DIN EN ISO 10846-3-2003 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3 Indirect method for determination of the dy.pdf

1、ICS 17.140.01Akustik und Schwingungstechnik Laborverfahren zur Messung der vibro-akustischen Transfer-eigenschaften elastischer Elemente Teil 3: Indirektes Verfahren fr die Bestimmung der dynamischenSteifigkeit elastischer Elemente fr translatorische Schwingungen (ISO 10846-3 : 2002)Ref. No. DIN EN

2、ISO 10846-3 : 2003-06English price group 16 Sales No. 111610.03DEUTSCHE NORM June 2003EN ISO 10846-3EN comprises 40 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclu

3、sive right of sale for German Standards (DIN-Normen).Laboratory measurement of vibro-acoustictransfer properties of resilient elementsPart 3: Indirect method for determination of the dynamic stiffness ofresilient supports for translatory motion (ISO 10846-3 : 2002)English version of DIN EN ISO 10846

4、-3European Standard EN ISO 10846-3 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 211 Acoustics(Secretariat: Denmark) to adopt, without alteration, International Standard IS

5、O 10846-3 : 2002 as aEuropean Standard.The responsible German body involved in its preparation was the Normenausschuss Akustik, Lrm-minderung und Schwingungstechnik (Acoustics, Noise Control and Vibration Engineering StandardsCommittee), Technical Committee Sekundrer Schallschutz fr Krper- und Flssi

6、gkeitsschall.DIN EN ISO 266 and DIN ISO 5348 are the standards corresponding to International Standards ISO 266 andISO 5348, respectively, referred to in clause 2 of the EN.National Annex NAStandards referred to(and not included in Normative references and Annex ZA)DIN EN ISO 266 Acoustics Preferred

7、 frequencies (ISO 266 : 1997)DIN ISO 5348 Mechanical vibration and shock Mechanical mounting of accelerometers(ISO 5348 : 1998)English versionICS 17.140.01Acoustics and vibrationLaboratory measurement of vibro-acoustic transferproperties of resilient elementsPart 3: Indirect method for determination

8、 of the dynamic stiffness ofresilient supports for translatory motion(ISO 10846-3 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 10846-3 : 2002 EAcoustique et vibrations Mesurageen laboratoire des proprits detransf

9、ert vibro-acoustique deslments lastiques Partie 3:Raideur dynamique en translation dessupports lastiques (Mthodeindirecte) (ISO 10846-3 : 2002)Akustik und Schwingungstechnik Laborverfahren zur Messung der vibro-akustischen Transfereigenschaftenelastischer Elemente Teil 3: Indirek-tes Verfahren fr di

10、e Bestimmung derdynamischen Steifigkeit elastischerElemente fr translatorische Schwin-gungen (ISO 10846-3 : 2002)This European Standard was approved by CEN on 2002-05-29.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European S

11、tandard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, Germ

12、an).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finla

13、nd, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden,Switzerland, and the United Kingdom.June 2002EN ISO 10846-3Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de Normalisati

14、onEuropisches Komitee fr NormungPage 2EN ISO 10846-3 : 2002ForewordInternational StandardISO10846-3 : 2002 Acoustics and vibration Laboratory measurement of vibro-acoustic transfer propertiesof resilient elements Part 3: Indirect method for determination of the dynamic stiffnessof resilient supports

15、 for translatory motion,which was prepared by ISO/TC 43 Acoustics of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 211 Acoustics, the Secretariat of which is held by DS, as a EuropeanStandard.This European Standard shall be given the status of a na

16、tional standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by December 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement th

17、is European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 10846-3

18、: 2002 was approved by CEN as a European Standardwithout any modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 10846-3 : 2002244568991314181819222324242424242425252525262727272828292931393939Page 4EN ISO 10846-3 : 2002Page 5EN ISO 1

19、0846-3 : 2002Page 6EN ISO 10846-3 : 2002Page 7EN ISO 10846-3 : 2002Page 8EN ISO 10846-3 : 2002Page 9EN ISO 10846-3 : 2002Page 10EN ISO 10846-3 : 2002Page 11EN ISO 10846-3 : 2002Page 12EN ISO 10846-3 : 2002Page 13EN ISO 10846-3 : 2002Page 14EN ISO 10846-3 : 2002Page 15EN ISO 10846-3 : 2002Page 16EN I

20、SO 10846-3 : 2002Page 17EN ISO 10846-3 : 2002Page 18EN ISO 10846-3 : 2002Page 19EN ISO 10846-3 : 2002Page 20EN ISO 10846-3 : 2002Page 21EN ISO 10846-3 : 2002Page 22EN ISO 10846-3 : 2002Page 23EN ISO 10846-3 : 2002Page 24EN ISO 10846-3 : 2002Page 25EN ISO 10846-3 : 2002Page 26EN ISO 10846-3 : 2002Page 27EN ISO 10846-3 : 2002Page 28EN ISO 10846-3 : 2002