1、August 2014 Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 03.120.10; 27.010; 91.140.01!%:,e“2230966www.din.deDDIN EN 16247-2Energy audits Part 2: Buildings;English version EN 16247-2:2014,English translation of DIN EN 16247-2:2014-08Energieaudits Teil 2: Gebude;Englische Fassung EN 16247-2:2014,Englische bersetzung von DIN EN 16247-2:2014-08Audits nergtiq
3、ues Partie 2: Btiments;Version anglaise EN 16247-2:2014,Traduction anglaise de DIN EN 16247-2:2014-08www.beuth.deDocument comprises 46 pagesIn case of doubt, the German-language original shall be considered authoritative.07.14DIN EN 16247-2:2014-08 2 A comma is used as the decimal marker. National f
4、oreword This document (EN 16247-2:2014) has been prepared by Technical Committee CEN/CLC/JWG 1 “Energy audits” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Grundlagen des Umweltschutzes (Principles of Environmental Protection Sta
5、ndards Committee), Working Committee NA 172-00-09 AA Energieeffizienz und Energiemanagement. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16247-2 May 2014 ICS 03.120.10; 27.010; 91.140.01 English version Energy audits - Part 2: Buildings Audits nergtiques - Partie 2 : Btiments Energieaudits
6、- Teil 2: Gebude This European Standard was approved by CEN on 27 May 2014. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list
7、s and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transl
8、ation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bul
9、garia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, T
10、urkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 16247-2:2014 E EN 16247-2:2014 (E) 2 Contents Page Fore
11、word . 4 0 Introduction . 5 1 Scope 6 2 Normative references . 6 3 Terms and definitions . 6 4 Quality requirements 8 4.1 Energy auditor . 8 4.1.1 Competency . 8 4.1.2 Confidentiality . 8 4.1.3 Objectivity 8 4.1.4 Transparency . 8 4.2 Energy audit process 8 5 Elements of the energy audit process 8 5
12、.1 Preliminary contact . 8 5.2 Start-up meeting 9 5.3 Collecting data 10 5.3.1 General . 10 5.3.2 Information request 10 5.3.3 Review of the available data 11 5.3.4 Preliminary data analysis . 11 5.4 Field work 12 5.4.1 Aim of field work . 12 5.4.2 Conduct 12 5.4.3 Site visits . 12 5.5 Analysis . 13
13、 5.5.1 General . 13 5.5.2 Energy breakdown 13 5.5.3 Energy performance indicators . 14 5.5.4 Energy efficiency improvement opportunities 14 5.6 Report . 14 5.6.1 General . 14 5.6.2 Content of report . 14 5.7 Final meeting . 15 Annex A (informative) Energy audit process flow diagram 16 Annex B (infor
14、mative) Examples of parties of an energy audit in buildings 17 Annex C (informative) Examples of the scope, aim and thoroughness of energy audits in buildings 18 Annex D (informative) Examples of checklists for energy audit field work in buildings 20 Annex E (informative) Examples of the analysis of
15、 energy use in buildings . 24 Annex F (informative) Examples of analysis checklists for energy audits in buildings . 28 Annex G (informative) Examples of energy performance indicators in buildings . 31 Annex H (informative) Examples of energy efficiency improvement opportunities in buildings 32 DIN
16、EN 16247-2:2014-08 EN 16247-2:2014 (E) 3 Annex I (informative) Examples of analysis and savings calculations in energy audits in buildings 33 Annex J (informative) Examples of the reporting of an energy audit in buildings 40 Annex K (informative) Example of energy improvement verification method in
17、buildings 42 Bibliography . 44 DIN EN 16247-2:2014-08 EN 16247-2:2014 (E) 4 Foreword This document (EN 16247-2:2014) has been prepared by Technical Committee CEN/CLC/JWG 1 “Energy audits”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standar
18、d, either by publication of an identical text or by endorsement, at the latest by November 2014 and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
19、CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This Part provides additional material to Part 1 for the Buildings sector and should be used in conjunction with Part 1. This European Standard is part of the series EN 16247 “Energy audits” which compris
20、es the following: Part 1 General requirements; Part 2 Buildings; Part 3 Processes; Part 4 Transport; Part 5 Competence of energy auditors. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:
21、 Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
22、Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16247-2:2014-08 EN 16247-2:2014 (E) 5 0 Introduction An energy audit can help an organization to identify opportunities to improve energy efficiency. It can be part of a site wide energy management system. The use and operation of buildings
23、requires the provision of services such as heating, cooling, ventilation, lighting, domestic hot water, transportation systems (e.g. elevators, escalators and moving walkways) in buildings and processes. In addition, energy is used by appliances within the building. The energy consumption depends on
24、: local climatic conditions; the characteristics of the building envelope; the designed indoor environment conditions; the characteristics and settings of the technical building systems; activities and processes in the building; occupant behaviour and operational regime. Dealing with buildings, the
25、audited objects are sometimes similar, technically simple and numerous (as in the residential sector) but can also be unique, complex and highly technical (such as hospitals, swimming pools and spas, etc.). Energy audits in buildings may include the whole building or parts of the building or some te
26、chnical system. Energy performance indicators (benchmark values, if available) or average statistical specific energy consumption data are usually published nationally for different building types and ages. This information can be used in the analysis to provide comparative energy performance evalua
27、tion. NOTE The energy audits covered under this standard might be independent from building energy performance certification and other legislative requirements. DIN EN 16247-2:2014-08 EN 16247-2:2014 (E) 6 1 Scope This European Standard is applicable to specific energy audit requirements in building
28、s. It specifies the requirements, methodology and deliverables of an energy audit in a building or group of buildings, excluding individual private dwellings. It shall be applied in conjunction with, and is supplementary to, EN 16247-1, Energy audits Part 1: General requirements. It provides additio
