

22、7 Details of manufacturer or importer . 7 4.8 Printing . 7 4.9 Marking of very small items 7 4.10 Additional information . 7 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2013/29/EU on the harmonization of the laws of the Member Sta

23、tes relating to the making available on the market of pyrotechnic articles 28 Bibliography . 29 DIN EN 15947-3:2016-02 EN 15947-3:2015 (E) 3 European foreword This document (EN 15947-3:2015) has been prepared by Technical Committee CEN/TC 212 “Pyrotechnic articles”, the secretariat of which is held

24、by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some

25、 of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15947-3:2010. This document has been prepared under a mandate given to CEN by the European Commission and

26、 the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is one of the series of standards as listed below: EN 15947-1, Pyrotechnic

27、 articles Fireworks, Categories F1, F2 and F3 Part 1: Terminology; EN 15947-2, Pyrotechnic articles Fireworks, Categories F1, F2 and F3 Part 2: Categories and types of firework; EN 15947-3, Pyrotechnic articles Fireworks, Categories F1, F2 and F3 Part 3: Minimum labelling requirements; EN 15947-4, P

28、yrotechnic articles Fireworks, Categories F1, F2 and F3 Part 4: Test methods; EN 15947-5, Pyrotechnic articles Fireworks, Categories F1, F2 and F3 Part 5: Requirements for construction and performance. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the fol

29、lowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

30、 Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15947-3:2016-02 EN 15947-3:2015 (E) 4 1 Scope This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks. It

31、is applicable to fireworks in categories F1, F2 and F3 according to EN 15947-2:2015. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For u

32、ndated references, the latest edition of the referenced document (including any amendments) applies. EN 15947-1:2015, Pyrotechnic articles Fireworks, Categories F1, F2 and F3 Part 1: Terminology EN 15947-2:2015, Pyrotechnic articles Fireworks, Categories F1, F2 and F3 Part 2: Categories and types of

33、 firework EN 15947-4:2015, Pyrotechnic articles Fireworks, Categories F1, F2 and F3 Part 4: Test methods 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15947-1:2015 apply. 4 Minimum labelling requirements 4.1 General and specific labelling requiremen

34、ts 4.1.1 General labelling requirements Fireworks shall be marked in accordance with 4.9 and 4.10, with the information specified in 4.1.2 and 4.1.3 (if applicable) and 4.2 to 4.8. Primary packs, if any, shall be marked with the information specified in 4.2 to 4.8 and 4.10. For the following firewor

35、ks, where the use of a primary pack is mandatory, the marking shall be applied solely to the primary pack: Bengal matches; Bengal sticks; Christmas crackers; compound fireworks; crackling granules; flash pellets; hand-held sparklers; jumping crackers; DIN EN 15947-3:2016-02 EN 15947-3:2015 (E) 5 non

36、-hand-held sparklers; novelty matches; serpents; snaps; throwdowns. The specified information shall be given in the official language(s) of the country in which the fireworks or primary packs are offered for retail sale. For each language, it shall be presented as a whole and shall not be interrupte

37、d by other text. Additional text given in another language shall not conflict with the specified information. Conformity to these requirements specified in 4.1 to 4.10 shall be verified by visual examination. 4.1.2 Specific labelling requirement for batteries, batteries requiring external support, c

38、ombinations and combinations requiring external support For batteries, batteries requiring external support, combinations and combinations requiring external support equipped with two initial fuses the reserve fuse shall be clearly marked with the words “RESERVE FUSE”. 4.1.3 Specific labelling requi

39、rements for compound fireworks The compound fireworks shall be labelled on the primary pack according to the requirements of 4.2 to 4.10. The label of the primary pack shall identify all included articles used in the compound fireworks according to 4.2. For compound fireworks with two initial fuses

40、the reserve fuse shall be clearly marked with the words “RESERVE FUSE”. Fireworks which are assembled in compound fireworks shall not be labelled with the information according to 4.3 and the safety information according to 4.6. 4.2 Type of firework, category, CE marking and registration number The

41、type of firework shall be marked, in upper case, in conformity with EN 15947-2:2015. If a trade name is used in addition to the type name, it shall not conflict with the principal effects of the relevant type of firework or with the name of another type of firework. For Roman candles the number of s

42、hots shall be marked, e.g. “8 SHOT ROMAN CANDLE”. The category shall be marked, in upper case, as “CATEGORY F2” or “CAT F2”, for example. The registration number for tracing of products shall be marked in accordance with the example below: XXXX YY ZZZZ where XXXX refers to the registration number of

43、 the notified body issuing the certificate, YY refers to the category of firework in abbreviated format (F1, F2, or F3 for category F1, F2, or F3 respectively), and where ZZZZ is a processing number used by the notified body. According to Regulation (EC) No 765/2008 the CE marking shall be applied t

44、o the label. The minimum height of the CE marking shall be 5 mm. According to Directive 2013/29/EU Art. 8(2) and 20(3) CE-marking is followed by the identification number of the Notified Body responsible for: monitoring the existing quality system (in case of Modules D and E); and/or DIN EN 15947-3:

45、2016-02 EN 15947-3:2015 (E) 6 checking conformity to type according to Module C2 (where the notified body intervened during the manufacturing phase). Selection packs containing one or more categories shall be marked with the highest category in the pack, e.g. “CAT F3”. NOTE Directive 2013/29/EU Art.

46、 10 requires further labelling of pyrotechnic articles other than pyrotechnic articles for vehicles. 4.3 Minimum age limits The minimum age limits applicable in the country in which the fireworks are offered for retail sale shall be clearly stated on the label. The following minimum age limits apply

47、, if the individual Member State has not raised these age limits according to Directive 2013/29/EU Art. Seven 2. The following minimum age limits apply: Category F1: 12 years; Category F2: 16 years; Category F3: 18 years. 4.4 Net explosive content The labelling shall include the net explosive conten

48、t of the firework. For fireworks, where the use of a primary pack is mandatory (see 4.1.1) and for fireworks not labelled completely with the information specified in 4.2 to 4.7 the total net explosive content of the items in the primary pack shall be given on the primary pack. The abbreviation for

49、the net explosive content (NEC) may be used for the labelling. 4.5 Year of production For category F3 fireworks the year of production shall be clearly stated on the bottom right hand corner of the label, either by four or by two digits, e.g. “2015” or “15”. 4.6 Safety information The labelling shall include at least the safety information specified in Table 1, in a logical sequence, for the re