DIN EN 16602-70-22-2015 Space product assurance - Control of limited shelf-life materials English version EN 16602-70-22 2014《航天产品保证 货架寿命有限制的材料的控制 英文版本EN 16602-70-22-2014》.pdf

1、Juni 2015DEUTSCHE NORM DIN-Normenausschuss Luft- und Raumfahrt (NL)Preisgruppe 11DIN Deutsches Institut fr Normung e. V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e. V., Berlin, gestattet.ICS 49.140; 49.025.01!%B-N“2311043www.din.deDDI

2、N EN 16602-70-22Raumfahrtproduktsicherung Kontrolle von Materialien mit begrenzter Lagerfhigkeit;Englische Fassung EN 16602-70-22:2014Space product assurance Control of limited shelf-life materials;English version EN 16602-70-22:2014Assurance produit des projets spatiaux Contrle des quipements dure

3、de vie limite sur tagre;Version anglaise EN 16602-70-22:2014Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 BerlinErsatz frDIN EN 14089:2003-03www.beuth.deGesamtumfang 17 SeitenDIN EN 16602-70-22:2015-06 2 Nationales Vorwort Dieses Dokument (EN 16602-70-22:2014) wurde vom Technischen Komitee

4、 CEN/CLC/TC 5 Raumfahrt“ erarbeitet, dessen Sekretariat vom DIN (Deutschland) gehalten wird. Das zustndige deutsche Normungsgremium ist der Arbeitsausschuss NA 131-10-01 AA Interoperabilitt von Informations-, Kommunikations- und Navigationssystemen“ im DIN-Normenausschuss Luft- und Raumfahrt (NL). D

5、ieses Dokument ersetzt DIN EN 14089:2003-03. Dieses Dokument (EN 16602-70-22:2014) basiert auf ECSS-Q-ST-70-22C. Dieses Dokument enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 1/2004 nur die englische Originalfassung von EN 16602-70-22:2014. Dieses Dokument wurde speziell zur Behandlung vo

6、n Raumfahrtsystemen erarbeitet und hat daher Vorrang vor jeglicher Europischer Norm, da es denselben Anwendungsbereich hat, jedoch ber einen greren Geltungsbereich (z. B. Luft- und Raumfahrt) verfgt. nderungen Gegenber wird DIN EN 14089:2003-03 wurden folgende nderungen vorgenommen: a) Norm-Nummer g

7、endert; b) keinerlei nderungen des Textes. Frhere Ausgaben DIN EN 14089: 2003-03 DIN EN 16602-70-22:2015-06 3 Nationaler Anhang NA (informativ) Begriffe und Abkrzungen 3 Begriffe und Abkrzungen 3.1 Begriffe aus anderen Normen Fr die Anwendung dieses Dokuments gelten die Begriffe nach ECSS-S-ST-00-01

8、 und ECSS-Q-ST-70. 3.2 Fr diese Norm spezifische Begriffe 3.2.1 Charge whrend eines Arbeitsganges gefertigte Menge ANMERKUNG Eine Charge kann in mehrere Lose unterteilt sein. 3.2.2 Lagerfhigkeit Zeitraum, ber den ein Material so verarbeitet werden kann, dass endgltige Eigenschaften mit einheitlich s

9、tabilen Parametern erzeugt werden 3.3 Abkrzungen Fr die Anwendung dieses Dokuments gelten die Abkrzungen in ECSS-S-ST-00-01 und die folgende Abkrzung: Abkrzung Bedeutung RH relative Luftfeuchte (en: relative humidity) DIN EN 16602-70-22:2015-06 4 Leerseite EUROPEAN STANDARD NORME EUROPENNE EUROPISCH

10、E NORM EN 16602-70-22 October 2014 ICS 49.025.01; 49.140 Supersedes EN 14089:2002 English version Space product assurance - Control of limited shelf-life materials Assurance produit des projets spatiaux - Contrle des quipements dure de vie limite sur tagre Raumfahrtproduktsicherung - Kontrolle von M

11、aterialien mit begrenzter Lagerfhigkeit This European Standard was approved by CEN on 11 April 2014. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al

12、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any othe

13、r language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechnical committees

14、 of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spai

15、n, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 16602-70-22:2014 E EN 16602-70

