DIN EN 16783-2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations German ve.pdf

1、July 2017 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.120.10!%gph“2687769www.din.deDIN

2、 EN 16783Thermal insulation products Product category rules (PCR) for factory made and insitu formed products for preparing environmental product declarations;English version EN 16783:2017,English translation of DIN EN 16783:2017-07Wrmedmmstoffe Produktkategorieregeln (PCR) fr werkmig hergestellte u

3、nd an der Verwendungsstelle hergestellte Wrmedmmstoffe zur Erstellung von Umweltproduktdeklarationen;Englische Fassung EN 16783:2017,Englische bersetzung von DIN EN 16783:2017-07Produits isolants thermiques Rgles rgissant les catgories de produits (RCP) pour les produits manufacturs et forms enplace

4、, destines la prparation des dclarations environnementales des produits;Version anglaise EN 16783:2017,Traduction anglaise de DIN EN 16783:2017-07www.beuth.deDocument comprises 20 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative

5、.06.17DIN EN 16783:2017-07 2 A comma is used as the decimal marker. National foreword This document (EN 16783:2017) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was

6、DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA “Thermal insulation materials (national Mirror Committee to CEN/TC 88 and WG 1 to 9, WG 12 to 23, ISO/TC 61/SC 10, ISO/TC 163 (partly), ISO/TC 163/SC 1 and SC 3)”. EUROPEAN STANDA

7、RD NORME EUROPENNE EUROPISCHE NORM EN 16783 April 2017 ICS 91.120.10 English Version Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations Produits isolants thermiques - Rgles rgissant les catgories de

8、 produits (RCP) pour les produits manufacturs et forms en place, destines la prparation des dclarations environnementales des produits Wrmedmmstoffe - Produktkategorieregeln (PCR) fr werkmig hergestellte und an der Verwendungsstelle hergestellte Wrmedmmstoffe zur Erstellung von Umweltproduktdeklarat

9、ionen This European Standard was approved by CEN on 16 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic

10、al references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

11、of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of M

12、acedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMAL

13、ISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16783:2017 EEN 16783:2017 (E) 2 Contents Page European foreword . 3 Introd

14、uction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Symbols and abbreviations . 5 5 General aspects 6 5.1 Objective of the complementary PCR for insulation products 6 5.2 Types of EPD with respect to life cycle stages covered 6 5.3 Comparability of EPD for construction products

15、 8 5.4 Additional information . 8 5.5 Ownership, responsibility and liability for the EPD . 8 5.6 Communication formats . 8 6 Product Category Rules for LCA . 9 6.1 Product category . 9 6.2 Life cycle stages and their information modules to be included . 9 6.3 Calculation rules for the LCA . 9 6.3.1

16、 Functional unit . 9 6.3.2 Declared unit 9 6.3.3 Reference service life (RSL). 9 6.3.4 System boundaries 10 6.3.5 Criteria for the exclusion of inputs and outputs . 11 6.3.6 Selection of data 11 6.3.7 Data quality requirements 11 6.3.8 Developing product level scenarios 11 6.3.9 Units 11 6.4 Invento

17、ry analysis . 11 6.5 Impact assessment . 11 7 Content of the EPD . 12 8 Project report 12 9 Verification and validity of an EPD 12 Annex A (normative) Applications for thermal insulation 13 Bibliography . 16 DIN EN 16783:2017-07 EN 16783:2017 (E) 3 European foreword This document (EN 16783:2017) has

18、 been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2017,

19、and conflicting national standards shall be withdrawn at the latest by October 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the

20、 CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu

21、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16783:2017-07 EN 16783:2017 (E) 4 Introduction This European Standard provides rules for

22、 the assessment and quantification of parameters describing the environmental impact of thermal insulation products to prepare environmental product declarations. It defines complementary product category rules for thermal insulation products based on the core rules for all construction products est

23、ablished in EN 15804. These rules are intended to be used in conjunction with EN 15804. These PCR apply to all CEN/TC 88 thermal insulation product Standards (EN 13162 to EN 13171, EN 14063-1, EN 14064-1, EN 14303 to EN 14309, EN 14313, EN 14314, EN 14315-1 to EN 14320, EN 14933, EN 14934, prEN 1510

24、0-1, EN 15101-1, EN 15501, EN 15599-1, EN 15600-1, EN 15732, EN 16069) in order to minimize intra-sectoral deviations. These PCR are also valid for thermal insulation products outside of CEN/TC88 and for thermal insulation products involved in other CEN TCs. As in EN 15804, the results from the asse

25、ssment are expressed following the modularity principle in a form that allows aggregation (addition) to provide complete information for construction works. These PCR do not deal with aggregation at the construction works level nor does it describe the rules for applying the environmental parameters

26、 in a construction works assessment. The reduction in energy used and the reduction of emissions produced during the installed life of insulation products exceed by far the energy used and in most cases the emissions occurring during the production, installation and disposal processes. Clause 5.4 of

27、 this European Standard provides the rules for declaration of any such benefits as additional information. NOTE The titles of the clauses in this European Standard follow the EN 15804 to enhance readability. DIN EN 16783:2017-07 EN 16783:2017 (E) 5 1 Scope This European Standard provides the product

