DIN EN ISO 11111-6-2016 Textile machinery - Safety requirements - Part 6 Fabric manufacturing machinery (ISO 11111-6 2005 + Amd 1 2009 + Amd 2 2016) German version EN ISO 11111-6 2.pdf

1、December 2016 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.120.99!%L“2596141www.din.deD

2、IN EN ISO 11111-6Textile machinery Safety requirements Part 6: Fabric manufacturing machinery (ISO 111116:2005 + Amd 1:2009 + Amd 2:2016);English version EN ISO 111116:2005 + A1:2009 + A2:2016,English translation of DIN EN ISO 11111-6:2016-12Textilmaschinen Sicherheitsanforderungen Teil 6: Maschinen

3、 zur Herstellung textiler Flchengebilde (ISO 111116:2005 + Amd 1:2009 + Amd 2:2016);Englische Fassung EN ISO 111116:2005 + A1:2009 + A2:2016,Englische bersetzung von DIN EN ISO 11111-6:2016-12Matriel pour lindustrie textile Exigences de scurit Partie 6: Machines de production dtoffes (ISO 111116:200

4、5 + Amd 1:2009 + Amd 2:2016);Version anglaise EN ISO 111116:2005 + A1:2009 + A2:2016,Traduction anglaise de DIN EN ISO 11111-6:2016-12SupersedesDIN EN ISO 111116:200912See start of applicationwww.beuth.deDocument comprises 36 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-langu

5、age original shall be considered authoritative.01.17DIN EN ISO 11111-6:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. For DIN EN ISO 11111-6:2009-12 there is a transition period ending on 2016-12-31. National foreword Th

6、is standard includes safety requirements. This document (EN ISO 11111-6:2016) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories”, Subcommittee SC 8 “Safety requirements for textile machinery” (Secretariat: DIN, Germany) in collaboration with Technical Committee CE

7、N/TC 214 “Textile machinery and accessories” (Secretariat: SNV, Switzerland). The responsible German body involved in its preparation was DIN Normenausschuss Textil und Textilmaschinen (Textilnorm) (DIN Standards Committee Textiles and Textile Machinery (Textilnorm), Working Committee NA 106-02-01 A

8、A Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen Sicherheitsanforderungen, Lrmminderung, Bildzeichen. This document includes Amendment 1:2009, approved by CEN on 2009-07-03, and Amendment 2:2016, approved by CEN on 2016 05 05.- -The start and finish of text introduced or altered

9、 by amendment is indicated in the text by tags !“ and # $ DIN EN ISO 11111 consists of the following parts, under the general title Textile machinery Safety requirements: Part 1: Common requirements Part 2: Spinning preparatory and spinning machines Part 3: Nonwoven machinery Part 4: Yarn processing

10、, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery This standard contains specifications giving detail to the essential safety and health requirements for design and construction

11、of machines set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard

12、 and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). .DIN EN ISO 11111-6:2016-12 3 The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 9902-1

13、DIN EN ISO 9902-1 ISO 9902-6 DIN EN ISO 9902-6 ISO 11111-1:2016 DIN EN ISO 11111-1:2016-11 ISO 12100 DIN EN ISO 12100 ISO 13849-1:2015*)DIN EN ISO 13849-1:2016-03 ISO 13850:2015*)DIN EN ISO 13850:2016-05 ISO 13857:2008 DIN EN ISO 13857:2008-06 ISO 14122-2:2001 DIN EN ISO 14122-2:2002-01 ISO 23771 DI

14、N EN ISO 23771 IEC 61496-1:2012*)DIN EN 61496-1:2014-05 (VDE 0113-201) IEC 61496-2:2013*)DIN EN 61496-2:2014-06 (VDE 0113-202) IEC 62061:2005 + A1:2012 + A2:2015*)DIN EN 62061:2016-05 (VDE 0113 Part 50) Amendments This standard differs from DIN EN ISO 11111-6:2009-12 as follows: a) normative referen

15、ces have been updated; b) a reference to type C standards ISO 9902-1, ISO 9902-6 and ISO 23771 has been added in the scope; c) the specification that performance level “d” has to be achieved for the safety function “light curtain in the reed zone”, which requires the use of a type 4 light curtain, h

16、as been included in 5.2.1 as a requirement; d) the informative Annex ZA has been updated. *)International Standard ISO 13849-1:2006, referenced in ISO 11111-6:2005/Amd.1:2009, has been replaced by ISO 13849:2015. *) International Standard ISO 13850:2006, referenced in ISO 11111-6:2005/Amd.1:2009, ha

17、s been replaced by ISO 13850:2015. *)International Standards IEC 61496-1:2004 and IEC 61496-1:2004/Amd.1:2007, referenced in ISO 11111-6:2005/Amd.1:2009, have been replaced by IEC 61496-1:2012. *)International Standard ISO 61496-2:2006, referenced in ISO 11111-6:2005/Amd.1:2009, has been replaced by

18、 IEC 61496-2:2012. *)International Standard IEC 62061:2005, referenced in ISO 11111-6:2005/Amd.1:2009, has been amended by IEC 62061:2005/Amd.1:2012 and IEC 62061:2005/Amd.2:2015. DIN EN ISO 11111-6:2016-12 4 Previous editions DIN EN ISO 11111: 1995-10 DIN EN ISO 11111-6: 2005-06, 2009-12 National A

19、nnex NA (informative) Bibliography DIN EN 61496-1:2014-05 (VDE 0113-201), Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2012) DIN EN 61496-2:2014-06 (VDE 0113-202):2008-02, Safety of machinery Electro-sensitive protective equipment Par

