DIN EN ISO 11111-5-2016 Textile machinery - Safety requirements - Part 5 Preparatory machinery to weaving and knitting (ISO 11111-5 2005 + Amd 1 2009 + Amd 2 2016) German version E.pdf

1、December 2016 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.120.30; 59.120.40!%K“2596140

2、www.din.deDIN EN ISO 11111-5Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting (ISO 111115:2005 + Amd 1:2009 + Amd 2:2016);English version EN ISO 111115:2005 + A1:2009 + A2:2016,English translation of DIN EN ISO 11111-5:2016-12Textilmaschinen Sicherheitsanfor

3、derungen Teil 5: Vorbereitungsmaschinen fr die Weberei und Wirkerei (ISO 111115:2005 + Amd 1:2009 + Amd 2:2016);Englische Fassung EN ISO 111115:2005 + A1:2009 + A2:2016,Englische bersetzung von DIN EN ISO 11111-5:2016-12Matriel pour lindustrie textile Exigences de scurit Partie 5: Machines de prpara

4、tion au tissage et au tricotage (ISO 111115:2005 + Amd 1:2009 + Amd 2:2016);Version anglaise EN ISO 111115:2005 + A1:2009 + A2:2016,Traduction anglaise de DIN EN ISO 11111-5:2016-12SupersedesDIN EN ISO 111115:200912See start of applicationwww.beuth.deDocument comprises 26 pagesDTranslation by DIN-Sp

5、rachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN ISO 11111-5:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. For DIN EN ISO 11111-5:2009-12 there is a transition p

6、eriod ending on 2016-12-31. National foreword This standard includes safety requirements. This document (EN ISO 11111-5:2016) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories”, Subcommittee SC 8 “Safety requirements for textile machinery” (Secretariat: DIN, Germa

7、ny) in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” (Secretariat: SNV, Switzerland). The responsible German body involved in its preparation was DIN-Normenausschuss Textil und Textilmaschinen (Textilnorm) (DIN Standards Committee Textiles and Textile Machiner

8、y (Textilnorm), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen Sicherheitsanforderungen, Lrmminderung, Bildzeichen. This document includes Amendment 1:2009, approved by CEN on 2009-07-03, and Amendment 2:2016, approved by CEN on 2016-05-05. The

9、start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and # $. DIN EN ISO 11111 consists of the following parts, under the general title Textile machinery Safety requirements: Part 1: Common requirements Part 2: Spinning preparatory and spinning machines Par

10、t 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery This standard contains specifications giving detail to the essential safety and h

11、ealth requirements for design and construction of machines set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the Europ

12、ean Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). DIN EN ISO 11111-5:2016-12 3 The DIN Standards corresponding to the International Standards referred t

13、o in this document are as follows: ISO 9902-1 DIN EN ISO 9902-1 ISO 9902-5 DIN EN ISO 9902-5 ISO 11111-1:2016 DIN EN ISO 11111-1:2016-11 ISO 12100 DIN EN ISO 12100 ISO 13857:2008 DIN EN ISO 13857:2008-06 ISO 23771 DIN EN ISO 23771 IEC 60204-1:2005/A1:2008 DIN EN 60204-1/A1:2009-10 (VDE 0113-1) Amend

14、ments This standard differs from DIN EN ISO 11111-5:2009-12 as follows: a) normative references have been updated; b) a reference to type C standards ISO 9902-1, ISO 9902-5 and ISO 23771 has been added in the scope; c) the specific safety requirements specified in Clause 5 have been rendered more pr

15、ecise; d) the informative Annex ZA has been updated. Previous editions DIN EN ISO 11111: 1995-10 DIN EN ISO 11111-5: 2005-06, 2009-12 DIN EN ISO 11111-5:2016-12 4 National Annex NA (informative) Bibliography DIN EN 60204-1/A1:2009-10 (VDE 0113-1), Safety of machinery Electrical equipment of machines

16、 Part 1: General requirements (IEC 60204-1:2005/A1:2008) DIN EN ISO 9902-1, Textile machinery Noise test code Part 1: Common requirements DIN EN ISO 9902-5, Textile machinery Noise test code Part 5: Weaving and knitting preparatory machinery DIN EN ISO 11111-1:2016-11, Textile machinery Safety requi

17、rements Part 1: Common requirements (ISO 11111-1:2016) DIN EN ISO 12100, Safety of machinery General principles for design Risk assessment and risk reduction DIN EN ISO 13857:2008-06, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

18、 DIN EN ISO 23771, Textile machinery Guide to the design of textile machinery for reduction of the noise emissions EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11111-5 February 2005 + A1 July 2009 + A2 June 2016 ICS 59.120.30; 59.120.40 Supersedes EN ISO 11111:1995English Version Textile

