DIN EN 16905-5-2017 Gas-fired endothermic engine driven heat pumps - Part 5 Calculation of seasonal performances in heating and cooling mode German version EN 16905-5 2017《燃气式吸热发动机.pdf

1、June 2017 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 27.080This standard has been includ

2、ed in the body of DVGW Technical Rules.!%g%(“2680205www.din.deDIN EN 16905-5Gasfired endothermic engine driven heat pumps Part 5: Calculation of seasonal performances in heating and cooling mode;English version EN 169055:2017,English translation of DIN EN 16905-5:2017-06Gasbefeuerte endothermische M

3、otorWrmepumpen Teil 5: Berechnung der saisonalen Effizienzkennzahlen im Heiz und Khlmodus;Englische Fassung EN 169055:2017,Englische bersetzung von DIN EN 16905-5:2017-06Pompes chaleur moteur endothermique aliment au gaz Partie 5: Calcul des performances saisonnires en modes chauffage et refroidisse

4、ment;Version anglaise EN 169055:2017,Traduction anglaise de DIN EN 16905-5:2017-06www.beuth.deDocument comprises pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.06.1759DIN EN 16905-5:2017-06 2 A comma is used as the decimal mar

5、ker. Start of application The start of application of this standard is 2017-06-01. National foreword This document (EN 16905-5:2017) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and dom

6、estic gas-fired washing and drying appliances” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-03-01 AA “Domestic, Commercial and Industrial Gas Utilisation”. This

7、 standard has been developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water) and has been included in the body of technical rules and standards for gas issued by the DVGW. EUROPEAN STANDARD NORME EUROPENNE

8、 EUROPISCHE NORM EN 16905-5 March 2017 ICS 27.080 English Version Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode Pompes chaleur moteur endothermique aliment au gaz - Partie 5: Calcul des performances saisonnires en modes chau

9、ffage et refroidissement Gasbefeuerte endothermische Motor-Wrmepumpen - Teil 5: Berechnung der saisonalen Effizienzkennzahlen im Heiz- und Khlmodus This European Standard was approved by CEN on 9 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

10、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standa

11、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the natio

12、nal standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serb

13、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by

14、any means reserved worldwide for CEN national Members. Ref. No. EN 16905-5:2017 EEN 16905-5:2017 (E) 2 Contents Page European foreword . 4 1 Scope 5 1.1 Scope of EN 16905 series 5 1.2 Scope of EN 16905-5 . 5 2 Normative references 6 3 Terms and definitions . 6 4 Part load conditions in cooling mode

15、6 4.1 General 6 4.2 Air-to-air units . 6 4.3 Water-to-air and brine to air units . 6 4.4 Air-to-water units . 7 4.5 Water-to-water and brine-to-water units 8 5 Part load conditions in heating mode 9 5.1 General 9 5.2 Air-to-air units 10 5.3 Water-to-air units and brine to air units . 12 5.4 Air-to-w

16、ater units 13 5.4.1 General . 13 5.4.2 Low temperature application 14 5.4.3 Medium temperature application 17 5.4.4 High temperature application . 20 5.5 Water-to-water and brine-to-water units . 23 5.5.1 General . 23 5.5.2 Low temperature application 23 5.5.3 Medium temperature application 26 5.5.4

17、 High temperature application . 29 6 Calculation methods for reference SPERc . 31 6.1 General . 31 6.2 General formula for calculation of GUEcand AEFc32 6.3 General formula for calculation of EHREgascand EHREelecc. 32 6.4 General formula for calculation of reference SGUEc32 6.5 Calculation of refere

18、nce SAEFc33 6.6 Calculation of reference annual cooling demand (Qref,c) 33 6.7 Calculation of reference SAEFcON. 34 6.8 Calculation of reference SEHREgasc. 34 6.9 Calculation of reference SEHREelecc. 35 6.10 Procedures for the determination of GUEcPL/ AEFcPLvalues 35 6.11 Procedures for the determin

19、ation of EHREgascPL/ EHREeleccPLvalues . 35 6.12 Calculation of reference SPERc36 7 Calculation methods for reference SPERh. 36 7.1 General . 36 7.2 General formula for calculation of GUEhand AEFh. 36 7.3 General formula for calculation of EHREgash. 36 7.4 General formula for calculation of referenc

20、e SGUEh. 37 DIN EN 16905-5:2017-06 EN 16905-5:2017 (E) 3 7.5 Calculation of reference SAEFh. 39 7.6 Calculation of reference annual heating demand (Qrefh) 39 7.7 Calculation of reference SAEFhON. 40 7.8 Calculation of reference SEHREgash. 40 7.9 Calculation of reference SEHREelech. 41 7.10 Procedure

21、s for the determination of GUEhPL/ AEFhPLvalues 41 7.11 Procedures for the determination of SEHREgashPL/ SEHREelechPLvalues . 41 7.12 Calculation of reference SPERh42 Annex A (normative) Determination of reference annual cooling/heating demands and determination of hours for active mode, thermostat

22、off, standby, off mode and crankcase heater mode for reference SAEFcand SAEFhcalculation . 43 Annex B (informative) Calculation example for reference SGUEc, SAEFc, SEHREgasc, SEHREeleccand SPERc. 45 Annex C (informative) Calculation example for reference SGUEh, SAEFh, SEHREgash, SEHREelechand SPERh.