28、 category rules (PCR) for Type III environmental declarations (as in EN 15804) for factory made and in situ thermal insulation products. Complementary to EN 15804, the PCR described in this European Standard: specify the declared unit to be used; define the system boundaries for thermal insulation p

29、roducts; specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules. These PCR are intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system bounda

30、ry description. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inc

31、luding any amendments) applies. EN 13172, Thermal insulation products - Evaluation of conformity EN 15804:2012+A1:2013, Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products EN 15942, Sustainability of construction wo

32、rks - Environmental product declarations - Communication format business-to-business EN 15978, Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method EN ISO 9229, Thermal insulation - Vocabulary (ISO 9229) 3 Terms and definitions For the purp

33、oses of this document, the terms and definitions given in EN ISO 9229, EN 15804:2012+A1:2013 and the following apply. 3.1 biogenic carbon carbon derived from/contained in biomass 3.2 biomass material of biological origin excluding material embedded in geological formations and material transformed t

34、o fossilised material 4 Symbols and abbreviations For the purpose of this document, the abbreviations given in EN ISO 9229 and EN 15804 and the abbreviations given in Annex A apply. DIN EN 16783:2017-07 EN 16783:2017 (E) 6 5 General aspects 5.1 Objective of the complementary PCR for insulation produ

35、cts As in EN 15804 and the Scope of this European Standard. 5.2 Types of EPD with respect to life cycle stages covered These PCR identify three main families of EPD: 1) EPD for factory made insulation products; 2) EPD for products intended to be used as in situ insulation products excluding installa

36、tion; 3) EPD for products to be used as in situ insulation products including installation. To be in compliance with this European Standard, the declaration of the product stage modules A1-A3 is required as a minimum for those thermal insulation products that have their applicable technical characte

37、ristics (e.g. thermal resistance) at the factory gate. In addition, for in situ formed thermal insulation products that establish their applicable technical characteristics after activities on site, the declaration of Module A5 “installation” of the construction process stage is also required. The d

38、eclaration of the modules of the other life cycle stages is optional. For each of these EPD, mandatory and voluntary stages to be covered are described as in Figure 1. DIN EN 16783:2017-07 EN 16783:2017 (E) 7 Key m mandatory o optional i mandatory provision of scenario description and technical info

39、rmation Figure 1 Modules 1) EPD for factory made thermal insulation products: a cradle to gate EPD: modules A1, A2 and A3 mandatory; a cradle to gate EPD with options: modules A1, A2 and A3 mandatory, the other modules optional (i.e. cradle to gate and selected further life cycle stages) ; a cradle

40、to grave EPD: modules A to C mandatory DIN EN 16783:2017-07 EN 16783:2017 (E) 8 2) EPD for products intended to be used as in situ thermal insulation excluding installation: a cradle to gate EPD: modules A1, A2 and A3 mandatory and a mandatory description of a scenario for module A5 including the ne

41、cessary activities to obtain the final insulation product out of the product; a cradle to gate EPD with options: modules A1, A2 and A3 mandatory, a mandatory description of a scenario for module A5 including the necessary activities to obtain the final insulation product out of the product. The othe

42、r modules optional (i.e. cradle to gate and selected further life cycle stages); a cradle to grave EPD: modules A to C mandatory. 3) EPDs for products to be used as in situ thermal insulation products including installation: a cradle to gate EPD with options: modules A1, A2, A3 and A5 mandatory, the

43、 other modules optional (i.e. cradle to gate and selected further life cycle stages); a cradle to grave EPD: modules A to C mandatory. 5.3 Comparability of EPD for construction products In principle, the comparison of products on the basis of their EPD is defined by the contribution they make to the

44、 environmental performance of the construction works. Consequently comparison of the environmental performance of construction products using the EPD information shall be based on the products use in and its impacts on the construction works, and shall consider the complete life cycle (all informati

45、on modules). NOTE This is especially true for insulation products of which their main purpose is to reduce the energy consumption in the use stage of buildings. Since the reduction of the environmental impacts due to energy savings during the use stage is in most cases much higher than the environme

46、ntal impacts of the insulation products themselves, it makes more sense to focus on good performance on building level during use than on comparing insulation products. End use applications are defined in Annex A. Cradle to grave analyses shall describe all relevant requirements for the end-use appl

47、ication of the product. 5.4 Additional information As in EN 15804 and additional Annex A of this European Standard. If benefits of insulation products due to energy saving during the installed life are reported in relation to the environmental performance of a building, they shall be reported as add

48、itional information. The environmental impacts shall be calculated using EN 15978. The benefit is the difference between the impacts of at least two insulation levels for the same building considered over the whole life cycle. The scenarios shall be fully described in the EPD and sufficient informat

49、ion given to the verifier to verify this. 5.5 Ownership, responsibility and liability for the EPD A manufacturer or a group of manufacturers are the sole owners and have liability and responsibility for an EPD. 5.6 Communication formats The communication format of the EPD shall be in accordance with EN 15942. DIN EN 16783:2017-07 EN 16783:2017 (E) 9 6 Product Category Rules for LCA 6.1 Product category The product category referred to in this document includes all the thermal insulation products. 6.2 Life cycle stages a