DIN EN 16578-2016 Ceramics sanitary appliances - Sustainability assessment German version EN 16578 2016《陶瓷卫生器具 可持续性评价 德文版本EN 16578-2016》.pdf

1、July 2016 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.70!%XL7“2534120www.din.deDIN

2、 EN 16578Ceramics sanitary appliances Sustainability assessment;English version EN 16578:2016,English translation of DIN EN 16578:2016-07Keramische Sanitrausstattungsgegenstnde Beurteilung der Nachhaltigkeit;Englische Fassung EN 16578:2016,Englische bersetzung von DIN EN 16578:2016-07Appareils sanit

3、aires en cramique Evaluation de durabilit;Version anglaise EN 16578:2016,Traduction anglaise de DIN EN 16578:2016-07www.beuth.deDocument comprises 36 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.06.16DIN EN 16578:2016-07 2 A

4、 comma is used as the decimal marker. National foreword This document (EN 16578:2016) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances” (Secretariat: UNI, Italy). The preliminary work was done by Working Group WG 3 “Closet bowls, flushing cisterns, urinals, bidets and kitchen

5、 sinks”. The responsible German body involved in its preparation was DIN-Normenausschuss Wasserwesen (DIN Standards Committee Water Practice), Working Committee NA 119-05-18-01 UA Waschtische, Sitzwaschbecken, Klosetts, Urinale. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16578 February 201

6、6 ICS 91.140.70 English Version Ceramics sanitary appliances - Sustainability assessmentAppareils sanitaires en cramique - Evaluation de durabilit Keramische Sanitrausstattungsgegenstnde - Beurteilung der Nachhaltigkeit This European Standard was approved by CEN on 13 December 2015. CEN members are

7、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th

8、e CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cent

9、re has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

10、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000

11、 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16578:2016 EEN 16578:2016 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Assessment 8 4.1 Gen

12、eral 8 4.2 Ecological criteria . 9 4.2.1 General 9 4.2.2 Parameters describing the resource use . 10 4.2.3 Parameters describing output flows and waste categories 11 4.2.4 Parameters describing environmental impact . 12 4.2.5 Parameters describing the construction process. 18 4.2.6 Recycling potenti

13、al 18 4.3 Economical criteria . 18 4.3.1 General . 18 4.3.2 Parameters describing the operational water use 19 4.3.3 Parameters describing the life cycle . 19 4.3.4 Parameters describing the energy management . 20 4.4 Social and functional criteria . 20 4.4.1 General . 20 4.4.2 User friendliness 20

14、4.4.3 Safety in use 21 4.4.4 Maintenance, repair and replacement . 21 5 Classification 21 6 Marking and product designation 22 Annex A (informative) Matrix of assessed data 23 A.1 Ecological criteria (see 4.2) 23 A.2 Economical criteria (see 4.3) . 24 A.3 Social and functional criteria (see 4.4) 25

15、Annex B (informative) Evaluation scheme. 26 B.1 General . 26 B.2 Evaluation of ecological criteria . 26 B.3 Evaluation of economical criteria 27 B.4 Evaluation of social and functional criteria 27 B.5 Evaluation of the total rating . 27 Annex C (informative) Example for a table with typical values f

16、or the production of ceramic sanitary appliances 32 Bibliography . 34 DIN EN 16578:2016-07 EN 16578:2016 (E) 3 European foreword This document (EN 16578:2016) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard sh

17、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this docu

18、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supports the unified approach for the assessment of sustainability of ceramic sanitary appliances, i.e. WC pans and WC suites, urinals, wash basins,

19、 bidets and communal washing troughs, in the light of the document CPR 06/10/1 of European Commission - Enterprise and Industry - Sustainable Industrial Policy and Construction. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bou

20、nd to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga

21、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16578:2016-07 EN 16578:2016 (E) 4 Introduction This European Standard supports the (harmonized) European Standards on ceramic sanitary appliances elaborated by CEN/TC 163 on assessing the sustainability

22、 for these products. This European Standard provides a system for sustainability assessment of ceramic sanitary appliances using a life cycle approach, featuring qualitative and quantitative indicators for ecologic, economic and social performance of sanitary ceramic appliances. The purpose of this

23、European Standard is to provide requirements and classification values for the assessment of the sustainability of ceramic sanitary appliances. Selected parameters assessed in accordance with this standard represent the main parameters defined in EN 15804. This European Standard may be used to suppo

24、rt environmental building assessment and environmental product declarations (EPDs). The structure and the parameters of EN 15804 mandatory requirements from information modules A1 to A3 - are used as a basis for the ecological criteria of this European Standard. A system with sustainability classes

25、has been introduced to express the performance of ceramic sanitary appliances. The link between these classes and the assessment of the products form a framework of evaluation schemes. Evaluation schemes enable the comparison of different ceramic sanitary appliances. NOTE EPDs based on EN 15804 are

26、not comparative assertions (see EN 15804:2012+A1:2013, 5.1). These EPDs are necessary for environmental assessment of building only. DIN EN 16578:2016-07 EN 16578:2016 (E) 5 1 Scope This European Standard specifies sustainability requirements together with assessment methods and evaluation schemes f

27、or ceramic sanitary appliances, i.e. WC pans and WC suites in accordance with EN 997, urinals in accordance with EN 13407, wash basins in accordance with EN 14688, communal washing troughs in accordance with EN 14296 and bidets in accordance with EN 14528. NOTE This European Standard may be applicab

28、le to other ceramic sanitary appliances. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the

29、 referenced document (including any amendments) applies. EN 997, WC pans and WC suites with integral trap EN 12056 (all parts), Gravity drainage systems inside buildings EN 13407, Wall-hung urinals - Functional requirements and test methods EN 14296, Sanitary appliances - Communal washing troughs EN