16、-22:2014 (E) 2 Table of contents Foreword 3 1 Scope . 4 2 Normative references . 5 3 Terms, definitions and abbreviated terms 6 3.1 Terms defined in other standards . 6 3.2 Terms specific to the present standard . 6 3.3 Abbreviated terms. 6 4 Requirements 7 4.1 Control of material life . 7 4.1.1 Haz

17、ards, health and safety precautions 7 4.1.2 Material control . 7 4.1.3 Assessment of shelf-life 8 4.1.4 Extension of shelf-life (re-certification). 9 4.1.5 Disposal of materials . 9 4.1.6 Acceptance criteria, re-certification testing 9 4.2 Quality assurance . 9 4.2.1 Data 9 4.2.2 Calibration . 10 An

18、nex A (normative) Shelf-life material evaluation report - DRD . 11 Annex B (informative) Examples of properties to be measured . 12 Bibliography . 13 DIN EN 16602-70-22:2015-06 EN 16602-70-22:2014 (E) 3 Foreword This document (EN 16602-70-22:2014) has been prepared by Technical Committee CEN/CLC/TC

19、5 “Space”, the secretariat of which is held by DIN. This standard (EN 16602-70-22:2014) originates from ECSS-Q-ST-70-22C. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015, and conflictin

20、g national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document sup

21、ersedes EN 14089:2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document has been developed to cover specifically space systems and has therefore precedence over any EN covering the same scope but with a wid

22、er domain of applicability (e.g. : aerospace). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, For

23、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16602-70-22:2015-06 EN 16602-70-2

24、2:2014 (E) 4 1 Scope Several classes of materials depend on a chemical reaction for their application and their final properties are sensitive to the exact composition of the reactants. The final properties vary with the reactants age and storage condition. This Standard defines the requirements for

25、 the identification, handling, storage and control of limited shelf-life materials employed in the fabrication of spacecraft and associated equipment. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00. DIN EN 16602-70-22:

26、2015-06 EN 16602-70-22:2014 (E) 5 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this ECSS Standard. For dated references, subsequent amendments to, or revision of any of these publications do not apply, How

27、ever, parties to agreements based on this ECSS Standard are encouraged to investigate the possibility of applying the more recent editions of the normative documents indicated below. For undated references, the latest edition of the publication referred to applies. EN reference Reference in text Tit

28、le EN 16601-00-01 ECSS-S-ST-00-01 ECSS system Glossary of terms EN 16602-10-09 ECSS-Q-ST-10-09 Space product assurance Nonconformance control system EN 16602-40 ECSS-Q-ST-40 Space product assurance - Safety EN 16602-70 ECSS-Q-ST-70 Space product assurance - Materials, mechanical parts and processes

29、DIN EN 16602-70-22:2015-06 EN 16602-70-22:2014 (E) 6 3 Terms, definitions and abbreviated terms 3.1 Terms defined in other standards For the purpose of this Standard, the terms and definitions from ECSS-S-ST-00-01 and ECSS-Q-ST-70 apply. 3.2 Terms specific to the present standard 3.2.1 batch quantit

30、y produced at one operation NOTE One batch can be subdivided into several lots. 3.2.2 shelf-life period of time during which a material can be processed to produce final properties with consistently stable parameters 3.3 Abbreviated terms For the purpose of this Standard, the abbreviated terms from

31、ECSS-S-ST-00-01 and the following apply: Abbreviation Meaning RH relative humidity DIN EN 16602-70-22:2015-06 EN 16602-70-22:2014 (E) 7 4 Requirements 4.1 Control of material life 4.1.1 Hazards, health and safety precautions a. Materials and parts with hazardous characteristics shall be identified a

32、nd manage in conformance with the “Safety programme plan” specified in ECSS-Q-ST-40. b. Procedures to control hazards, health and safety to personnel, equipment or materials shall be defined and implemented. 4.1.2 Material control 4.1.2.1 Procurement document a. For procurement specifications and pu

33、rchase orders, the date of manufacture, storage conditions and shelf-life of the products shall be declared. 4.1.2.2 Identification a. Materials shall be labelled with the shelf-life and the date of the beginning of life or the date of manufacture (see clause 4.1.3). NOTE In some critical applicatio

