1、October 2012 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 97.195!$y“1919886www.din.deDDIN EN 16096Conservation of cultural property Condition survey and report of built cultural heritage;English version EN 16096:2012,English translation of DIN EN 16096:2012-10Erhaltung des kulturellen Erbes Zustandserhebung und Bericht fr das gebaute Kulturerbe;Englische
3、 Fassung EN 16096:2012,Englische bersetzung von DIN EN 16096:2012-10Conservation des biens culturels valuation et rapport sur ltat du patrimoine culturel bti;Version anglaise EN 16096:2012,Traduction anglaise de DIN EN 16096:2012-10www.beuth.deDocument comprises 26 pagesIn case of doubt, the German-
4、language original shall be considered authoritative.09.12 DIN EN 16096:2012-10 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 346 “Conservation of cultural property” (Secretariat: UNI, Italy). The responsible German body invol
5、ved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-01-36 AA Erhaltung des kulturellen Erbes (SpA zu CEN/TC 346). EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16096 August 2012 ICS 97.195 English Version Conse
6、rvation of cultural property - Condition survey and report of built cultural heritage Conservation des biens culturels - valuation et rapport sur ltat du patrimoine culturel bti Erhaltung des kulturellen Erbes - Zustandserhebung und Bericht fr das gebaute Kulturerbe This European Standard was approv
7、ed by CEN on 23 June 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national sta
8、ndards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and
9、notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary
10、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management
11、Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16096:2012: EEN 16096:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Con
12、dition survey74.1 Objectives .74.2 Planning 74.2.1 Preparation .74.2.2 Qualifications of survey personnel 74.3 Property and cultural heritage information .84.3.1 General 84.3.2 Object information .84.3.3 Object description .84.3.4 Sources and management information .84.4 Recording the condition .94.
13、4.1 General 94.4.2 General information .94.4.3 Description of the condition 104.4.4 Condition classification . 104.5 Risk assessment and recommendations . 104.5.1 Risk assessment . 104.5.2 Recommendations 114.6 Summary 124.6.1 General . 124.6.2 The overall recommendation grading 124.7 Condition repo
14、rt 13Annex A (informative) Example of reporting form 14A.1 Object information 14A.2 Sources and management information 15A.3 General information for the condition survey . 16A.4 Building components and condition 17A.5 Recommendation 21A.6 Summary (reference to 4.6) . 22Bibliography . 23DIN EN 16096:
15、2012-10 EN 16096:2012 (E) 3 Foreword This document (EN 16096:2012) has been prepared by Technical Committee CEN/TC 346 “Conservation of cultural property”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an id
16、entical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be
17、held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto
18、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16096:2012-10 EN
19、 16096:2012 (E) 4 Introduction Knowledge and understanding of the material evidence of built cultural heritage and the information on its current state is important as it helps to specify measures necessary to preserve structures in an appropriate condition and ensure that the maintenance required t
20、o keep them at this level is well defined. Built cultural heritage in this document refers to standing structures which have an architectural, cultural or historical value. A condition survey is a management tool. This condition survey of structures and materials is the first step in a process to de
21、velop plans and measures needed to keep built cultural heritage in a stable well-maintained condition. It acts as the basis for recommending preventive conservation, maintenance and immediate repairs and for a more detailed planning and consideration for further measures or studies. When damage is d
22、etected and the causes are not evident, it will be necessary to carry out a more detailed investigation or diagnosis outside the remit of this standard in order to execute further remedial measures of an appropriate quality. Preventive conservation, regular condition surveys and maintenance is the b
23、est way to conserve and maintain the significance of built cultural heritage, while ensuring that its authenticity and integrity are retained. A combination of scientific, architectural, historic, structural and cultural knowledge and conservation experience of built cultural heritage is advisable i
24、n order to execute this survey. This European Standard is for use by the surveyor as requested by the end-user. The results are for use by the owner and/or the manager of the built cultural heritage. This does not preclude that the owner/manager may use this standard as a guide for assessing the con
25、dition. This European Standard has been prepared taking into account European and International conventions, charters, declarations and guidelines. References are given in the Bibliography. For the purposes of data management it is advisable to have a digital system. For decorative elements integrat
26、ed into the building (e.g. stained glass, mural paintings etc.) the condition survey may be extended by a condition report in accordance with EN 16095. Other standards for assessing the condition of built structures should be considered. DIN EN 16096:2012-10 EN 16096:2012 (E) 5 1 Scope This European
27、 Standard provides guidelines for a condition survey of built cultural heritage. It states how the condition of the built cultural heritage should be assessed, documented, recorded and reported on. It encompasses evaluation of the condition of a building or other structure mainly by visual observati
28、on, together when necessary with simple measurements. The relevant data and documentation on the built cultural heritage should be collected and included in the report. This European Standard can be applied to all built cultural heritage such as buildings, ruins, bridges and other standing structure