30、 14528, Bidets - Functional requirements and test methods EN 14688, Sanitary appliances - Wash basins - Functional requirements and test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 abiotic depletion potential for fossil resources

31、measures the gradual depletion of non-renewable fossil resources Note 1 to entry: An example is raw oil. 3.2 abiotic depletion potential for non-fossil resources measures the gradual depletion of non-renewable non-fossil resources Note 1 to entry: An example is clay. 3.3 acidification potential of l

32、and and water sums contributions of sulphuric acid and nitric acid to acid rain, acid snow and acid deposition Note 1 to entry: It includes sulphur oxides (SO2, SO3) and nitrogen oxides (N2O, NO and NO2). 3.4 auxiliary production tool EXAMPLE Casting moulds, sponges and supports DIN EN 16578:2016-07

33、 EN 16578:2016 (E) 6 3.5 ceramics inorganic non-metallic material which is typically moulded from raw materials at room temperature and gains its characteristic physical properties during a firing process (after the moulding) Note 1 to entry: The term “ceramic materials for sanitary appliances” cove

34、rs both vitreous china and fine fire clay materials. 3.6 construction product item manufactured or processed for incorporation in construction works SOURCE: EN 15804:2012+A1:2013 3.7 consumption use of materials or energy within a defined time frame 3.8 cost in use expenses incurred while using the

35、product 3.9 declared unit quantity of a construction product for use as a reference unit Note 1 to entry: Usual units for mass is t, for quantity is piece. 3.10 depletion potential of the stratospheric ozone layer measures depletion of stratospheric ozone needed for protection against UV radiation N

36、ote 1 to entry: This includes chlorofluorocarbons (CFCs). 3.11 energy management system to monitor, control and evaluate the type of power supply as well as the energy consumption of a product 3.12 eutrophication potential measures dissolved oxygen depletion by undesirable forms of biomass, such as

37、algae Note 1 to entry: This includes various forms of nitrogen and phosphorus. 3.13 formation potential of tropospheric ozone photochemical oxidants puts all smog-producing chemicals on the same equivalent 3.14 glazed ceramic ceramic body with a surface layer of silicon oxide compound applied before

38、 the firing process and chemically bonded during firing Note 1 to entry: The glaze deemed to be a part of the ceramics and not a separate coating. DIN EN 16578:2016-07 EN 16578:2016 (E) 7 3.15 global warming potential puts all greenhouse gases on the same denominator Note 1 to entry: Greenhouse gase

39、s include CO2, CH4, N2O and CFCs. 3.16 gypsum dehydrate natural gypsum as used for plaster moulds 3.17 hazardous substance solid, liquid or gas that can harm people, other living organisms, property or the environment 3.18 life cycle consecutive and interlinked stages of a construction products life

40、, from raw material acquisition or generation from natural resources to final disposal 3.19 maintenance all actions to maintain or repair in order a product to continue its declared function 3.20 production industrial process consisting of different steps in the manufacture of goods 3.21 production

41、system collection of unit processes with elementary and product flows, performing one or more defined functions, and which determines the life cycle of a product 3.22 raw material single material or a mixture of different materials (e.g. feedstock, ceramic body) as being the basic material of which

42、a product is manufactured 3.23 recycling use of material as secondary material outside the boundary of the production system Note 1 to entry: Examples are recycled gypsum of plaster moulds. 3.24 renewable energy energy from renewable non-fossil sources Note 1 to entry: Non-fossil sources are, for ex

43、ample, wind, solar, aerothermal, geothermal, hydrothermal and ocean energy, hydropower, biomass, landfill gas, sewage treatment plant gas, electricity generation through exhaust gas heat etc. 3.25 safety in use characteristic of the level of risks associated with the installation and use of the prod

44、uct DIN EN 16578:2016-07 EN 16578:2016 (E) 8 3.26 secondary fuel fuel recovered from previous use or from waste which substitutes primary fuels 3.27 secondary material material recovered from previous use or from waste which substitutes primary materials Note 1 to entry: Secondary material is measur

45、ed at the point where the secondary material enters the production system from another production system. Note 2 to entry: Materials recovered from previous use or from waste from one production system and used as an input in another production system are secondary materials e.g. use of milled scrap

46、 technical ceramics as raw material for ceramics sanitary appliances. Note 3 to entry: Examples for secondary materials (to be measured at the boundary of the production system) are recycled sanitary appliances, tiles or technical ceramics. 3.28 transport movement of goods (e.g. products, raw materi

47、als) from one location to another 3.29 total production means the production of saleable ceramic sanitary appliances Note 1 to entry: Usual unit is t/a. 3.30 user friendly characteristic of the level of product ease of use 3.31 waste management collection, transport, processing, recycling or disposa

48、l of waste materials and their monitoring and recycling 3.32 water saving reduction in water use accomplished by implementation of water conservation, water reduction or water efficiency measures 4 Assessment 4.1 General The criteria are based on the “three pillar model” of sustainability as stipula

49、ted in the World Summit Conference 2005 4. These “three pillars” (ecological, economic and social requirements) are generally used in terms of sustainability. NOTE 1 Pillar 1 “Ecological requirements” covers the applicable requirements from information modules A1 to A5 of EN 15804. Pillar 2 “Economical requirements” covers the applicable requirements from information modules B1, B6 and B7 of EN 15804. DIN EN 16578:2016-07 EN 16578:2016 (E) 9 Pillar 3 “Social requirements” covers further applicable requirements from information modules B2 to B5 of EN 15804. This cla