34、ns, the project can reduce the shelf-life as originally stated by the manufacturer or supplier in order to meet particularly stringent product assurance requirements. b. For quantities which are split from a batch, it shall be ensured that materials are fully traceable to it and bear the same date a

35、nd life indications. 4.1.2.3 Storage a. Materials shall be stored in a nominally clean area at (22 3) C with a relative humidity of (55 10) % unless specified otherwise by the manufacturer or supplier. DIN EN 16602-70-22:2015-06 EN 16602-70-22:2014 (E) 8 NOTE A wide range of pre-impregnated composit

36、es, adhesives and related materials which are used in the fabrication of spacecraft structures at lower temperatures to preserve their shelf-lives. Refer to clause 4.1.3. b. Storage areas shall be organized and controlled in such a way that limited shelf-life items are identified. NOTE The reason is

37、 to avoid the possibility of over-aged material being used. 4.1.2.4 Handling a. Materials shall be handled with clean lint-free or nylon gloves unless their use is precluded for reasons of safety. NOTE For example, when handling corrosive, toxic and oxidizing substances. 4.1.3 Assessment of shelf-li

38、fe a. If the shelf-life cannot be obtained, the following steps shall be performed: 1. Certify the material at incoming inspection. NOTE Perform tests relevant to the application of the material to ensure that the properties are within those values either specified within the procurement specificati

39、on or in the manufacturers data sheet (where no procurement specification exists). 2. Where satisfactory results are obtained, state that the material has spent half its shelf-life at the time of delivery. 3. If the results are not satisfactory, reject the material. 4. Put the date of manufacture an

40、d shelf-life on the label attached to limited shelf-life material in conformance with clause 4.1.2.2. b. The quantity in each container shall be compatible with the planned short term usage. NOTE The reason is that the number of container openings is kept to the minimum possible. c. Materials shall

41、be decanted from larger into smaller containers if there is large air space above the material. d. For materials which are stored at temperature below zero, a system shall be defined and implemented to record the time exposed to room temperature and the consequent reduction in shelf-life when return

42、ed to low temperature storage. NOTE For materials normally stored at low temperature (below zero), exposure to room temperature can dramatically reduce the shelf-life. e. It shall be ensured that all materials stored at temperatures below room temperature are allowed to attain room temperature prior

43、 to use. DIN EN 16602-70-22:2015-06 EN 16602-70-22:2014 (E) 9 4.1.4 Extension of shelf-life (re-certification) a. To extend the shelf-life of a material that has exceeded its shelf-life, the following activities shall be performed: 1. Re-certify the material for the first time by using the relevant

44、tests in conformance with clause 4.1.6; 2. If the first re-certification is successful, extend the shelf-life equal to half the initial shelf-life; 3. Re-certify the material for the second time on a case-by-case basis depending on product, application, storage and user experience; 4. If the second

45、re-certification is successful, extend the shelf-life to half of the first extension. b. If a fully traceable, non-over-aged batch is suspect, for any reason, the user shall submit it for re-certification. c. Batches awaiting results of a re-certification process separately and shall be labelled as

46、“suspended”. 4.1.5 Disposal of materials a. In case further re-certification is not permitted or traceability has been lost for a batch, or part of a batch, the user shall dispose the material in conformance with the product assurance rules applicable to the project. 4.1.6 Acceptance criteria, re-ce

47、rtification testing a. Re-certification of material shelf-life shall be achieved by retesting the material to verify that its properties are still within their specified limits. b. Retesting shall include those properties specified in the procurement specification or performed during incoming inspec

48、tion. NOTE The choice of properties to be measured is based on a combination of the final application of the material and its processing. c. The choice of properties to be measured and test methods to be used shall be subject to the approval of product assurance. NOTE For examples of properties to b

49、e measured see Annex B. 4.2 Quality assurance 4.2.1 Data a. Quality records shall be retained for ten years or in conformance with project business agreement requirements. NOTE E.g. logbooks. b. The quality records shall be in conformance with Annex A. DIN EN 16602-70-22:2015-06 EN 16602-70-22:2014 (E) 10 4.2.2 Calibration a. Any measuring equipment shall be calibrated to traceable reference standards. b. Any suspected or actual equipment failure shall be recorded as a project nonconformance report according to th