29、s. Built cultural heritage comprises both protected and non-protected significant buildings and structures. Archaeological sites and cultural landscapes are not dealt with in this standard. This European Standard does not specify how to carry out a diagnosis (3.7) of the built cultural heritage. For
30、 listed/protected immovable heritage, specific national rules for expert documentation and works may apply. This European Standard may be applied in order to: a) identify maintenance measures and the need for further investigation and diagnostics of damage; b) define procurement needs and the requir
31、ement for detailed specification; c) provide a unified method to obtain comparative data, when carrying out a condition survey for a group of buildings or a region. 2 Normative references Not applicable. 3 Terms and definitions For the purposes of this document, the following terms and definitions a
32、pply. 3.1 condition physical state of an object at a particular time Note 1 to entry: Assessment of the state of an object depends on the context and thus on the reason why the assessment is being made. SOURCE: EN 15898:2011 3.2 condition class categorisation of the condition 3.3 condition report re
33、cord of condition for a specific purpose, dated and authored Note 1 to entry: A condition report normally results from a condition survey. SOURCE: EN 15898:2011 DIN EN 16096:2012-10 EN 16096:2012 (E) 6 3.4 condition survey inspection to assess condition SOURCE: EN 15898:2011 3.5 cultural heritage ta
34、ngible and intangible entities of significance to present and future generations SOURCE: EN 15898:2011 3.6 damage alteration that reduces significance or stability Note 1 to entry: Stability can be physical, chemical, biological etc. Note 2 to entry: Although damage has negative connotations, it may
35、 sometimes be viewed as broadening significance. SOURCE: EN 15898:2011 3.7 diagnosis process of identifying the present condition of an object and determining the nature and causes of any change, as well as the conclusions drawn Note 1 to entry: Diagnosis is based on observation, investigation and h
36、istorical analysis etc. SOURCE: EN 15898:2011 3.8 investigation gathering of all information necessary for a conservation decision making process Note 1 to entry: This should include both qualitative and quantitative information. Note 2 to entry: Investigation is frequently invasive, entailing openi
37、ng up floors or roofs, the making of holes for fibre-optics, taking samples, etc., and may be locally destructive, as is archaeological excavation. Non-invasive methods include inspection, photogrammetry, remote sensing, the study of documentary and/or oral sources etc. SOURCE: EN 15898:2011 3.9 mai
38、ntenance periodic preventive conservation actions aimed at sustaining an object in an appropriate condition to retain its significance SOURCE: EN 15898:2011 3.10 object single manifestation of tangible cultural heritage Note 1 to entry: The term “object” is used for cultural heritage, both immovable
39、 and movable. In specific professional contexts, other terms are used: e.g. “artefact“, “cultural property“, “item”, “ensemble”, “site”, ”building”, “fabric”. SOURCE: EN 15898:2011 DIN EN 16096:2012-10 EN 16096:2012 (E) 7 3.11 preventive conservation measures and actions aimed at avoiding or minimiz
40、ing future damage, deterioration and loss and, consequently, any invasive intervention SOURCE: EN 15898:2011 3.12 repair actions applied to an object or part of it to recover its functionality and/or its appearance SOURCE: EN 15898:2011 3.13 symptom indicator of change in condition 4 Condition surve
41、y 4.1 Objectives The purpose of the survey is to assess, document and record the condition of built cultural heritage. The condition survey encompasses planning (4.2), property and cultural heritage information (4.3), recording the condition (4.4), making risk assessment and recommendations (4.5), d
42、ocumenting the summary (4.6) and condition report (4.7). 4.2 Planning 4.2.1 Preparation Before the survey of the built cultural heritage, the scope, the need for resources, the equipment and the format for recording (see Annex A) to be used, shall be clearly defined. The person(s) or institution who
43、 has commissioned the condition survey shall be identified in the report. Information on the property and the built cultural heritage shall be obtained during the planning stage. This shall form the basis for the condition survey. For large or complex sites consisting of multiple structures, the sur
44、veyor shall clearly define the structure(s) which are included in the survey. A system for identifying and locating the individual objects shall be included. When surveying a ruin, the purpose is to maintain it in its ruined state. This should be confirmed by the involved parties. The involved parti
45、es, natural persons or legal entities, shall be informed of the condition survey and the necessary permits for access to the entire built cultural heritage shall be obtained. Measures to guarantee the safety of the surveyor during inspection shall be specified. 4.2.2 Qualifications of survey personn
46、el Condition surveys on built cultural heritage should be performed by professionals. The surveyor(s) should have knowledge of traditional materials, construction techniques and decay processes. For larger and more complex surveys extended across various fields, interdisciplinary cooperation is nece
47、ssary for a condition survey. DIN EN 16096:2012-10 EN 16096:2012 (E) 8 NOTE In certain countries, specific accreditation schemes might exist which define the professional qualifications for the surveyor(s). 4.3 Property and cultural heritage information 4.3.1 General Information on the built cultura
48、l heritage, including legal information, shall be obtained. For regular inspections, it is appropriate to update the data from the previous inspection. NOTE Information can be obtained, for example, from the national cadastre/land registers, cultural heritage databases, cultural heritage administration, building authorities, the owner(s), and from the records of earlier work provided by relevant professionals. 4.3.2 Object information Object informatio
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1