19、 machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005 + Amd 1:2009 + Amd 2:2016) Matriel pour lindustrie textile Exigences de scurit Partie 5: Machines de prparation au tissage et au tricotage (ISO 11111-5:2005 + Amd 1:2009 + Amd 2:2016) Textilmaschin

20、en Sicherheitsanforderungen Teil 5: Vorbereitungsmaschinen fr die Weberei und Wirkerei (ISO 11111-5:2005 + Amd 1:2009 + Amd 2:2016) EN ISO 11111-5:2005 was approved by CEN on 2005-01-21, Amendment A1:2009 on 2009-07-03 and Amendment A2 on 2016-05-05. CEN members are bound to comply with the CEN/CENE

21、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre o

22、r to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the off

23、icial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

24、 Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of

25、exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11111-5:2005 + A1:2009+ A2:2016 EEN ISO 11111-5:2005 + A1:2009 + A2:2016 (E) 2 Contents Page Foreword to EN ISO 11111-5:2005 . 3 Foreword to EN ISO 11111-5:2005/A1:2009 5 European foreword to EN IS

26、O 11111-5:2005/A2:2016 . 6 Introduction 7 1 Scope 8 2 Normative references 8 3 Terms and definitions . 8 4 List of significant hazards 8 5 Significant hazards and corresponding safety requirements and/or measures . 9 5.1 General 9 5.2 Warping, beaming and assembly beaming machines 9 5.3 Sizing equip

27、ment 12 5.3.1 Common requirements of sizing machines 12 5.3.2 Cylinder dryers for sizing lines . 13 5.3.3 Size baths. 14 5.4 Size kettles 16 5.5 Storage equipment for warp beams 18 6 Verification of the safety requirements and/or measures . 19 7 Information concerning machine use . 19 Annex ZA (info

28、rmative) #Relationship between this European Standard and the essential requirements of EU Directive 2006/42/EC aimed to be covered . 20 Annex ZB (informative) !Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC 21 Bibliography . 22 DIN EN ISO

29、11111-5:2016-12EN ISO 11111-5:2005 + A1:2009 + A2:2016 (E) 3 Foreword to EN ISO 11111-5:2005 This document (EN ISO 11111-5:2005) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee C

30、EN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2005, and confl

31、icting national standards shall be withdrawn at the latest by August 2005. This document supersedes EN ISO 11111:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(

32、s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such pat

33、ent rights. NOTE Normative references to International Standards are listed in Annex ZA (normative). This first edition of ISO 11111-5, together with ISO 11111-1, ISO 11111-2, ISO 11111-3, ISO 11111-4, ISO 11111-6 and ISO 11111-7, cancels and replaces ISO 11111:1995, which has been technically revis

34、ed. ISO 11111 consists of the following parts, under the general title Textile machinery Safety requirements: Part 1: Common requirements Part 2: Spinning preparatory and spinning machines Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Preparator

35、y machinery to weaving and knitting Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery Annexes ZA and ZB were added by CEN/CENELEC. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement thi

36、s European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN

37、ISO 11111-5:2016-12 EN ISO 11111-5:2005 + A1:2009 + A2:2016 (E) 4 Endorsement notice The text of ISO 11111-5:2005 has been approved by CEN as EN ISO 11111-5:2005 without any modifications. DIN EN ISO 11111-5:2016-12 EN ISO 11111-5:2005 + A1:2009 + A2:2016 (E) 5 Foreword to EN ISO 11111-5:2005/A1:200

38、9 This document (EN ISO 11111-5:2005/A1:2009) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, the secretariat of which is held by SNV. This Amendment to the European Stand

39、ard 11111-5:2005 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the

40、elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports

41、 essential requirements of EC Directives. For relationship with EC Directives, see informative Annex ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eu

42、ropean Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Unit

43、ed Kingdom. Endorsement notice The text of ISO 11111-5:2005/Amd 1:2009 has been approved by CEN as a EN ISO 11111-5:2005/ A1:2009 without any modification. DIN EN ISO 11111-5:2016-12 EN ISO 11111-5:2005 + A1:2009 + A2:2016 (E) 6 European foreword to EN ISO 11111-5:2005/A2:2016 This document (EN ISO

44、11111-5:2005/A2:2016) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 11111-5:2005

45、shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of thi

46、s document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requ

47、irements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

48、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S

49、weden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11111-5:2005/Amd 2:2016 has been approved by CEN as EN ISO 11111-5:2005/ A2:2016 without any modification. DIN EN ISO 11111-5:2016-12 EN ISO 11111-5:2005 + A1:2009 + A2:2016 (E) 7 Introduction ISO 11111-1 to ISO 11111-7 were prepared simultaneously by ISO/TC 72 and CEN/TC 214 and adopted under the Vienna Agreeme