DIN EN ISO 10534-1-2001 Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1 Method using standing wave ratio (ISO 10534-1 1996) Ger.pdf

1、ICS 17.140.01Akustik Bestimmung des Schallabsorptionsgrades und der Impedanzin Impedanzrohren Teil 1: Verfahren mit Stehwellenverhltnis(ISO 10534-1 : 1999)European Standard EN ISO 10534-1 : 2001 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has

2、 been published in accordance with a decision taken by CEN/TC 126 Acoustics to adopt,without alteration, International Standard ISO 10534-1 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Ma-terials Testing Standards Committee),

3、Technical Committee Schalldmpfung und Schallabsorption, Mes-sung und Bewertung.DIN EN ISO 266 and DIN EN 20354 are the standards corresponding to International Standards ISO 266and ISO 354, respectively, referred to in clause 2 of the EN.AmendmentsDIN 52215, December 1963 edition, has been supersede

4、d by the specifications of EN ISO 10534-1, whichis identical to ISO 10534-1.Previous editionDIN 52215: 1963-12.National Annex NAStandards referred to(and not included in Normative references)DIN EN ISO 266 Acoustics Preferred frequencies (ISO 266 : 1997)DIN EN 20354 Acoustics Measurement of sound ab

5、sorption in a reverberation room (ISO 354 : 1985)Ref. No. DIN EN ISO 10534-1 : 2001-10English price group 13 Sales No. 111302.02DEUTSCHE NORM October 2001EN ISO 10534-1Continued overleaf.EN comprises 22 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches In

6、stitut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).AcousticsDetermination of sound absorption coefficient and impedancein impedance tubesPart 1: Method using standing wave ratio (ISO 10534-1 : 1996)English versi

7、on of DIN EN ISO 10534-1Supersedes DIN 52215,Dezember 1963 edition.English versionICS 17.140.01AcousticsDetermination of sound absorption coefficient andimpedance in impedance tubesPart 1: Method using standing wave ratio(ISO 10534-1: 1996) 2001. CEN All rights of exploitation in any form and by any

8、 meansreserved worldwide for CEN national members.Ref. No. EN ISO 10534-1 : 2001 EAkustik Bestimmung des Schallab-sorptionsgrades und der Impedanz inImpedanzrohren Teil 1: Verfahren mitStehwellenverhltnis(ISO 10534-1 : 1996)This European Standard was approved by CEN on 2001-05-13.CEN members are bou

9、nd to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Man

10、agement Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the offic

11、ial versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.EN ISO 10534-1June 2001Management Cen

12、tre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungAcoustique Dtermination du facteurdabsorption acoustique et de limp-dance acoustique laide du tubedimpdance Partie 1: Mthode dutaux dondes stationnaires(ISO 10534

13、-1 : 1996)Page 2EN ISO 10534-1 : 2001ForewordInternational StandardISO 10534-1 : 1996 Acoustics Determination of sound absorption coefficient and impedance in impedancetubes Part 1: Method using standing wave ratio,which was prepared by ISO/TC 43 Acoustics of the International Organization for Stand

14、ardization, has beenadopted by Technical Committee CEN/TC 126 Acoustic properties of building products and of buildings, theSecretariat of which is held by AFNOR, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext

15、 or by endorsement, and conflicting national standards withdrawn, by December 2001 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republi

16、c, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 10534-1 : 1996 was approved by CEN as a European Standardwithout any mo

17、dification.334557121212131416192122Page 3EN ISO 10534-1 : 2001Page 4EN ISO 10534-1 : 2001Page 5EN ISO 10534-1 : 2001Page 6EN ISO 10534-1 : 2001Page 7EN ISO 10534-1 : 2001Page 8EN ISO 10534-1 : 2001Page 9EN ISO 10534-1 : 2001Page 10EN ISO 10534-1 : 2001Page 11EN ISO 10534-1 : 2001Page 12EN ISO 10534-1 : 2001Page 13EN ISO 10534-1 : 2001Page 14EN ISO 10534-1 : 2001Page 15EN ISO 10534-1 : 2001Page 16EN ISO 10534-1 : 2001Page 17EN ISO 10534-1 : 2001Page 18EN ISO 10534-1 : 2001Page 19EN ISO 10534-1 : 2001Page 20EN ISO 10534-1 : 2001Page 21EN ISO 10534-1 : 2001Page 22EN ISO 10534-1 : 2001