DIN EN 16565-2014 Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap German version EN 16565 2014《包装 软管 测定翻盖定位的试验方法 德文版本EN 16565-2014》.pdf

1、November 2014 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 55.120!%$“2270201www.din.deDDIN EN 16565Packaging Flexible tubes Test method to determine the orientation of the flip-top cap;English version EN 16565:2014,English translation of DIN EN 16565:2014-11Verpackung Tuben Prfverfahren zur Bestimmung der Ausrichtung des Klappdeckelverschlusses;Englische

3、Fassung EN 16565:2014,Englische bersetzung von DIN EN 16565:2014-11Emballage Tubes souples Mthode dessai pour la dtermination de lorientation de lobturateur charnire;Version anglaise EN 16565:2014,Traduction anglaise de DIN EN 16565:2014-11www.beuth.deDocument comprises pagesIn case of doubt, the Ge

4、rman-language original shall be considered authoritative.910.14DIN EN 16565:2014-11 2 A comma is used as the decimal marker. National foreword This document (EN 16565:2014) has been prepared by Technical Committee CEN/TC 261 “Packaging” (Secretariat: AFNOR, France). The responsible German body invol

5、ved in its preparation was the DIN-Normenausschuss Verpackungswesen (DIN Standards Committee Packaging), Working Committee NA 115-02-08 AA Tuben. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16565 August 2014 ICS 55.120 English Version Packaging - Flexible tubes - Test method to determine th

6、e orientation of the flip-top cap Emballage - Tubes souples - Mthode dessai pour la dtermination de lorientation de lobturateur charnire Verpackung - Tuben - Prfverfahren zur Bestimmung der Ausrichtung des Klappdeckelverschlusses This European Standard was approved by CEN on 18 July 2014. CEN member

7、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

8、 to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managemen

9、t Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li

10、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17,

11、 B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16565:2014 EEN 16565:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Test principle and testing equipment 4 3 Execution 5 4 Test report 6 Bibliography 7 DIN EN 1

12、6565:2014-11 EN 16565:2014 (E) 3 Foreword This document (EN 16565:2014) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or b

13、y endorsement, at the latest by February 2015 and conflicting national standards shall be withdrawn at the latest by February 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible f

14、or identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Form

15、er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16565:2014-11 EN 16565:2014 (E) 4

16、1 Scope This European Standard specifies a method to test the orientation of the flip-top cap on flexible tubes. It is applicable to aluminium, plastic and laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products. 2 Test principle and testin

17、g equipment The test principle is described in Figure 1. Key a maximum deviation in mm/degree 1 axis of symmetry of cap hinge 2 deviation 3 axis of symmetry of back printed face Figure 1 Test principle Any test equipment which is able to accurately measure the correct orientation of the flip-top cap

18、 can be used. An example for a suitable test device is given in Figure 2. DIN EN 16565:2014-11 EN 16565:2014 (E)5 Figure 2 Example for test device and measurement 3 Execution Take samples of the finished product (empty tube including flip-top cap). Measure the deviation with the test device. Read th

19、e deviation. The maximum deviation shall stay within the limits given in Table 1. DIN EN 16565:2014-11 EN 16565:2014 (E) 6 Table 1 Maximum deviation in mm and degree depending on tube diameter Tube diameter (in mm) Maximum deviation (in mm) Maximum deviation (in degree) 19 3 18,1 22 3 15,6 25 3 13,8

20、 28 3 12,3 30 3 11,5 32 3 10,7 35 3 9,8 38 4 12,1 40 4 11,5 45 4 10,2 50 6 13,8 56 6 12,3 60 6 11,5 Conversion formula: 360/X mm D= X = value in degrees mm = value in mm D = tube diameter in mm = 3,14 4 Test report The test report shall contain the following information: a) reference to this Europea

21、n Standard and, if necessary, a specification for the method of sampling and acceptance of the batch; b) the complete identification of the batch and of the tubes checked; c) the date of production; d) the number of tubes checked; e) the number of defects; f) the test result; g) all factors which could have affected the results or all operating details not specified in this European Standard; h) date, place of test and name of tester. DIN EN 16565:2014-11 EN 16565:2014 (E) 7 Bibliography 1 EN 12374, Packaging - Flexible tubes - Terminology DIN EN 16565:2014-11