DIN EN 16723-1-2017 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1 Specifications for biomethane for injection in .pdf

1、January 2017 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 27.190!%_rc“2607964www.din.deDIN

2、 EN 16723-1Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Part 1: Specifications for biomethane for injection in the natural gas network;English version EN 167231:2016,English translation of DIN EN 16723-1:2017-01Erdgas und Biomethan zur Verwe

3、ndung im Transportwesen und Biomethan zur Einspeisung ins Erdgasnetz Teil 1: Festlegungen fr Biomethan zur Einspeisung ins Erdgasnetz;Englische Fassung EN 167231:2016,Englische bersetzung von DIN EN 16723-1:2017-01Gaz naturel et biomthane pour utilisation dans le transport et biomthane pour injectio

4、n dans les rseaux de gaz naturel Partie 1:Spcifications du biomthane pour injection dans les rseaux de gaz naturel;Version anglaise EN 167231:2016,Traduction anglaise de DIN EN 16723-1:2017-01www.beuth.deDocument comprises 22 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-langu

5、age original shall be considered authoritative.01.17 DIN EN 16723-1:2017-01 2 A comma is used as the decimal marker. National foreword This document (EN 16723-1:2016) has been prepared by Technical Committee CEN/TC 408 “Natural gas and biomethane for use in transport and biomethane for injection in

6、the natural gas grid” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology). This European Standard covers requirements and test methods for biomethane for injection in the natural gas grid. I

7、n Germany, the technical rule DVGW G 262 “The feed-in of gases from regenerative sources into the networks of public gas supply” governs the quality of biogases, including biomethane. DVGW G 262 will be revised upon publication of this European Standard to prevent any conflicts between the two docum

8、ents. However, DVGW G 262 will not be withdrawn because it covers other gases than biomethane, and through reference to DVGW G 260 “Gas quality” also includes calorimetric parameters which have not been dealt with in the present first edition of this European Standard due to a lack of agreement with

9、in Europe on this subject. In particular, there are no concrete details laid down in this standard regarding the Wobbe index range, which means that DVGW G 260 and DVGW G 262 continue to apply in Germany as regards natural gas and biomethane for injection in the natural gas grid until the next editi

10、on of this European Standard is published. It is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). This is the first edition of thi

11、s standard. National Annex NA (informative) Bibliography DIN EN 16726:2015, Gas infrastructure Quality of gas Group H DIN EN ISO 10715:2000, Natural gas Sampling guidelines (ISO 10715:1997) DIN EN ISO 13443:2005, Natural gas Standard reference conditions (ISO 13443:1996, including Corrigendum 1:1997

12、) EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16723-1 November 2016 ICS 27.190 English Version Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network -Part 1: Specifications for biomethane for injection in the natural gas network Gaz naturel

13、et biomthane pour utilisation dans le transport et biomthane pour injection dans les rseaux de gaz naturel - Partie 1: Spcifications du biomthane pour injection dans les rseaux de gaz naturel Erdgas und Biomethan zur Verwendung im Transportwesen und Biomethan zur Einspeisung ins Erdgasnetz - Teil 1:

14、 Festlegungen fr Biomethan zur Einspeisung ins Erdgasnetz This European Standard was approved by CEN on 17 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with

15、out any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other

16、language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

17、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTE

18、E FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16723-1:2016 E2 Contents Page

19、European foreword . 3 Introduction 4 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Parameters and test methods . 8 4.1 General 8 4.2 Standard reference conditions . 8 4.3 Applicable requirements and test methods for biomethane for injection in the natural gas network . 8 5 Samplin

20、g 10 Annex A (informative) Parameters . 11 A.1 Total silicon 11 A.2 Hydrogen . 11 A.3 Compressor oil, dust impurities and biogenic materials 11 A.4 Water and hydrocarbon dew point temperature . 12 Annex B (informative) Odorization and sulfur . 13 B.1 CEN/TC 408 approach 13 B.2 General . 13 B.3 Total

21、 sulfur from Odorants . 13 Annex C (informative) Examples of different compliance schemes 14 C.1 General . 14 C.2 General prescriptions . 14 C.2.1 Permit conditions . 14 C.2.2 Upgrading plants 14 C.2.3 Control and monitoring . 14 C.2.4 Measurement . 15 C.2.5 Risk assessment 15 C.3 Common practices .

22、 15 Annex D (informative) A-deviations . 18 Bibliography . 19 EN 16723-1:2016 (E) DIN EN 16723-1:2017-01 3 European foreword This document (EN 16723-1:2016) has been prepared by Technical Committee CEN/TC 408 “Natural gas and biomethane for use in transport and biomethane foe injection in the natura

23、l gas network”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by May 2017

24、. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the Eur

25、opean Free Trade Association. EN 16723 consists of the following parts, under the general title “Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network”: Part 1: Specifications for biomethane for injection in the natural gas network Part 2: Automotive

26、 fuel specifications According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of M

27、acedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 16723-1:2016 (E) DIN EN 16723-1:2017-01 4 Introduction This Eur

28、opean Standard was prepared by CEN/TC 408 in response to the European Commission standardization mandate M/475. The Mandate asks for the development of a set of quality specifications for biomethane to be used as a fuel for vehicle engines and to be injected in natural gas pipelines (network). Howev