20、t 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006) DIN EN 62061:2016-05, Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005 + A1:2012 + A2:2015)

21、DIN EN ISO 9902-1, Textile machinery Noise test code Part 1: Common requirements DIN EN ISO 9902-6, Textile machinery Noise test code Part 6: Fabric manufacturing machinery DIN EN ISO 11111-1:2016-11, Textile machinery Safety requirements Part 1: Common requirements (ISO 11111-1:2016) DIN EN ISO 121

22、00, Safety of machinery General principles for design Risk assessment and risk reduction DIN EN ISO 13849-1:2016-03, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2015) DIN EN ISO 13850:2016-05, Safety of machinery Emergency stop funct

23、ion Principles for design (ISO 13850:2015) DIN EN ISO 13857:2008-06, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) DIN EN ISO 14122-2:2002-01, Safety of machinery Permanent means of access to machinery Part 2: Working platforms a

24、nd walkways (ISO 14122-2:2001) DIN EN ISO 23771, Textile machinery Guide to the design of textile machinery for reduction of the noise emissions EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11111-6 February 2005 + A1 July 2009 + A2 June 2016 ICS 59.120.30; 59.120.40; 59.120.99 Supersedes

25、 EN ISO 11111:1995 English Version Textile machinery Safety requirements Part 6: Fabric manufacturing machinery (ISO 11111-6:2005 + Amd 1:2009 + Amd 2:2016) Matriel pour lindustrie textile Exigences de scurit Partie 6: Machines de production toffes (ISO 11111-6:2005 + Amd 1:2009 + Amd 2:2016) Textil

26、maschinen Sicherheitsanforderungen Teil 6: Maschinen zur Herstellung textiler Flchengebilde (ISO 11111-6:2005 + Amd 1:2009 + Amd 2:2016) EN ISO 11111-6:2005 was approved by CEN on 2005-01-21, Amendment A1:2009 on 2009-07-03 and Amendment A2 on 2016-05-05. CEN members are bound to comply with the CEN

27、/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cen

28、tre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as th

29、e official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether

30、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All righ

31、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11111-6:2005 + A1:2009 + A2:2016 E dEN ISO 11111-6:2005 + A1:2009 + A2:2016 (E) 2 Contents Page Foreword to EN ISO 11111-6:2005 . 3 Foreword to EN ISO 11111-6:2005/A1:2009 5 European foreword

32、 to EN ISO 11111-6:2005/A2:2016 . 6 Introduction 7 1 Scope 8 2 Normative references 8 3 Terms and definitions . 9 4 List of significant hazards 9 5 Significant hazards and corresponding safety requirements and/or measures . 9 5.1 General 9 5.2 Weaving machines 9 5.2.1 Common requirements of weaving

33、machines 9 5.2.2 Shuttle weaving machines 14 5.2.3 Rapier weaving machines . 15 5.2.4 Pile wire weaving machines (Wilton, pingl, velvet) 16 5.2.5 Gripper weaving machines . 17 5.2.6 Face-to-face weaving machines (pile, heavy fabric or carpet) 17 5.2.7 Water-jet weaving machines 18 5.2.8 Needle type

34、narrow fabric weaving machines 18 5.2.9 Jacquard machines 20 5.3 Knitting (circular, flat and warp knitting) machines 22 5.3.1 Common requirements of knitting machines 22 5.3.2 Circular knitting machines . 23 5.3.3 Flat bed knitting machines . 23 5.3.4 Warp knitting (including stitch bonding) and Ra

35、schel machines 24 5.4 Tufting machines 25 5.5 Storage equipment for beams 27 6 Verification of the safety requirements and/or measures . 29 7 Information concerning machine use . 29 Annex ZA (informative) #Relationship between this European Standard and the essential requirements of EU Directive 200

36、6/42/EC aimed to be covered . 30 Annex ZB (informative) !Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC 31 Bibliography . 32 DIN EN ISO 11111-6:2016-12 EN ISO 11111-6:2005 + A1:2009 + A2:2016 (E) 3 Foreword to EN ISO 11111-6:2005 This docum

37、ent (EN ISO 11111-6:2005) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, the secretariat of

38、 which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn at the latest by August 2005. This document supersedes EN

39、ISO 11111:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this

40、document. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. NOTE Normative references to International Standards are listed in Annex ZA (normative). Th

41、is first edition of ISO 11111-6, together with ISO 11111-1, ISO 11111-3, ISO 11111-4, ISO 11111-5, and ISO 11111-7, cancels and replaces ISO 11111:1995, which has been technically revised. ISO 11111 consists of the following parts, under the general title Textile machinery Safety requirements: Part

42、1: Common requirements Part 2: Spinning preparatory and spinning machines Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Preparatory machinery to weaving and knitting Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery A

43、nnexes ZA and ZB were added by CEN/CENELEC. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

44、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN ISO 11111-6:2016-12 EN ISO 11111-6:2005 + A1:2009 + A2:2016 (E) 4 Endorsement notice The text of ISO 11111-6:2005 h

45、as been approved by CEN as EN ISO 11111-6:2005 without any modifications. DIN EN ISO 11111-6:2016-12 EN ISO 11111-6:2005 + A1:2009 + A2:2016 (E) 5 Foreword to EN ISO 11111-6:2005/A1:2009 This document (EN ISO 11111-6:2005/A1:2009) has been prepared by Technical Committee ISO/TC 72 “Textile machinery

46、 and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 11111-6:2005 shall be given the status of a national standard, either by publication of an identical text

47、 or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsib

48、le for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annex ZA and Z

49、B, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl