DIN EN ISO 10554-2010 Polyamide fibre ropes - Double braid construction (ISO 10554 2009) German version EN ISO 10554 2009《聚酰胺纤维绳索 双层编织结构》.pdf

1、April 2010 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 5

2、9.080.50!$aG“1626136www.din.deDDIN EN ISO 10554Polyamide fibre ropes Double braid construction (ISO 10554:2009)English translation of DIN EN ISO 10554:2010-04Polyamid-Faserseile Doppelgeflechtausfhrung (ISO 10554:2009)Englische bersetzung von DIN EN ISO 10554:2010-04Cordages en fibres de polyamide C

3、ordages coaxiaux (ISO 10554:2009)Traduction anglaise de DIN EN ISO 10554:2010-04SupersedesDIN EN 14685:2005-02www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 9 pages04.10 DIN EN ISO 10554:2010-04 2 A comma is used as the decimal marker.

4、 National foreword This standard has been prepared by Technical Committee ISO/TC 38 “Textiles” (Secretariat: BSI, United Kingdom), Working Group WG 21 “Ropes, cordage and netting (Secretariat: AFNOR, France) in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” (Secret

5、ariat: BSI, United Kingdom), Working Group WG 3 “Ropes and agricultural twines and fishing nets”. The responsible German body involved in its preparation was the Normenstelle Schiffs- und Meerestechnik (Shipbuilding and Marine Technology Standards Committee), Working Committee NA 132-01-08 AA Faser-

6、seile. The DIN Standards corresponding to the International Standards referred to in clause 2 of this document are as follows: ISO 1968 DIN EN ISO 1968 ISO 2307 DIN EN ISO 2307 ISO 9554 DIN EN ISO 9554 Amendments This standard differs from DIN EN 14685:2005-02 as follows: a) EN 14685 has been adopte

7、d as EN ISO 10554. b) The standard has been editorially revised. Previous editions DIN EN 14685: 2005-02 National Annex NA (informative) Bibliography DIN EN ISO 1968, Fibre ropes and cordage Vocabulary DIN EN ISO 2307, Fibre ropes Determination of certain physical and mechanical properties DIN EN IS

8、O 9554, Fibre ropes General specifications EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10554 December 2009 ICS 59.080.50 Supersedes EN 14685:2004English Version Polyamide fibre ropes - Double braid construction (ISO 10554:2009) Cordages en fibres de polyamide - Cordages coaxiaux (ISO 10

9、554:2009) Polyamid-Faserseile - Doppelgeflechtausfhrung (ISO 10554:2009) This European Standard was approved by CEN on 4 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national

10、standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any o

11、ther language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Eston

12、ia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROP

13、ISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10554:2009: EContents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions

14、 .4 4 Designation 4 5 Material .5 6 General requirements5 6.1 Construction.5 6.2 Number of strands.5 6.3 Manufacture, labelling and packaging 5 6.4 Strand interchange 5 7 Physical properties6 8 Marking .7 8.1 Polyamide double braided ropes .7 8.2 Polyamide higher-strength double braided ropes .7 DIN

15、 EN ISO 10554:2010-04 2 EN ISO 10554:2009 (E) Foreword collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by

16、endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. This document supersedes EN 14685:2004. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC

17、shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

18、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10554:2009 has been approved by

19、 CEN as a EN ISO 10554:2009 without any modification. DIN EN ISO 10554:2010-04 3 EN ISO 10554:2009 (E) This document (EN ISO 10554:2009) has been prepared by Technical Committee ISO/TC 38 “Textiles” in 1 Scope This International Standard specifies requirements for double braided ropes and for higher

20、-strength double braided ropes made of polyamide and gives rules for their designation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition o

21、f the referenced document (including any amendments) applies. ISO 1968, Fibre ropes and cordage Vocabulary ISO 2307, Fibre ropes Determination of certain physical and mechanical properties ISO 9554:2005, Fibre ropes General specifications 3 Terms and definitions For the purposes of this document, th

22、e terms and definitions given in ISO 1968 apply. 4 Designation Fibre ropes shall be designated by the following: the words “fibre rope”; the number of this International Standard; the reference number of the rope; the material from which the rope is made; the level of performance of rope: double bra

23、ided rope or higher-strength (hs) double braided rope. EXAMPLE 1 Designation of a double braided rope, reference number 20, corresponding to a linear density of 249 ktex made of polyamide: Fibre rope ISO 10554 - 20 - PA EXAMPLE 2 Designation of a higher-strength (hs) double braided rope, reference n

24、umber 20, corresponding to a linear density of 249 ktex made of polyamide: Fibre rope ISO 10554 - 20 - PA (hs) DIN EN ISO 10554:2010-04 4 EN ISO 10554:2009 (E) 5 Material The mixing of polyamide fibre types and grades shall not be permitted. 6 General requirements 6.1 Construction Ropes produced acc

25、ording to this International Standard shall be constructed in the following way. The rope (see Figure 1) shall be of a double braided construction wherein an inner braid of hollow structure manufactured in a separate operation shall serve as the core, while a cover (outer braid) is braided over it i

26、n a second operation. The weight of either the inner braid or the outer braid shall not exceed 55 % of the total weight of the rope. It shall also conform to ISO 9554. Figure 1 Shape of a polyamide double braided rope and of a polyamide higher-strength double braided rope 6.2 Number of strands For r

