DIN EN ISO 10456-2010 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 104.pdf

1、May 2010 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91

2、.100.01; 91.120.10!$bX|“1635389www.din.deDDIN EN ISO 10456Building materials and products Hygrothermal properties Tabulated design values and procedures for determining declared anddesign thermal values (ISO 10456:2007 + Cor. 1:2009)(includes Corrigendum AC:2009)English translation of DIN EN ISO 104

3、56:2010-05Baustoffe und Bauprodukte Wrme- und feuchtetechnische Eigenschaften Tabellierte Bemessungswerte und Verfahren zur Bestimmung derwrmeschutztechnischen Nenn- und Bemessungswerte (ISO 10456:2007 + Cor. 1:2009)(enthlt Berichtigung AC:2009)Englische bersetzung von DIN EN ISO 10456:2010-05Matria

4、ux et produits pour le btiment Proprits hygrothermiques Valeurs utiles tabules et procdures pour la dtermination des valeurs thermiquesdclares et utiles (ISO 10456:2007 + Cor. 1:2009)(Corrigendum AC:2009 inclus)Traduction anglaise de DIN EN ISO 10456:2010-05SupersedesDIN EN ISO 10456:2008-04www.beut

5、h.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 31 pages05.10 DIN EN ISO 10456:2010-05 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy

6、use in the built environment”, Subcommittee SC 2 “Calculation methods” (Secretariat: SN, Norway) in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” (Secretariat: SIS, Sweden). The responsible German body involved in its preparation was the

7、Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-92 AA Kennwerte und Anforde-rungsbedingungen. Amendments This standard differs from DIN EN ISO 10456:2000-08 as follows: a) The scope has been extended to include tabulated design values of the

8、rmal and moisture properties of materials, and the title has been modified accordingly. b) An introduction has been added. c) The scope specifies that moisture coefficients are valid only between 0 C and 30 C. d) 4.2 has been added as a new subclause on tests for moisture properties. e) 7.2 has been

9、 extended to contain general information about climates. f) 7.4 contains clarification that ageing factors are not applied if taken into account in declared values. g) 7.5 has been added as a new subclause dealing with convection in insulating materials. h) Clause 8 has been added, giving tabulated

10、design values (in Tables 3, 4 and 5); the data, taken from EN 12524, have been reviewed and updated. i) Annex A contains data reviewed for extruded polystyrene (XPS) and polyurethane (PU). Data are being prepared for PF. Based on EN 10456:2007/AC:2009, the following correction has been made to DIN E

11、N ISO 10456:2008-04: a) Table 4, tenth line of data (Wood fibreboard): In the third column from the left, “0,1” has been replaced with “0,02” and in the fifth column from the left “0,16” has been replaced with “0,03”. Previous editions DIN EN ISO 10456: 2000-08, 2008-04 EUROPEAN STANDARD NORME EUROP

12、ENNE EUROPISCHE NORM EN ISO 10456 December 2007 +AC December 2009 ICS 91.120.10 English version Building materials and products Hygrothermal properties Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009) Matriaux et produits pour l

13、e btiment Proprits hygrothermiques Valeurs utiles tabules et procdures pour la dtermination des valeurs thermiques dclares et utiles (ISO 10456:2007 + Cor. 1:2009) Baustoffe und Bauprodukte Wrme- und feuchtetechnische Eigenschaften Tabellierte Bemessungswerte und Verfahren zur Bestimmung der wrmesch

14、utztechnischen Nenn- und Bemessungswerte (ISO 10456:2007 + Cor. 1:2009) EN 10456:2007 was approved by CEN on 2007-12-07 and Corrigendum AC on 2009-12-01. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta

15、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A ver

16、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denma

17、rk, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISA

18、TIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10456:2007+AC:2009 EContents DIN EN ISO 10456:2010-05 EN ISO 10456:2007 + AC:2009 2

19、Page Foreword to EN ISO 10456:2007 .3 Foreword to EN ISO 10456:2007/AC:20093 Introduction.4 1 Scope5 2 Normative references5 3 Terms, definitions, symbols and units5 3.1 Terms and definitions .5 3.2 Symbols and units.6 4 Test methods and test conditions.7 4.1 Tests for thermal properties.7 4.2 Tests

20、 for moisture properties 7 5 Determination of declared thermal values7 6 Determination of design thermal values.8 6.1 General .8 6.2 Rounding of design values.8 6.3 Design values derived from declared values .9 6.4 Design values derived from measured values .9 7 Conversion of thermal values 9 7.1 Ge

21、neral .9 7.2 Conversion for temperature .9 7.3 Conversion for moisture.10 7.4 Age conversion10 7.5 Natural convection 10 8 Tabulated design hygrothermal values.12 8.1 General .12 8.2 Design thermal values 12 8.3 Design moisture values 12 Annex A (normative) Conversion coefficients for temperature.19

22、 Annex B (informative) Examples of calculations.23 Annex C (informative) Statistical calculations.26 Bibliography28 Foreword This document (EN ISO 10456:2007) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment” in collaboration with Techn

23、ical Committee CEN/TC 89 “Thermal performance of buildings and building components”, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflic

24、ting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document s

25、upersedes EN ISO 10456:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hunga

26、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10456:2007 has been approved by CEN as a EN ISO 10456:2007 without any modifica

27、tion. Foreword to EN ISO 10456:2007/AC:2009 This document (EN ISO 10456:2007/AC:2009) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment” in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building c