29、er, the scope of the standard was widened according to BT decision C109/2012 that redefined the scope of CEN/TC 408: “Standardization of specifications for natural gas and biomethane as vehicle fuel and of biomethane for injection in the natural gas grid, including any necessary related methods of a

30、nalysis and testing. Production process, source and the origin of the source are excluded”. NOTE The CEN Technical Board (CEN/BT) is responsible to coordinate the work between technical bodies in order to achieve a coherent set of standards and to avoid overlaps. One of the aims of European policy i

31、n the field of energy is to increase the security of energy supply in the EU as well as to contribute to reduce the emission of greenhouse gases accepted by the EU at Kyoto. In this context, a special focus is given to the development and use of energy from renewable sources. Directive 2009/28/EC on

32、 the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC stipulates clear aims regarding the percentage of renewables in EU energy consumption and states the related need to support the integration of energy from renewabl

33、e sources into the energy networks including the establishment of appropriate technical rules in line with Directive 2003/55/EC (Article 6) replaced by 2009/73/EC (Article 8) for the realization of the competitive single European Gas Market and the technical interoperability of gas networks, (networ

34、k connection, gas quality, gas odorization and gas pressure requirements). Supporting the EU policy and therefore the maximization of the production and use of biomethane and considering the absence of standards the European Commission DG ENER has included the injection of biomethane in natural gas

35、pipelines in Mandate M/475. Biomethane in this context can be produced from biological (fermentation, digestion ) and thermochemical processing of biomass and is appropriate to be used as a blending component to natural gas. A special focus is given to the development and use of energy from renewabl

36、e sources of biological and non-biological origin. Other gases complying with this standard can be injected. Figure 1 provides a visual representation of some applications of biomethane. Mandate M/475 indicates that the requirements for natural gas quality for injection in the natural gas network ar

37、e developed by CEN/TC 234 in answer to Mandate M/400 on natural gas quality. CEN/TC 408 should consider the work of the pending mandate M/400 on gas quality, and should refer to the parameters as defined and specified in EN 16726. This standard should exclude the definition of any parameters or subs

38、tances that are addressed in EN 16726. However, it may specify more strict limits for parameters or substances unique to biomethane if deemed technically necessary. If needed, additional parameters or substances should be defined. EN 16723-1:2016 (E) DIN EN 16723-1:2017-01 5 Key 1 biogas from digest

39、ion or thermos chemical process 7 non-grid sourced natural gas 2 upgrading 8 local dedicated infrastructure 3 injection into the gas grid 9 automotive use 4 natural gas grid 10 domestic and industrial use 5 conditioning 11 Part 1: grid specification 6 refuelling station 12 Part 2: automotive specifi

40、cation Figure 1 Representation of some flows and uses of biomethane and natural gas EN 16723-1:2016 (E) DIN EN 16723-1:2017-01 6 1 Scope This European Standard specifies the requirements and test methods for biomethane at the point of entry into natural gas networks. 2 Normative references The follo

41、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16726:2015, G

42、as infrastructure - Quality of gas - Group H EN ISO 10715:2000, Natural gas - Sampling guidelines (ISO 10715:1997) EN ISO 13443:2005, Natural gas - Standard reference conditions (ISO 13443:1996 including Corrigendum 1:1997) 3 Terms and definitions For the purposes of this document, the terms and def

43、initions given in EN 16726:2015 and the following apply. 3.1 biogas gas, comprising principally methane and carbon dioxide, obtained from the anaerobic digestion of biomass 3.2 biomass biological material from living, or recently living organisms, typically this may be plants or plant-derived materi

44、als 3.3 biomethane gas comprising principally methane, obtained from either upgrading of biogas or methanation of bio-syngas 3.4 bio-syngas gas, comprising principally carbon monoxide and hydrogen, obtained from gasification of biomass 3.5 gas infrastructure pipeline systems including pipework, unde

45、rground gas storages and their associated stations or plants for the transmission and distribution of gas 3.6 hydrocarbon dew point temperature temperature above which no condensation of hydrocarbons occurs at a specified pressure 3.7 lower heating value amount of heat that would be released by the

46、complete combustion with oxygen of a specified quantity of gas, in such a way that the pressure at which the reaction takes place remains constant, and all the products of combustion are returned to the same specified temperature as that of the reactants, all of these products being in the gaseous s

47、tate EN 16723-1:2016 (E) DIN EN 16723-1:2017-01 7 3.8 methane number MN rating indicating the knocking characteristics of a gaseous fuel Note 1 to entry: MN has a similar use as the octane number for petrol. Note 2 to entry: MN expresses the volume percentage of methane in a methane/hydrogen mixture

48、 which, in a test engine under standard conditions, has the same tendency to knock as the gaseous fuel to be examined. 3.9 natural gas complex gaseous mixture of hydrocarbons, primarily methane, but generally includes ethane, propane and higher hydrocarbons, and some non-combustible gases such as ni

49、trogen and carbon dioxide Note 1 to entry: Natural gas can also contain components or contaminants such as sulfur compounds and/or other chemical species. 3.10 natural gas network either transmission network or local distribution system 3.11 non-grid sourced natural gas natural gas non coming from the natural gas network 3.12 odorization addition of odorants to gas (normally odourless) to allow gas leaks to be recognized by smell at trace levels (before accumulating to