27、opes of reference number from 6 to 16: the minimum number of strands of outer braid shall be 16. For ropes of reference number greater than 16: the minimum number of strands of outer braid shall be 24. 6.3 Manufacture, labelling and packaging Manufacture, labelling, packaging, invoicing and delivery

28、 lengths shall conform to ISO 9554. 6.4 Strand interchange 6.4.1 Strand interchange shall be the overlapping continuation of a single interrupted strand (or multiple strand) with another identical strand which follows the identical path in the braid. Although it is desirable that no strand interchan

29、ge be present in the core or the cover of any size and length of rope, some methods of manufacture impose limitations. To compensate for these limitations, strand interchange shall be in accordance with 6.4.2 to 6.4.5. 6.4.2 To allow for a braider malfunction, one strand interchange shall be permitt

30、ed in the core and one in the cover for a standard length of 200 m or less. 6.4.3 For lengths greater than 200 m, additional strand interchanges shall be permitted if deemed necessary by the manufacturer. 6.4.4 In producing the strand interchanges the distance of the overlapping shall be equivalent

31、to 8 times the rope size number but not less than 600 mm for ropes whose reference numbers are 72 and less. Strand interchanges shall be at least 12 m apart measured from interchange centre to interchange centre. 6.4.5 Because strand interchanges within the core are difficult to detect after applica

32、tion of the cover, a record of verifiable information attesting to the number of strand interchanges shall be available to an inspector. DIN EN ISO 10554:2010-04 5 EN ISO 10554:2009 (E) 7 Physical properties The linear density and minimum breaking force shall conform to Table 1. Table 1 Linear densi

33、ty and minimum breaking force of polyamide double braided rope and polyamide higher-strength double braided rope Linear densitybcMinimum breaking forcede kN Reference numberaNominal ktex Tolerance % Double braided rope Higher-strength double braided rope Unspliced ropes Ropes with eye-spliced termin

34、ations Unspliced ropes Ropes with eye-spliced terminations 6 22,4 6,58 5,92 7,89 7,10 8 39,8 10 11,7 10,5 14,0 12,6 10 62,2 18,2 16,4 21,8 19,6 12 89,6 8 26,1 23,5 31,3 28,2 14 122 35,4 31,9 42,5 38,3 16 159 46,1 41,5 55,3 49,8 18 202 58,3 52,5 69,9 62,9 20 249 71,8 64,6 86,2 77,6 22 301 86,7 78,0 1

35、04 94 24 358 103 93 124 112 26 420 121 109 145 131 28 488 140 126 168 151 30 560 161 145 193 174 32 637 183 165 219 197 36 806 231 208 277 249 40 995 284 256 341 307 44 1 200 343 309 412 371 48 1 430 408 367 490 441 52 1 680 5 478 430 574 517 56 1 950 554 499 665 598 60 2 240 635 572 762 686 64 2 55

36、0 723 651 867 780 72 3 220 917 825 1 100 990 80 3 980 1 130 1 017 1 350 1 220 88 4 820 1 360 1 224 1 630 1 470 96 5 730 1 620 1 458 1 940 1 750 104 6 730 1 890 1 701 2 270 2 040 112 7 800 2 190 1 971 2 630 2 370 120 8 960 2 520 2 268 3 020 2 720 128 10 200 2 860 2 574 3 430 3 090 DIN EN ISO 10554:20

37、10-04 6 EN ISO 10554:2009 (E) Table 1 (continued) Linear densitybcMinimum breaking forcede kN Reference numberaNominal ktex Tolerance % Double braided rope Higher-strength double braided rope Unspliced ropes Ropes with eye-spliced terminations Unspliced ropes Ropes with eye-spliced terminations 144

38、12 900 3 620 3 258 4 340 3 910 168 17 600 4 890 4 401 5 870 5 280 192 22 900 5 6 390 5 751 7 670 6 900 216 29 000 8 040 5 236 9 650 8 700 240 35 800 9 920 8 928 11 900 10 700 aThe reference number corresponds to the approximate diameter, in millimetres. bThe linear density, in kilotex, corresponds t

39、o the net mass per length of the rope, expressed in grams per metre or in kilograms per kilometre. cThe linear density is obtained under reference tension and is measured as specified in ISO 2307.dThe breaking forces relate to new, dry ropes. In wet conditions, these values may be lowered.eA force d

40、etermined by the test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other circumstances and situations. The type and quality of terminations, the rate of force application, prior conditioning and previous force applications to

41、the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave may break at a significantly lower force. A knot or other distortion in a rope may significantly reduce the breaking force. 8 Marking 8.1 Polyamide double braided ropes The marking of polyam

42、ide double braided ropes shall be carried out in accordance with Clause 6 of ISO 9554:2005. 8.2 Polyamide higher-strength double braided ropes 8.2.1 For higher-strength ropes with a reference number of less than 14, a central marker yarn in green shall be incorporated into the centre of the rope. 8.2.2 For higher-strength ropes with a reference number greater than or equal to 14, the quality identification on the marker tape shall indicate higher strength (hs). DIN EN ISO 10554:2010-04 7 EN ISO 10554:2009 (E)