28、omponents”, the secretariat of which is held by SIS. Endorsement notice The text of ISO 10456:2007/Cor. 1:2009 has been approved by CEN as EN ISO 10456:2007/AC:2009 without any modification. to EN ISO 10456:2007 DIN EN ISO 10456:2010-05 EN ISO 10456:2007 + AC:2009 3 Introduction This International S

29、tandard provides the means (in part) to assess the contribution that building products and services make to energy conservation and to the overall energy performance of buildings. Heat and moisture transfer calculations require design values of thermal and moisture properties for materials used in b

30、uilding applications. Design values can be derived from declared values that are based on measured data on the product concerned, which is usually the case for thermal insulation materials. Where the design conditions differ from those of the declared value, the data needs to be converted to the app

31、licable conditions. This International Standard provides the methods and data for making this conversion. For materials for which measured values are not available, design values can be obtained from tables. This International Standard provides such tabulated information based on the compilation of

32、existing data (see reference documents listed in the Bibliography). DIN EN ISO 10456:2010-05 EN ISO 10456:2007 + AC:2009 4 1 Scope This International Standard specifies methods for the determination of declared and design thermal values for thermally homogeneous building materials and products, toge

33、ther with procedures to convert values obtained under one set of conditions to those valid for another set of conditions. These procedures are valid for design ambient temperatures between 30 C and +60 C. This International Standard provides conversion coefficients for temperature and for moisture.

34、These coefficients are valid for mean temperatures between 0 C and 30 C. This International Standard also provides design data in tabular form for use in heat and moisture transfer calculations, for thermally homogeneous materials and products commonly used in building construction. 2 Normative refe

35、rences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7345, Thermal insulation Physical quan

36、tities and definitions ISO 8990, Thermal insulation Determination of steady-state thermal transmission properties Calibrated and guarded hot box ISO 12572, Hygrothermal performance of building materials and products Determination of water vapour transmission properties 3 Terms, definitions, symbols

37、and units 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 7345 and the following apply. 3.1.1 declared thermal value expected value of a thermal property of a building material or product assessed from measured data at reference conditions of tempe

38、rature and humidity, given for a stated fraction and confidence level, and corresponding to a reasonable expected service lifetime under normal conditions 3.1.2 design thermal value design thermal conductivity or design thermal resistance NOTE A given product can have more than one design value, for

39、 different applications or environmental conditions. DIN EN ISO 10456:2010-05 EN ISO 10456:2007 + AC:2009 5 3.1.3 design thermal conductivity value of thermal conductivity of a building material or product under specific external and internal conditions, which can be considered as typical of the per

40、formance of that material or product when incorporated in a building component 3.1.4 design thermal resistance value of thermal resistance of a building product under specific external and internal conditions, which can be considered as typical of the performance of that product when incorporated in

41、 a building component 3.1.5 material piece of a product irrespective of its delivery form, shape and dimensions, without any facing or coating 3.1.6 product final form of a material ready for use, of given shape and dimensions and including any facings or coatings 3.2 Symbols and units Symbol Quanti

42、ty Unit cpspecific heat capacity at constant pressure J/(kgK) Faageing conversion factor Fmmoisture conversion factor FTtemperature conversion factor fTtemperature conversion coefficient K1fumoisture conversion coefficient mass by mass akg/kg fmoisture conversion coefficient volume by volume am3/m3R

43、 thermal resistance m2K/W sdwater vapour diffusion-equivalent air layer thickness m T thermodynamic temperature K u moisture content mass by mass kg/kg thermal conductivity W/(mK) water vapour resistance factor density kg/m3 moisture content volume by volume m3/m3aFor conversion of thermal propertie

44、s. DIN EN ISO 10456:2010-05 EN ISO 10456:2007 + AC:2009 6 4 Test methods and test conditions 4.1 Tests for thermal properties 4.1.1 Test methods Measured values of thermal conductivity or thermal resistance shall be obtained using the following methods: guarded hot plate, in accordance with ISO 8302

45、 or equivalent national method; heat flow meter, in accordance with ISO 8301 or equivalent national method; calibrated and guarded hot box, in accordance with ISO 8990. 4.1.2 Test conditions To avoid conversions, it is recommended that measurements be conducted under conditions corresponding to the

46、selected set of conditions given in Table 1. The mean test temperature should be chosen so that the application of the temperature coefficients does not introduce a change of more than 2 % from the measured value. The following testing conditions are required: measured thickness and density for iden

47、tification; mean test temperature; moisture content of the specimen during test; (for aged materials) age of the specimen and conditioning procedures before testing. 4.2 Tests for moisture properties Measured values of water vapour resistance factor or water vapour diffusion-equivalent air layer thi

48、ckness shall be obtained using ISO 12572. 5 Determination of declared thermal values A declared thermal value shall be given under one of the sets of conditions a) or b) in Table 1, with reference temperature I (10 C) or II (23 C). Table 1 Declared value conditions Sets of conditions I (10 C) II (23

49、 C) Property a) b) a) b) Reference temperature 10 C 10 C 23 C 23 C Moisture udryau23,50budryau23,50bAgeing aged aged aged aged audryis a low moisture content reached by drying according to specifications or standards for the material concerned. bu23,50is the moisture content when in equilibrium with air at 23 C and relative humidity of 50 %. DIN EN ISO 10456:2010-05 EN ISO 10456:2007 + AC:2009 7 Either the declared value shall be determined at a thickness large enough to neglec