DIN EN ISO 105-E07-2010 Textiles - Tests for colour fastness - Part E07 Colour fastness to spotting Water (ISO 105-E07 2010) German version EN ISO 105-E07 2010《纺织品 色牢度试验 第E07部分 耐水滴.pdf

1、August 2010 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、59.080.01!$j?“1712898www.din.deDDIN EN ISO 105-E07Textiles Tests for colour fastness Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)English translation of DIN EN ISO 105-E07:2010-08Textilien Farbechtheitsprfungen Teil E07: Farbechtheit gegen Flecken: Wasser (ISO 105-E07:2010)Englisch

3、e bersetzung von DIN EN ISO 105-E07:2010-08Textiles Essais de solidit des coloris Partie E07: Solidit des coloris la goutte deau (ISO 105-E07:2010)Traduction anglaise de DIN EN ISO 105-E07:2010-08SupersedesDIN EN ISO 105-E07:1997-05www.beuth.deIn case of doubt, the German-language original shall be

4、considered authoritative.Document comprises 8 pages07.10 DIN EN ISO 105-E07:2010-08 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile produc

5、ts” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Working Committee NA 062-05-11 AA Farbechtheit von Textilien Deutsche Echtheitskommission DEK. The DIN Standards correspondi

6、ng to the International Standards referred to in this document are as follows: ISO 105-A02 DIN EN 20105-A02 ISO 105-A05 DIN EN ISO 105-A05 ISO 3696 DIN ISO 3696 Amendments This standard differs from DIN EN ISO 105-E07:1997-05 as follows: a) The standard has been editorially revised. b) An instrument

7、al assessment has been included. Previous editions DIN 53955: 1954-01 DIN 54008: 1958-10, 1968-01, 1983-01 DIN EN ISO 105-E07: 1997-05 National Annex NA (informative) Bibliography DIN EN 20105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour DIN EN ISO 105-

8、A05, Textiles Tests for colour fastness Part A05: Instrumental assessment of change in colour for determination of grey scale DIN ISO 3696, Water for analytical laboratory use Specification and test methods EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-E07 April 2010 ICS 59.080.01 Sup

9、ersedes EN ISO 105-E07:1997English Version Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) Textiles - Essais de solidit des coloris - Partie E07: Solidit des coloris la goutte deau (ISO 105-E07:2010) Textilien - Farbechtheitsprfungen - Teil E07:

10、 Farbechtheit gegen Flecken: Wasser (ISO 105-E07:2010) This European Standard was approved by CEN on 22 March 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

11、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made b

12、y translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

13、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMI

14、TEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 105-E07:2010: E2 DIN EN ISO 105-E07:2010-08 EN ISO 105-E07:2010 (E) Contents Page Foreword3 1 Scope 4 2 No

15、rmative references 4 3 Principle4 4 Apparatus .4 5 Reagents.4 6 Test specimen5 7 Procedure .5 8 Test report 5 Bibliography 6 Foreword collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the s

16、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the

17、subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 105-E07:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impl

18、ement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw

19、itzerland and the United Kingdom. Endorsement notice The text of ISO 105-E07:2010 has been approved by CEN as a EN ISO 105-E07:2010 without any modification. This document (EN ISO 105-E07:2010) has been prepared by Technical Committee ISO/TC 38 “Textiles” in 3 DIN EN ISO 105-E07:2010-08 EN ISO 105-E

20、07:2010 (E) 1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated referen

21、ces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour ISO 105-A05, Textiles Tests for colour fastness Part A05:

22、 Instrumental assessment of change in colour for determination of grey scale rating ISO 3696, Water for analytical laboratory use Specification and test methods 3 Principle Drops of water are worked into the specimen with a glass rod, and the change in colour of the textile is assessed with the grey

23、 scale or instrumentally after 2 min and after drying. 4 Apparatus 4.1 Pipette or dropper. 4.2 Glass rod, with a rounded end. 4.3 Grey scale for assessing change in colour, complying with ISO 105-A02. 4.4 Spectrophotometer or colorimeter for assessing change in colour, complying with ISO 105-A05. 5

24、Reagents 5.1 Grade 3 water, complying with ISO 3696. DIN EN ISO 105-E07:2010-08 EN ISO 105-E07:2010 (E) 4 6 Test specimen 6.1 If the textile to be tested is fabric, use a specimen measuring (40 2) mm (100 2) mm. 6.2 If the textile to be tested is yarn, knit it into fabric and use a specimen measurin

25、g (40 2) mm (100 2) mm, or make a wick of parallel lengths (100 2) mm long and about (5 2) mm in diameter, tied near both ends. 6.3 If the textile to be tested is loose fibre, comb and compress enough of it to form a sheet measuring (40 2) mm (100 2) mm. 7 Procedure 7.1 Spot the specimen at room tem

26、perature with grade 3 water (5.1) so that, after working the water into the specimen with the glass rod, a spot of diameter approximately 20 mm is formed. In the case of water-repellent fabrics, the amount of water shall not exceed 0,5 ml. 7.2 After 2 min, assess the change in colour in the peripher

27、y of the spot with the grey scale (4.3) and/or instrumentally (see 4.4). 7.3 Dry the specimen in air at room temperature and again assess the change in colour with the grey scale (4.3) and/or instrumentally (see 4.4). 8 Test report The test report shall include the following information: a) a refere

28、nce to this part of ISO 105 (ISO 105-E07:2010); b) all details necessary for the identification of the sample tested; c) the numerical grey scale rating and/or instrumental assessment for the change in colour of the specimen after 2 min and after drying; d) any deviation, by agreement or otherwise,

29、from the procedure specified. DIN EN ISO 105-E07:2010-08 EN ISO 105-E07:2010 (E) 5 Bibliography 1 ISO 105-A01, Textiles Tests for colour fastness Part A01: General principles of testing 2 ISO 105-J01, Textiles Tests for colour fastness Part J01: General principles for measurement of surface colour 3 ISO 105-J03, Textiles Tests for colour fastness Part J03: Calculation of colour differences 4 AATCC TM 104, Colorfastness to Water Spotting DIN EN ISO 105-E07:2010-08 EN ISO 105-E07:2010 (E) 6