DIN EN 16313-2013 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3 4 A and inside cone German version EN 16313 2013《加热和冷却设备用连接件.pdf

1、August 2013 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.140.10!%(u“2052782www.din.deDDIN EN 16313Connections for heating and cooling appliances Detachable connection with outside threaded pipe G 3/4 A and insidecone;English version EN 16313:2013,English translation of DIN EN 16313:2013-08Anschlsse fr Heiz- und Khlsysteme Lsbare Verbindung mit Rohrauen

3、gewinde G 3/4 A und Innenkonus;Englische Fassung EN 16313:2013,Englische bersetzung von DIN EN 16313:2013-08Raccords pour appareils de chauffage et de refroidissement Raccords dmontables filetage extrieur cylindrique G 3/4 A et cne intrieur;Version anglaise EN 16313:2013,Traduction anglaise de DIN E

4、N 16313:2013-08www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 9 pages 08.13 DIN EN 16313:2013-08 2 A comma is used as the decimal marker. National foreword This document (EN 16313:2013) has been prepared by Technical Committee CEN/TC 1

5、30 “Space heating appliances without integral heat sources” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Heiz- und Raumluft-technik (Heating and Ventilation Technology Standards Committee), Working Committee NA 041-03-60 AA Thermostatisch

6、e Heizkrperventile. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16313 May 2013 ICS 91.140.10 English Version Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside coneRaccords pour appareils de chauffage et de refroidissement -

7、Raccords dmontables filetage extrieur cylindrique G 3/4 A et cne intrieur Anschlsse fr Heiz- und Khlsysteme - Lsbare Verbindung mit Rohrauengewinde G 3/4 A und Innenkonus This European Standard was approved by CEN on 11 April 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regula

8、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member

9、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN

10、 members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P

11、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and b

12、y any means reserved worldwide for CEN national Members. Ref. No. EN 16313:2013: EEN 16313:2013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Dimensions and designs 5 4 Functions and requirements 6 Bibliography 7 DIN EN 16313:2013-08EN 16313:2013 (E) 3 Foreword

13、This document (EN 16313:2013) has been prepared by Technical Committee CEN/TC 130 “Space heating appliances without integral heat sources”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or

14、by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible

15、 for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo

16、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16313:2013-08EN 16313:2013 (E) 4

17、 Introduction On the market, a series of geometries (outside threaded pipe G A with inside cone and counter geometries), e.g. under the designation “eurocone”, is commonly used. These geometries, however, are compatible with each other only to a limited degree. Therefore, this European Standard is i

18、ntended to achieve a unification of detachable connections with outside threaded pipe G A and inside cone. Significant known applications are: connection geometries of radiators with integrated valves; connection geometries of connection fittings and bypass connection fittings on radiators with inte

19、grated valves; connection geometries of ascension pipe valves for standard radiators; connection geometries of heating circuit distributors to underfloor heatings and radiator connection systems; interface between radiator nipple and thermostatic valve or lockshield valve. Detachable connections wit

20、h the outside threaded pipe G A are normally made of metallic materials. Further variants are possible. So far, the designation “eurocone” has conveyed the impression that there is a standardised geometry. However, this is not the case, i.e. the screw in or thread lengths, the cone angles and diamet

21、ers, as well as the diameter of the inner cylinder differ frequently. Furthermore, the following variants are commonly used: spherical or tapered cone; cones with and without inserted sealing material; sealing principles inside the cylindrical part of the geometry comprising O rings; O rings within

22、the slope of the cone (O rings offered by different providers are designed for different press fits); and sealings without additional sealing material (metallic sealing). DIN EN 16313:2013-08EN 16313:2013 (E) 5 1 Scope This European Standard applies to detachable connections with outside threaded pi

23、pe G A in accordance with EN ISO 228-1. These are used in the field of heating and cooling emission systems at the following hydraulic connection points: connection between radiators or circuit distributors and the respective pipe. Another connection point, for radiators with integrated valve sets,

24、is the screw connection to the connection fitting or to the screw connection itself. This European Standard specifies the dimensions for the single and the double connection. 2 Normative references Not applicable. 3 Dimensions and designs Dimensions in millimetres Surface roughness in micrometres Ke

25、y Ra = roughness Figure 1 Detachable connections with outside threaded pipe G A and thread undercut DIN EN 16313:2013-08EN 16313:2013 (E) 6 Dimensions in millimetres Surface roughness in micrometres Key Ra = roughness Figure 2 Detachable connections with outside threaded pipe G A and thread run out

26、without undercut Dimensions in millimetres Figure 3 Detachable double connections according to Figure 1 or Figure 2 4 Functions and requirements In the use case, the companion pieces and the connection geometries, as standardised in this document, have to ensure a permanent leak tight connection. DI

27、N EN 16313:2013-08EN 16313:2013 (E) 7 Bibliography 1 DIN 3842, Valves for heating installations, PN 10; dimensions, materials, design 2 EN 215, Thermostatic radiator valves Requirements and test methods 3 EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dime

28、nsions, tolerances and designation (ISO 228-1) 4 EN ISO 1101, Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out (ISO 1101) 5 EN ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product d

29、ocumentation (ISO 1302) 6 EN 22768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1) 7 EN 22768-2, General tolerances Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2) DIN EN 16313:2013-08