DIN EN 16297-1-2013 Pumps - Rotodynamic pumps - Glandless circulators - Part 1 General requirements and procedures for testing and calculation of energy efficiency index (EEI) Germ.pdf

1、April 2013 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、23.080!*_?“7616028www.din.deDDIN EN 16297-1Pumps Rotodynamic pumps - Glandless circulators Part 1: General requirements and procedures for testing and calculationof energy efficiency index (EEI);English version EN 16297-1:2012,English translation of DIN EN 16297-1:2013-04Pumpen Kreiselpumpen - Umwlz

3、pumpen in Nassluferbauart Teil 1: Allgemeine Anforderungen und Verfahren zur Prfung und Berechnung desEnergieeffizienzindexes (EEI);Englische Fassung EN 16297-1:2012,Englische bersetzung von DIN EN 16297-1:2013-04Pompes Pompes rotodynamiques - Circulateurs sans presse-toupe Partie 1: Exigences gnral

4、es et procdures pour les essais et le calcul de lindicedefficacit nergtique (IEE);Version anglaise EN 16297-1:2012,Traduction anglaise de DIN EN 16297-1:2013-04Together with DIN EN16297-2:2013-04,supersedesDIN EN 1151-1:2006-11 andDIN EN 1151-1 Corrigendum1:2008-06www.beuth.deDocument comprises 24 p

5、agesIn case of doubt, the German-language original shall be considered authoritative.04.13DIN EN 16297-1:2013-04 2 A comma is used as the decimal marker. National foreword This standard specifies requirements and procedures for testing and calculation of the energy efficiency index for glandless cir

6、culators having a rated hydraulic output power of between 1 W and 2500 W designed for use in heating systems or cooling distribution systems. This document (EN 16297-1:2012) has been prepared by Technical Committee CEN/TC 197 “Pumps” (Secretariat: AFNOR, France). The responsible German body involved

7、 in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-11-01 AA Kreiselpumpen of Section Kreiselpumpen. Representatives of manufacturers and users of glandless circulators, and of the employers liability insurance associations

8、contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC in conjunction with Directive 2009/125/EC and Commission Regulation (EC) No 641/2009, and which apply to machines that are eith

9、er first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of these directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufa

10、cturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same n

11、umber. For the International Standards which have not been published as DIN ISO Standards with the same number, there are no national standards available. Amendments This standard differs from DIN EN 1151-1:2006-11 and DIN EN 1151-1 Corrigendum 1:2008-06 as follows: a) the scope now includes electri

12、cally controlled pumps; b) the standard has been subdivided; c) the procedure for calculating the energy efficiency index (EEI) of standalone circulators has been included to meet the requirements of the Ecodesign Directive. Previous editions DIN EN 1151-1: 1999-05, 2006-11 DIN EN 1151-1 Corrigendum

13、 1: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16297-1 October 2012 ICS 23.080 Supersedes EN 1151-1:2006English Version Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI) Pompe

14、s - Pompes rotodynamiques - Circulateurs sans presse-toupe - Partie 1: Exigences gnrales et procdures pour les essais et le calcul de lindice defficacit nergtique (IEE) Pumpen - Kreiselpumpen - Umwlzpumpen in Nassluferbauart - Teil 1: Allgemeine Anforderungen und Verfahren zur Prfung und Berechnung

15、des Energieeffizienzindexes (EEI) This European Standard was approved by CEN on 18 August 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d

16、ate lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

17、n under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo

18、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMI

19、T EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16297-1:2012: EEN 16297-1:2012 (E) 2 Contents Page Foreword 3Introd

20、uction .41 Scope 52 Normative references 53 Terms and definitions .54 Symbols and units .95 Performance requirements and safety requirements 95.1 Hydraulic characteristics 95.1.1 General 95.1.2 Q100%and H100%105.2 Rated and minimum power input 105.3 Starting characteristics 105.4 Resistance to inter

21、nal pressure 105.5 Resistance to thermal cycling . 105.6 Venting and deblocking . 105.7 Fluid and structure borne noise emission . 106 General test methods . 106.1 General . 106.2 Testing of the hydraulic characteristic . 116.2.1 Rated hydraulic output power, Phyd,r116.2.2 Reference power, Pref126.2

22、.3 Tolerance on H100%at maximum hydraulic power . 126.2.4 Reference control curve . 136.2.5 Load profile for calculation of average compensated power input, PLavg. 136.2.6 Part load operating points . 136.2.7 Calculation of compensated power input, PL. 166.2.8 Calculation of average compensated powe

23、r input, PL,avg166.2.9 Calculation of energy efficiency index (EEI), EEI166.2.10 Test conditions . 176.2.11 Testing of hydraulic performance . 186.3 Measurement of rated power input . 186.4 Starting conditions . 186.5 Testing of resistance to internal pressure . 196.6 Testing of resistance to therma

24、l cycling 196.6.1 Circulator supply voltage . 196.6.2 Intermittent operation . 197 Information for use . 207.1 General . 207.2 Instruction handbook . 207.3 Marking 20Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 641/2009 21Bi

25、bliography . 22DIN EN 16297-1:2013-04 EN 16297-1:2012 (E) 3 Foreword This document (EN 16297-1:2012) has been prepared by Technical Committee CEN/TC 197 “Pumps”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication

26、of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not b

27、e held responsible for identifying any or all such patent rights. This document, together with EN 16297-2:2012, supersedes EN 1151-1:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requireme

28、nts of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 16297 consists of the following parts under the general title Pumps Rotodynamic pumps Glandless circulators: Part 1: General requirements and procedures for testing

29、 and calculation of energy efficiency index (EEI); Part 2: Calculation of energy efficiency index (EEI) for standalone circulators; Part 3: Energy efficiency index (EEI) for circulators integrated in products. According to the CEN/CENELEC Internal Regulations, the national standards organisations of

30、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth

31、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16297-1:2013-04 EN 16297-1:2012 (E) 4 Introduction This European Standard has been prepared under mandate M/469 EN of 22 June 2010 given to CEN by the European Commission

32、 and the European Free Trade Association to provide a means of conforming to Requirements of the EU Directive 2005/32/EC of 6 July 2005 and Commission Regulation (EC) 641/2009 of 22 July 2009 by describing procedures for measurement and calculation of hydraulic power, power consumption, and energy e

33、fficiency index of circulators. The document comprises standalone circulators and circulators integrated in products. NOTE For the purpose of this document, the term “product“ is used in the sense of an appliance that generates and/or transfers heat. Standalone circulator means a circulator designed

34、 to operate independently from the product and should be tested and calculated in accordance with EN 16297-2. Circulator integrated in a product means a circulator designed to operate dependently of the products and should be tested and calculated in accordance with EN 16297-3. The following table c

35、an be used as guidance for deciding when EN 16297-3 applies. A circulator is considered to be operated dependently if it carries at least one of the design details listed in Table 1. Table 1 When EN 16297-3 applies Design Details Examples (non exhaustive list) Pump housing Designed to be mounted and

36、 used inside a product Housings designed for use inside products e.g. with clip connections, with back panel connection or plate heat exchanger connections. Housings integrating electrically or thermally driven valve functions Control Designed to be speed controlled by the product Circulators with p

37、roduct specific control signal interfaces Safety measures Designed with safety features not suitable for stand alone operation Product takes over safety features (ISO IP classes) Circulator is a defined part of product approval or product CE marking Circulator is part of the component list of produc

38、t approval or product CE marking DIN EN 16297-1:2013-04 EN 16297-1:2012 (E) 5 1 Scope This European Standard specifies general performance requirements and general requirements and procedures for testing and calculation of the energy efficiency index (EEI) for glandless circulators having a rated hy

39、draulic output power of between 1 W and 2500 W designed for use in heating systems or cooling distribution systems. All known hazards which are likely to occur at normal installation and operation are covered by the European Standards EN 809 and EN 60335-2-51. As regards safety for electro-technical

40、 parts of circulators, EN 60335-2-51 applies. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition o

41、f the referenced document (including any amendments) applies. EN 1151-2:2006 Pumps Rotodynamic pumps Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Noise test code (vibro-acoustics) for measuring structure- and fluid-bo

42、rne noise EN 50160:2007, Voltage characteristics of electricity supplied by public distribution networks EN 60335-2-51:2003, Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations EN ISO 9906:

43、2012, Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2 and 3 (ISO 9906:2012) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 heating system system where heat is generated and/or transferred 3.2 cooling distribution system

44、system where a cooling medium is distributed 3.3 impeller pump machine to transfer mechanical energy through a rotating impeller to gain velocity and pressure for the pumped liquid 3.4 pump housing part of an impeller pump (3.3) which is connected to the pipework of the heating system (3.1) or cooli

45、ng distribution system (3.2) DIN EN 16297-1:2013-04 EN 16297-1:2012 (E) 6 3.5 circulator impeller pump with or without pump housing (3.4) designed for use in heating systems (3.1) or cooling distribution systems (3.2) 3.6 glandless circulator circulator (3.5) with the rotor directly coupled to the i

46、mpeller and immersed in the pumped medium Note 1 to entry: For the purpose of this document, the term circulator is used in the following in place of glandless circulator. 3.7 double circulator double pump twin head pump two circulators (3.5) mounted on a single pump housing (3.4) with two volutes 3

47、.8 inlet pressure (static pressure) pressure at the pump inlet to which the pump is subjected during operation Note 1 to entry: All pressures in this document are gauge pressures except for the differential pressure (3.9) measured in 6.2.10.4.2. 3.9 differential pressure gain in pressure between the

48、 pump inlet and pump outlet 3.10 maximum outlet working pressure sum of maximum inlet pressure (3.8) and maximum differential pressure (3.9) 3.11 hydraulic power conventional expression of the arithmetic product of the flow, Q, the head, H, and a constant Note 1 to entry For the purpose of this docu

49、ment, the hydraulic poweris expressed by: hyd2,72P QH= where: Phydis the hydraulic power W Q is the flow m/h H is the differential head m 2,72 is the conversion factor assuming water temperature 20 C and gravity of 9,81 m/s2 3.12 rated hydraulic output power Phyd,rhydraulic power generated by a circulator in maximum setting where the hydraulic power is maximum DIN EN 16297-1:2013-04 EN 16297-1:2012 (E) 7 3.13 system curve graphic