23、 48 Annex D (informative) Adaption of water temperature for fixed capacity 51 Annex E (informative) Compensation method for air to water and water to water units 52 Annex ZA (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 813/

24、2013 aimed to be covered . 53 Annex ZB (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) No 811/2013 aimed to be covered . 55 Bibliography . 57 DIN EN 16905-5:2017-06 EN 16905-5:2017 (E) 4 European foreword This do

25、cument (EN 16905-5:2017) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Stand

26、ard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements

27、of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements

28、of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this document. This standard comprises the following parts under the general title, Gas-fired endothermic engine driven heat pumps: Part 1: Terms and definitions; Part 2: Saf

29、ety (WI 00299025; currently in preparation); Part 3: Test conditions; Part 4: Test methods; Part 5: Calculation of seasonal performances in heating and cooling mode. EN 16905-1, prEN 16905-2, EN 16905-3, EN 16905-4 and EN 16905-5 have been prepared to address the essential requirements of the Europe

30、an Directive 2009/142/EC relating to appliances burning gaseous fuels (see prEN 16905-2:201X, Annex ZA for safety aspects and EN 16905-5:2017, Annex ZA for rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions,

31、 tests methods and seasonal performances calculation methods under Mandate M/535; (see EN 16905-3:2017, Annex ZA, EN 16905-4:2017, Annex ZA, EN 16905-5:2017, Annex ZA and prEN 16905-2:201X, Annex ZB). These documents will be reviewed whenever new mandates could apply. According to the CEN-CENELEC In

32、ternal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

33、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16905-5:2017-06 EN 16905-5:2017 (E) 5 1 Scope 1.1 Scope of EN 16905 series This European Standard speci

34、fies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration,

35、hereafter referred to as “GEHP appliance”. This European Standard only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This European Standard only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2

36、L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3Pand II2Er3Paccording to EN 437. This European Standard only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic co

37、ntrol systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 C during normal operation; d) w

38、here the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar, 2) domestic hot water circuit (if installed) does not exceed 10 bar. This European Standard applies to appliances only when used for space heating or space cooling or for refrigeration, with or

39、 without heat recovery. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Packaged units, single split and multisplit systems are covered by this European Standard. Single duct and double duct units are

40、covered by this European Standard. The above appliances can have one or more primary or secondary functions. This European Standard is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration.

41、 In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. NOTE All the symbols given in this text are used regardless of the language used. 1.2 Scope of EN 16905-5 This part of the EN 16905 series specifies

42、 the calculation of seasonal performance factor for gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery. DIN EN 16905-5:2017-06 EN 16905-5:2017 (E) 6 2 Normative references The following documents, in whole or in part, are normatively ref

43、erenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16905-1, Gas-fired endothermic engine driven heat pumps Part 1: Terms

44、 and definitions EN 16905-4:2017, Gas-fired endothermic engine driven heat pumps Part 4: Test methods 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16905-1 apply. 4 Part load conditions in cooling mode 4.1 General For the purpose of calculation of a

45、pplication SGUEc, SAEFc, SEHREgasc, SEHREeleccand reference SGUEc, SAEFc, SEHREgasc, SEHREeleccas explained in Clauses 6 and 7, the part load ratios mentioned below shall be based on the part load ratio Formulae (1)st column of Tables 1 to 2) and not on the rounded figures as mentioned in the 2nd co

46、lumn of these tables. The calculation of SGUEc, SAEFc, SEHREgasc, SEHREeleccand reference SGUEc, SAEFc, SEHREgasc, SEHREeleccis determined via linear interpolation of the respective part load values at the reference part load conditions mentioned below (A, B, C, D). 4.2 Air-to-air units The part loa

47、d conditions for determining the reference SGUEc(Formula (2), SAEFc(Formula (4), SEHREgasc(Formula (7), SEHREelecc(Formula (8) are given in the following table: Table 1 Part load conditions of air to air units and air-cooled multisplit systems in cooling mode Part load ratio Part load ratio % Outdoo

48、r air dry bulb temperature C Indoor air dry bulb (wet bulb) temperatures C A (3516)/(Tdesignc-16) 100 35 27(19) B (3016)/(Tdesignc-16) 74 30 27(19) C (2516)/(Tdesignc-16) 47 25 27(19) D (2016)/(Tdesignc-16) 21 20 27(19) 4.3 Water-to-air and brine to air units The part load conditions for determining

49、 the reference SGUEc(Formula (2), SAEFc(Formula (4), SEHREgasc(Formula (7), SEHREelecc(Formula (8) are given in the following table: DIN EN 16905-5:2017-06 EN 16905-5:2017 (E) 7 Table 2 Part load conditions of water-to-air and brine-to-air units in cooling mode Part load ratio Part load ratio % Outdoor heat exchanger Indoor heat exchanger Cooling tower bor water loop application Inlet/outlet water temperatures C Ground coupled application (water or brine) Inlet/outlet water temperatures C Dry cooler application Inlet/outle