29、nal requirements to EN 16247-1 and shall be applied simultaneously. If processes are included in the scope of the energy audit, the energy auditor may choose to apply EN 16247-3, Energy audits Part 3: Processes. If on-site transport on a site is included in the scope of the energy audit, the energy
30、auditor may choose to apply EN 16247-4, Energy audits Part 4: Transport. NOTE This standard may cover multi-dwelling apartment blocks where communal services are supplied from a landlord. It is not intended for individual dwellings and single family houses. 2 Normative references The following docum
31、ents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16247-1, Energy audits
32、- Part 1: General requirements EN 15603, Energy performance of buildings - Overall energy use and definition of energy ratings 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 16247-1 and the following apply. 3.1 building construction as a who
33、le, including its envelope and all technical building systems, for which energy may be used to condition the indoor climate, to provide domestic hot water and illumination and other services related to the use of the building and the activities performed within the building Note 1 to entry: The term
34、 can refer to the building as a whole or to parts thereof that have been designed or altered to be used separately. Note 2 to entry: The building could include its site location and related external environment. 3.2 system boundary boundary that includes within it all areas associated with the audit
35、ed object (both inside and outside the audited object) where energy is consumed or produced Note 1 to entry: Inside the system boundary the system losses are taken into account explicitly, outside the system boundary they are taken into account in a conversion factor. DIN EN 16247-2:2014-08 EN 16247
36、-2:2014 (E) 7 3.3 energy need energy to be delivered to or extracted from a building in a defined time period by a technical system to provide a building service 3.4 energy carrier substance or physical phenomenon that can be used directly or indirectly to be transformed into useful energy Note 1 to
37、 entry: The default energy content of fuels is gross calorific value. 3.5 delivered energy (final energy) energy, expressed per energy carrier, supplied to the technical building systems through the system boundary, to satisfy the uses taken into account or to produce electricity Note 1 to entry: De
38、livered energy can be calculated for defined energy uses or it can be measured. Note 2 to entry: Energy uses include heating, cooling, ventilation, domestic hot water, lighting, appliances, etc. 3.6 produced energy heat or electricity generated within the system boundary Note 1 to entry: Produced en
39、ergy can be used within the system boundary or exported. 3.7 exported energy energy, expressed for each energy carrier, delivered by the technical building systems through the system boundary and used outside the system boundary Note 1 to entry: It can be specified by generation types (e.g. CHP, pho
40、tovoltaic, etc) in order to apply different weighting factors. Note 2 to entry: Exported energy can be calculated or it can be measured. SOURCE: CEN/TR 15615, 3.19 3.8 building services the services provided by the technical building systems and by appliances to condition the indoor environment (the
41、rmal comfort, air quality, visual and acoustic quality) and other services related to the use of the building 3.9 technical building system technical equipment for heating, cooling, ventilation, domestic hot water, lighting and on-site energy production Note 1 to entry: A technical building system c
42、an refer to one or a combination of building services (e.g. heating system include heating, domestic hot water system and controls). Note 2 to entry: A technical building system is composed of different subsystems and includes controls. Note 3 to entry: On-site energy production can include heat or
43、electricity. DIN EN 16247-2:2014-08 EN 16247-2:2014 (E) 8 4 Quality requirements 4.1 Energy auditor 4.1.1 Competency The energy auditor shall demonstrate that they have qualifications or experience covering the scope, complexity and thoroughness of the audit. NOTE See prEN 1624751. 4.1.2 Confidentia
44、lity The energy auditor shall respect all the legal and commercial confidentiality requirements agreed with the organization, which cover all parties involved, such as tenants, maintenance organizations, building occupants. 4.1.3 Objectivity Objectivity is defined in EN 16247-1, 4.1.3 4.1.4 Transpar
45、ency Transparency is defined in EN 16247-1, 4.1.4 4.2 Energy audit process When a sampling method is used, any selected sample of spaces, systems or equipment shall be representative of the whole building or of a group of buildings. NOTE See Informative Annex A: A flow diagram of the energy audit pr
46、ocess. 5 Elements of the energy audit process 5.1 Preliminary contact The energy auditor shall identify all parties/organizations and their roles in ownership, management, use, operation and maintenance of the building and their respective impacts and interests on energy use and consumption. NOTE 1
47、See Informative Annex B: Examples of parties of an energy audit in buildings. The scope of the audit should be agreed to cover technical interaction of the systems within the building, and the interaction of the systems with the building. Optimization of some specific sector to the exclusion of othe
48、rs may give misleading results. The agreed aims of the energy audit may contain: a) reducing energy consumption and costs; b) reducing environmental impact; 1prEN 16247-5 is currently not yet published and is under development. DIN EN 16247-2:2014-08 EN 16247-2:2014 (E) 9 c) complying with legislati
49、on or with voluntary obligations. The energy audit scope and boundaries shall define what is included, in terms of: a) which buildings from a list of buildings or parts of a building; b) which energy services; c) which technical building systems; d) which areas and systems outside the building; e) which energy performance indicators could be used as appropriate to the audit. The energy audit degree of thoroughness shall be agreed, taking into account that it will impact: a) time on site; b) choice of samples; c) level of modelling; d) require
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1